Search Results for "schematic"

An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms

...Helpful notifications to let you know if something isn't working. The sliders are connected to 5 (or as many as you like) analog pins on an Arduino Nano/Uno board. They're powered from the board's 5V output (see schematic). The board connects via a USB cable to the PC. The code running on the Arduino board is a C program constantly writing current slider values over its serial interface. The PC runs a lightweight Go client in the background. This client reads the serial stream and adjusts app volumes according to the given configuration file.

DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code

Generates a Network GraphML Schematic from NeDi Database. Use yEd (www.yworks.com) to view/edit schematic. More info: http://forum.nedi.ch/index.php?topic=1250.0

Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

This project makes it possible to switch 8 LEDS over a USB connection. It indicates the CPU work or animations. The following page contains the schematic, firmware ... http://www.cesko.host.sk/IgorPlugUSB_RS232/IgorPlug-USB%20(AVR)%20RS232_eng.htm

Port lwIP and uC/OS-II on a TI C6000 DSP platform. The 10/100M ethernet was based on a DaughterCard designed by ourselves. And it has been tested on TI C6711 DSK & C6713 DSK. The schematic files of the daughtercard is also part of this project.