Search Results for "rtc"

mySQM+ Sky Quality Meter/Weather Station (c) R Brown, 2020-2024, All rights reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author(s). EXPANSION BOARDS - You can expand this project using the two types of project expansion boards at https://sourceforge.net/projects/myesp-boards/

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA.

An SNTP client for Virtual PC. It is for machines that do not have a sane time and a working hardware RTC. It synchronize the system time frequently with a nearby NTP server. It uses settimeofday(). It is based on RFC 1769 and RFC 1305.

BioGB was designed with the following properties: 1. It most be as portable as posible. 2. The code most be easy to read.

openchronos-ng is a major rework of openchronos. Compared to openchronos it has the following features: * system message bus for system<->module communication. * hardware RTC timekeeping (no more clock inaccuracy). * rework of timer and ports drivers. * implementation of a module system (drop in applications). * rework of the display routines. * rework of the menu system. The firmware code is also conceptually simpler and smaller which leaves room for more modules (applications).

RealBoy is a Complete, Fast, Accurate, Free/Open-Source Game Boy, Game Boy Color and Super Game Boy Emulator for Linux/Unix.

WARNING: DRAFT VERSION FOR HARDWARE TEST PURPOSE! The intend of this project is mainly to control a 5 channel LED light and to remotely monitor the LED heatsink and water temperature. The LED light simulate random cloud, random lightning during cloud and also manage sunrise and sunset. The system is composed of an Arduino mega 1280, an ethernet shield w5100, an LCD keypad shield 1602, a 3,2" TFT touchscreen, a RTC module DS1307 and 3 DS18B20 one wire temperature sensor. Up and running...

Sharp MZ800 univerzalni karta periferii 1 ----------------------------------------- Contains peripherals: emulator of FDC WD279x, RTC, single channel SIO, repository manager, LAN10Mbit Chips on the card: STM32F101, XC9356, ENC28J60, FT232RL, MAX3232

Lilila manages suspend-wakeup cycles. You can specify awake-intervals, and Lilila will automatically manage RTC timer alarm, to wake the machine up at appropiate time. To manage intervals you can use either CLI or GUI.

Driver module using rtc-driver allowing multiple users to use the real-time-clock. Each task opening the timer device gets its own image of the RTC. Except setting the RTC, all features can be used on a per task basis without frequency restriction.

Timer wakes up the computer from the shut down state using the BIOS clock and alarm time (RTC-Alarm). The computer is booted and a user program is started. A next wake-up (restart by BIOS) is programmed and Timer shuts down the computer again.

Vanilla Kernel support only embedded flash and DM9000 Ethernet controller. This project extend support perepherial on Toradex, Orchild and other evaluation board, and may be, some embedded applications.

An XML-based tool used to schedule uptime spans that uses the Linux real time clock (RTC) daily alarm to automatically power on the system before the span begins. Tools to test whether the system must stay on (attempt to halt) are included.