Search Results for "protocol test harness"

...Objectives: * Develop OpenFOAM and FOAM-extend extensions for turbomachinery applications, including pre-processing, solution methods, and post-processing. * Provide tutorials on how to produce accurate results using OpenFOAM and FOAM-extend in turbomachines. * Distribute relevant validation test cases and corresponding OpenFOAM and FOAM-extend applications. * Provide a test-harness for new releases of OpenFOAM and FOAM-extend. * Provide Best Practice Guidelines for CFD in turbomachines. Find instructions by clicking on the Wiki tab Disclaimer: The trade mark of the OPENFOAM name is held by ESI-OpenCFD. This offering is not approved or endorsed by OpenCFD Limited, producer and distributor of the OpenFOAM software and owner of the OPENFOAM® and OpenCFD® trade marks.

This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the remote system (RTU) and also send commands. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada

The StarFishDAQ (or SFDQ for short) is a platform for developing MCU based hardware without having to start from scratch. It consists of hardware, firmware and software components. The SFDQ allows those projects that would otherwise use an off-the-shelf DAQ, PLC or MCU SBC to start with a stack of hardware, firmware and software. This allows more control, customization, and future applicability without sinking a ton of effort. The SFDQ can be used simply and quickly, as-is in...

jfDataLogger ============ jfDataLogger can log data from PLC controllers. Supports Hardware: - Siemens S7-300/400 PLCs - AllenBradley (CompactLogic Controllers only) - ModBus IP protocol - National Instruments DAQmx System Features: - Trigger bit at start - Save/Load data set - Save Image - log to CSV Website: http://jfdatalogger.sourceforge.net

GET INVOLVED - see General Discussion Skippity is a versatile script-based automation controller for test and measurement instrumentation. It’s ideal for use on the test bench or for automating experiments in the lab. Skippity doesn't rely on instrument specific vendor drivers so it can communicate with both legacy and current commercial instruments and also with devices you've designed and built yourself. Once you've told Skippity about your instruments and their commands using simple...

The PTP daemon (PTPd) implements the Precision Time protocol (PTP) as defined by the IEEE 1588 standard. PTP was developed to provide very precise time coordination of LAN connected computers. PTPd boasts an advanced set of features and is highly configurable.

The IEEE 1905.1 standard describes a convergent digital home network for heterogeneous technologies, such as PLC, WLAN, Ethernet and MoCA. This dissector enables Wireshark to understand, display and analyze IEEE 1905.1 traffic. It is implemented as a LUA script and can thus be easily plugged-into an existing wireshark installation. See the comments at the beginning of the file for hints on how to install the plugin.

This "suite" includes a portable reference implementation and testing tools for ACP245, the automotive Telematics protocol defined by Brazil government. see: http://www.denatran.gov.br/simrav/simrav.asp

LabMonkey is a collection of designs for embedded devices which can be networked together to provide a range of automation, data logging and signal processing functions. A key design objective is to use as little dedicated hardware as possible for communication between nodes in the network, and to be able to adapt the network topology in real-time so as to minimize the occurrence of collisions between packets. To achieve this, a protocol has been designed specifically for the task, and...

Complete manufacturing automation platform for factory and process equipment. It includes multi-protocol communications (including Modbus/TCP), PLC soft logic, HMI, and tools for troubleshooting and installation in 4 comprehensive packages.

RGP: Red General de Posicionamiento (Project Number P022-06/E16 - Junta de Andalucía) -- General Network Positioning based on open software and hardware. This project is the development and test of the standard IEC-60870-5 application layer protocol

LogicAnalyzer is a framework as well as an application to operate a PC based logic analyzer. It's built using the Eclipse RCP and designed with extensibiliy in mind. Integrating new devices or creating completely new functionality is easy.

Test Suite for DICOM-E-Mail Teleradiology Protocol