Open Source uClinux Networking Software

Opensource frimware for platforms based on some SoC (Realtek RTL8186 - Wive-NG, Realtek RTL8671B/RTL8671BH/RTL8672 - Wive-NG-DSL, Ralink RT3050/RT3052 - Wive-NG-RTNL, MT7620/MT7621 - Wive-NG-MT) For detailed discussion of commercial use please mail to info@wi-cat.ru. For more details in russian please go to https://wi-cat.ru Any support for end user only in https://wi-cat.ru/forums/ forum page. Author page: http://wive-ng.sf.net Commercial support support@wi-cat.ru Supported device list: 1) Wive-NG-HQ - latest FW tree (only commercial access) 2) Wive-NG-MT (current) - https://wi-cat.ru/wive-ng/ustroystva-postavlyaemyie-s-os-wive-ng-mt-s-zavoda-2015-2017g/ 3) Wive-NG-RTNL (EOL) - http://wive-ng.sourceforge.net/?WR-NL_RT3050%282%29:Sovmestimye_ustroystva 4) Wive-NG-ADSL (EOL) - http://wive-ng.sourceforge.net/?W422G.v3_8671BH_%284%2F16%29

A secure, feature-rich, customizable embedded Linux network appliance for use in a variety of network topologies. Although it can be used in other ways; its primarily used as a Internet gateway, router, firewall, and wireless access point. LEAF documentation wiki http://bering-uclibc.zetam.org

A Linux port of the OpenBSD/FreeBSD Cryptographic Framework (OCF). This port aims to bring full asynchronous HW/SW crypto acceleration to the Linux kernel, OpenSwan, OpenSSL and applications using DES, 3DES, AES, MD5, SHA, PublicKey, RNGs and more.

PVNet is a project providing a virtual network interface. It generates numbers of pure virtual ethernet adapter. It is tested for Linux kernel 3.0.8 on amd64 cpu. Its code contains a kernel patch and module code. You can use it to create many ethernet cards. Each device has a single mac address.

This tool is used to develop small applications that can run on MIPS-based embedded Linux devices - mainly WLAN routers. It is possible to debug these applications using GDB with the GDB backend provided by this tool.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

The software package repository for <a href=http://sourceforge.net/projects/fsos>FsOS</a>, including EP80579 drivers, SempSec drivers, linux kernel patches and a lot of porting applications for FsOS

A replacement firmware distribution for the 3com 3CRADSL72 a.k.a 3com wireless 11g (distributed by Ya.com) and its identical twin, the SMC7804WBRA, with an ucLinux kernel based system and associated system tools.

Firmware for the Minitar 802.11g Wireless Access Point - MWGAP. This devices runs on the Linux Operating System and this repository will manage the source code for the firmware that runs the device.

Small but complete enviroment for building custom embedded system (x86 and other). Based on the gentoo system and uclibc-embedded project. Ideal for small hardware like WRAP or Soekris.

Open Linux Router is a toolkit to centralize computer networking and Internet services within an organization. Its goal is to provide secure, alternative, open source solutions to the seemingly standard, but competitive and commercialized IT market.

Q5 is a complete fully open linux based router / network appliance, including hardware. It supports up to four wireless minipci cards and two 10/100 Mbps NICs. The hardware is build around AMD's AU1500 MIPS processor, running at 264 MHz.

Rapid Spanning Tree Protocol (RSTP) implementation for Linux. This project is active on http://git.kernel.org/cgit/linux/kernel/git/shemminger/rstp.git/?h=master but not much forum and support for cross compiling and for bug report and fix. Here it is forked to help and maintain forum.

SIPatHome was based on the SIP Express Router (SER) which is a well-tested, configurable, free and RFC3261-compliant SIP proxy. The project was providing VoIP server software for the embedded Linux distribution OpenWRT on affordable Linksys WRT hardware.

Simple Lossless Ad-hoc Protocol (SLAP) is designed to be used for wireless digital data transfer on embedded systems. The program is built for uClinux, a derivative of Linux designed for embedded microcontrollers, but can be easily ported.

UPnP IGD Controller implementation. Allow to create/destroy portmappings on a UPnP IGD Device, get its external IP, and a lot of other features defined by UPnP standards. The library and client example are well suited for low memory/disk space systems.

AGanNo2's H3C 802.1X client V2.20-0247 using H3C private protocol extension

DHCP Relay Agent X (drax)

flixx is a modification of the router system fli4l. The difference is the support of C++ while staying as compatible as possible to the original system. The project provides the router system itself and a build environment to create custom binaries.

此处仅提供tar.gz压缩包发布和下载，完整的源代码托管于GitHub.com，请访问： https://github.com/liuqun/njit8021xclient