Search Results for "imu"

...It supports a wide array of robotics formats (URDF, MJCF, CAD), includes GPU-accelerated physics, and features immersive RTX rendering and multisensory simulation. Realistic physics via GPU-accelerated engines and RTX ray tracing. Multi-sensor simulation (RGB-D cameras, Lidar, Radar, IMU, contact sensors). Extensible via platform APIs and can integrate into custom USD-based simulators.

ElectronBot is a desktop-scale robot platform designed for enthusiasts and makers, combining robotics, embedded systems, display, and gesture sensing into a compact mechanical “tool bot”. The project features six degrees of freedom (rotational axes) for arms, neck, and body, allowing expressive motion beyond simple head-tilt or arm-wave. It includes USB communication and a built-in display, enabling it to respond to host computer inputs and act as an interactive peripheral rather than just a...

Project: Olympus is an engineering project that utilizes an Arduino Nano microcontroller to create an electronic payload that records altitude, g-forces experienced by the rocket, as well as roll rate. Included with the code is a 132 page Project Manual that takes you through the design and construction of the electronic payload. It also includes sections on the construction of the Estes Olympus rocket. A detailed code review of each section of code is included. We take a detailed look...

...XIVO runs at 140FPS on stored data (here from a RealSense D435i sensor) or on live streams with a latency of around 1-7ms, depending on the hardware. It takes as input video frames from a calibrated camera and inertial measurements from an IMU and outputs a sparse point cloud with attribute features and 6 DOF pose of the camera. It performs auto-calibration of the relative pose between the camera and the IMU as well as the time-stamp alignment.

...Precision and freedom of movement are still very far from dedicated sensors, however, we believe that the model can be trained and improved by orders of magnitude. We designed an affordable motherboard that runs the Relativty Firmware, it is based on the Atmel SAM3X8E ARM Cortex-M3 processor and uses an MPU-6050 as it’s IMU. The naked PCB and the components to solder on, cost in total about 25 dollars.

Attitude Estimator is a generic platform-independent C++ library that implements an IMU sensor fusion algorithm. Up to 3-axis gyroscope, accelerometer and magnetometer data can be processed into a full 3D quaternion orientation estimate, with the use of a nonlinear Passive Complementary Filter. The library is targeted at robotic applications, but is by no means limited to this. Features of the estimator include gyro bias estimation, transient quick learning, multiple estimation algorithms, tuneable estimator parameters, and near-global stability backed by theoretical analysis. ...