Search Results for "processor system"

...When put together with the AFM scanning hardware (sensor, scanner and their amplifiers) and user interface software it can serve as a standalone SPM system. Otherwise, it can serve as a sub-module for a custom built SPM system, e.g. providing the feedback loop mechanism only. Finally, it can be used as a board for developing advanced sampling techniques, which was the primary goal.

This project delivers Linux support (USB driver and Tools) for a Digital Signal Processor (DSP) cards of the Signal Ranger series, see http://www.softdb.com/product_dsp.shtml for details) connected to a Linux host via USB.

openPOWERLINK is an Open Source Industrial Ethernet stack for communication in hard real-time. It can be operated as both, Managing Node (master) and Controlled Node (slave). With version 2.0, the source code has been cleanly split into an application-oriented user library and a time-critical stack driver. The latter may be moved to a dedicated communication processor or into a kernel module to deliver enhanced performance while still keeping the API in user space. A full documentation...

XMOS based, USB2 audio card, low power consumption, small form factor, 8 synchronous input channels and 4 stereo output channels.

Contains a framework for Coldfire MCUs like 52254. The framework supports a Command Line Interface (CLI) that may work from Serial port, USB or ENET. The framework uses Processor Expert and IDE requirement is MCU Eclipse 10.4 from Freescale. Includes the FunkOS Realtime Operating System by Funkenstein Software Consulting, available at http://funkos.sourceforge.net Mainly it is a support package for the development board Perseus, but I have ported also the RTOS to MCF52233DEMO board. More to come....

QNICE is a simple 16 bit processor intended to teach the basics of hardware design as well as operating system design. A TTL implementation is planned, a FPGA implementation is available here: http://qnice-fpga.com. Currently there exists a C based simulator and an assembler.

ArchC is an open-source architecture description language based on SystemC. Its goal is to provide designers with a tool to evaluate new ideas in processor and ISA design, memory hierarchy, etc. and other aspects of computer architecture research.

The ezLINX iCoupler Isolated Interface Development environment provides developers with a cost-effective, plug and play solution for evaluating eight physical Layer, digitally-isolated communication standards(USB, RS-422, RS-485, RS-232, CAN, SPI, I2C and LVDS). The Blackfin ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards.The Interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler and isoPower® digital isolator technology.

This emulator is capable of providing a faithful replication of the HP48. It also has a debugger for the saturn processor.

The FunnyRobot project designs an educational robot controller that is programmable via USB. Both the hardware and software are configurable and extensible. Users can build programs with a C++ library and run them under a real-time operating system.

Code for the SALAMANDER environmental sensor project. SALAMANDERs are wireless motes (Crossbow TelosB with MSP430 processor) with a string of sensors attached. Mote code is in nesC. DataGetter java code enables mobile phones to collect sensor data.

Tcl n-dimensional array processor

Lightweight matrix lib, especially good for micro-blaze or other embedded processor which needs to do matrix operations. Supports Add, Subtract, Multiply, Transpose, and Invert (Cholesky Method). Compiles to 15kbs using -0s and is ISO C compliant.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

LiteOS is our attempt to write a free OS for calculators known as "TI-68k". TI naturally stands for Texas Instuments while 68k designs the Motorola 68000, in other words the processor running such calculators.

beetleOS is a small and flexible real time OS for embedded systems with preemptive multitasking. It also provides a lightweight device-driver framework. It is basically programmed for the ARM7 processor architecture but it could be ported to other archit

Mateo Control System is currently being redesigned for our custom mainframe.