Search Results for "controller"

Marlin is a popular open source firmware for the RepRap family of 3D printers. It is straightforward, reliable, extensible and adaptable, which is why it is used by many respected commercial 3D printer vendors as well as hobbyists. It runs on inexpensive 8-bit Atmel AVR micro-controllers, with added support for 32-bit and ARM-based boards. Marlin builds can be small enough for use on a headless printer with only modest hardware, and features can be enabled as-needed.

...This project provides a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with boards for SD card mass-storage, instrumentation differential amplifier and RTC. It can help monitoring arrhythmia syndromes such as bradycardia, tachycardia, extra-systoles, pause or flutter. WARNING: In no case it can be use to replace a professional medical examination. Device MUST NOT BE CONNECTED to appliance powered by mains - risk of electrical shocks ************************************************************************************** see also: ECG Logger Viewer application : https://sourceforge.net/projects/ecg-logger-viewer/

wview is a unix application for weather stations. It archives weather data from the station. Generates full html web sites with graphics. ftp/ssh export capability. MySQL/PostgreSQL archiving. International. Weather alarms. Data feed. RSS feed.

A small program for an Arduino compatible micro controller that controls the flight of a model (water-) rocket. It does control the preparation of the recovery system, has automatic launch detection, an apogee detection system, parachute deployment, and safety timers. All this is managed with the most simple one button and one LED user interface.

Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.

Spa/Hot Tub controller based on Z-World's Rabbit single board computer, BL2000. The digial outputs control Solid State relays to switch 240VAC power to the heater element and 120VAC power to the water pump.

An air ride suspension controller based upon the Megasquirt GPIO controller. Controls 4 corner right height and the air compressor. Adjustment will be one knob that will raise or lower the whole car at one time.

Have you ever tried to control a self developed vehicle with your PC? This Project provides a GUi Controll, the schematics for the on board electroninc (including the xbee host) and the atmega 32 / 644 / 2550 software to get things work together.

An universal Lan-to-GPIB adapter for lab instruments using the Egnite Ethernut 2.1; code in AVR C; supports http protocals and able to run cgi scripts; Primary interface is command based; software, firmware, and hardware schematics are all available

Robot controller logic for FIRST Robotics team 1294 from Eastlake High School, including operator interface and autonomous mode.

OCLCC - The Open Cigar Lighter & Coffee machine Controller project

Source code and diagrams for a dual focuser motor controller for a telescope. Includes source for an ASCOM driver that interfaces with the controller.