Open Source uClinux System Software

hdparm - get/set ATA/SATA drive parameters under Linux

This project is an implementation of the Precision Time Protocol (PTP) according to IEEE standard 1588 for Linux.

O nome do projeto no sourceforge.net era apcupsd-brazil e mudou para apcctrl. Caso seu nobreak não seja da APC Brasil (como os modelos importados) utilize o projeto http://www.apcupsd.org/ Esse projeto não é oficial da APC Brasil. É uma solução independente e de código aberto. Não deixe de ler a wiki do projeto. É fundamental para compilar e ter acesso a outras orientações. Modelos suportados: 1) BACK-UPS BR 1200VA (BZ1200BI-BR e BZ1200-BR) *modelos com USB 2) BACK-UPS BR 1500VA (BZ1500PBI-BR e BZ1500BI-BR) 3) BACK-UPS BR 2200VA (BZ2200BI-BR e BZ2200I-BR) 4) SMART-UPS BR 1000VA (SUA1000BI-BR e SOLIS1000BI) 5) SMART-UPS BR 1500VA (SUA1500BI-BR e SOLIS1500BI) 6) SMART-UPS BR 2000VA (SUA2000BI-BR) 7) SMART-UPS BR 3000VA (SUA3000BI-BR) Para entrar em contato, utilize lo formulário no site http://www.apcctrl.com.br

Opensource frimware for platforms based on some SoC (Realtek RTL8186 - Wive-NG, Realtek RTL8671B/RTL8671BH/RTL8672 - Wive-NG-DSL, Ralink RT3050/RT3052 - Wive-NG-RTNL, MT7620/MT7621 - Wive-NG-MT) For detailed discussion of commercial use please mail to info@wi-cat.ru. For more details in russian please go to https://wi-cat.ru Any support for end user only in https://wi-cat.ru/forums/ forum page. Author page: http://wive-ng.sf.net Commercial support support@wi-cat.ru Supported device list: 1) Wive-NG-HQ - latest FW tree (only commercial access) 2) Wive-NG-MT (current) - https://wi-cat.ru/wive-ng/ustroystva-postavlyaemyie-s-os-wive-ng-mt-s-zavoda-2015-2017g/ 3) Wive-NG-RTNL (EOL) - http://wive-ng.sourceforge.net/?WR-NL_RT3050%282%29:Sovmestimye_ustroystva 4) Wive-NG-ADSL (EOL) - http://wive-ng.sourceforge.net/?W422G.v3_8671BH_%284%2F16%29

A secure, feature-rich, customizable embedded Linux network appliance for use in a variety of network topologies. Although it can be used in other ways; its primarily used as a Internet gateway, router, firewall, and wireless access point. LEAF documentation wiki http://bering-uclibc.zetam.org

Small Linux version with MMU less support. uClinux, μClinux and the logos versions are Trademarks of Arcturus Networks Inc. Copyright © 1998 - 2002 D. Jeff Dionne and Michael Durrant Copyright © 2001 - 2018 Arcturus Networks Inc.

Mainly this project aims at easing startup and use of XCSoar (see xcsoar.org) on Kobo Mini. But the scope of use should not be limited solely to XCSoar. The Launcher should be small in code size, reuse most of the original libraries, provide flexible configuration to any application that might be ported to the Kobo Mini. It supports customizable fonts, toolbox-pages, buttons (also graphical), labels, autostart and sleep timers.

A Linux port of the OpenBSD/FreeBSD Cryptographic Framework (OCF). This port aims to bring full asynchronous HW/SW crypto acceleration to the Linux kernel, OpenSwan, OpenSSL and applications using DES, 3DES, AES, MD5, SHA, PublicKey, RNGs and more.

Project ZeroSlackr is a custom iPodLinux installation system. The aim of the project is to provide a simple, coherent, easy-to-use and newbie friendly method of installing iPodLinux on iPods and trying out various emulators, apps, tools and and content.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

This project coordinates the efforts of people to port Linux to the Renesas (formerly Hitachi) SuperH family of processors, including the SH-2, SH-3, and SH-4.

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating unnecessary bottlenecks. The tools described in this project enable the hardware engineer to develop DPR-FPGA systems more effectively for rapid control system development. For more information, related papers and user guide, please refer to: - https://sourceforge.net/p/prhardware/wiki/Home/ - http://www2.ensc.sfu.ca/research/iDEA/personel/victor_lesau.htm

AGanNo2's H3C 802.1X client V2.20-0247 using H3C private protocol extension

Linux port for the Sony Play Station Portable (PSP) gaming system. Based on Jackson Mo's uClinux 2.6.22-uc1 port to the PSP (http://jacksonm88.googlepages.com/linuxonpsp.htm)

Yet another firmware for the Linksys WAG200.

This is only repository binary file. If you interest, visit the website https://gitlab.com/mzdonline/cmu-opkg. For developer to activate package management system on CMU. Developer can easy to build own package .Look at Makefile and opkg/*

The mini-SCST emluate a SCSI target control chip,work with some transport driver (such as qlogic / LSI / TCPIP)

This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool.

The software package repository for <a href=http://sourceforge.net/projects/fsos>FsOS</a>, including EP80579 drivers, SempSec drivers, linux kernel patches and a lot of porting applications for FsOS

the goal of this project is to build a stack for Lonworks Protocol and device working on this protocol

Using Philips (NXP) boards LPC2148, LPC2138 and LPC2103 (ARM7 CPU) we are going to attempt to get an RTOS to work on them, such as MicroC/OSII that has a text based input output using HyperTerminal.

A replacement firmware distribution for the 3com 3CRADSL72 a.k.a 3com wireless 11g (distributed by Ya.com) and its identical twin, the SMC7804WBRA, with an ucLinux kernel based system and associated system tools.

Microstate Accounting is a way to determine exactly where a thread is spending its time. This project provides Linux kernel patches to implement microstate accounting.

Firmware for the Minitar 802.11g Wireless Access Point - MWGAP. This devices runs on the Linux Operating System and this repository will manage the source code for the firmware that runs the device.

Community added next generation firmware extensions to the AMS150 and SBLAN2 NAS devices by FSC, please visit http://forum.fujitsu-siemens.com/digitalhome/viewtopic.php?f=41&t=6997 for details.