Search Results for "ghost 4 linux"
Sort By:
Showing 133 open source projects for "ghost 4 linux"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
1
Watchy
An open source E-ink smartwatch
Watchy, an open-source E-Ink smartwatch. Watchy is an E-Paper watch with open-source hardware and software. It has a barebones design utilizing the PCB as the watch body, allowing it to be worn as-is, or further customized with different 3D printed cases and watch straps. It is a unique timepiece that is also a wearable development platform, allowing users to create their own experience. Ultra-low-power e-paper 1.54″ display with 200 x 200 resolution and wide viewing angle. Wi-Fi & Bluetooth... -
2
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface... -
3
GCBASIC is an open-source BASIC compiler for 8 bit Microchip PIC, Atmel AVR legacy, AVRDx and LGT microcontrollers. See https://ko-fi.com/post/The-Story-of-GCBASIC-Making-Microcontroller-Progr-D1D319SJ72 for story of GCBASIC. This is a continuous release project. The latest release is always available. This will give you the most complete development toolchain to create and program 8-bit PIC, AVR and LGT microcontrollers. We have added new capabilities that make GCBASIC the...
-
4
A series of open source files and programs available to use for developing programs to work with the WowWee Robotics RSMedia Robot. These include a USB serial console, a cross-compiler, a firmware dump program, text-to-speech and source code.
-
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
5
Tiny Multi Bootloader+
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its... -
6
INDI Sharp
INDI C# Client
This project consist in a .NET/Mono assembly containing a simple INDI client and a WinForm that permits to connect to astronomical equipment INDI server, and to use drivers connected at it. -
7
The Player Project: Player is a networked interface to robots and sensors. Stage and Gazebo are Player-friendly multiple-robot simulators. The software aims for POSIX compliance and runs on most UNIX-like OS's. Some parts also work on Windows.
-
8
OSDLab
Open Source Digital Laboratory
Open Source Digital Laboratory compatible with Arduino project. This software consists from C++/Qt programs such as dotScope (https://dotscope.sourceforge.io) - is a scientific shell for live experiment, dlCAM (https://dlcam.sourceforge.io) - computer aided manufacture for Arduino and others projects, img-map (https://img-map.sourceforge.io) - image digitaizer. -
9
iqr is a simulation software to graphically design and control large-scale neuronal models. Simulations in iqr can control real-world devices in real-time. iqr can be extended by new neuron, and synapse types, and custom interfaces to hardware.
-
Train ML Models With SQL You Already KnowBuild and deploy ML models using familiar SQL. Automate data prep with built-in Gemini. Query 1 TB and store 10 GB free monthly.
-
10
rtkinstaller
FreeSensors/Robotikit installer
Instalador de las librerías necesarias para Arduino IDE y para Ardublock del proyecto de Robótica Educativa FreeSensors, usado en los kits de Robotikit. -
11
5dpo Components for Lazarus
5dpo Components for Lazarus
5dpo Component Library for Lazarus (Sdpo) provides a comport (serial port) component, an UVC video driver component for webcams, a Gtk fast painting form and a Joystick component. -
12
FactoryController
Floor-level factory/shop automatization control software
Floor-level factory/shop automatization control software. MODBUS realtime network & devices controller. Hi-level task-centric parallel execution scenaries. MRP/ERP integration. -
13
A scheme (lisp) interpreter written in ARM assembly language (currently: Cortex-M4F,M7, Cortex-A5,A8,A9, Cortex-A53; previously:ARM7TDMI, ARM920T, Cortex-M3) for education, robotics, wearable devices. Tested on Allwinner A64, Amlogic S905, Atmel SAMA5D4, SAME70, SAMV71, NXP LPC4300, RT1050, iMX8M, Samsung S5P6818, ST STM32F4, STM32F7, and TI AM3359, OMAP3530, DM3730, OMAP4430, TM4C1294 chips (previously: NXP LPC-1300,1700,2000, ATMEL AT91SAM7, STM STR711, STR911, STM32, CIRRUS EP9302, LMI...
-
14
openCONFIGURATOR Eclipse Plugin
An eclipse plugin for the openCONFIGURATOR configuration tool
Eclipse update site: http://sourceforge.net/projects/eclipse-plugin.openconf.p/files/update-site/ KNOWN ISSUE WITH THE UPDATE SITE DUE TO SOURCEFORGE ENCRYPTION POLICIES: If you experience problems with the SSL handshake during update please refer to http://gnuarmeclipse.github.io/blog/2017/01/29/plugins-install-issue/ Install via Eclipse marketplace: https://marketplace.eclipse.org/content/ethernet-powerlink-openconfigurator The project provides a plugin for the... -
15
Robotics Library
C++ framework for robot kinematics, dynamics, motion planning, control
The Robotics Library (RL) is a self-contained C++ library for rigid body kinematics and dynamics, motion planning, and control. It covers spatial vector algebra, multibody systems, hardware abstraction, path planning, collision detection, and visualization. -
16
-
17
Spark is a physical simulation system. The primary purpose of this system is to provide a *generic* simulator for different kinds of simulations. In these simulations, agents can participate as external processes.
-
18
pyGerber2Gcode
Python Gerber to G-code converter
pyGerber2Gcode is a Pyhon based simple Gerber to G-code converter. -
19
Arduino Multiple Controller for Windows
A Windows app to control Arduino devices via serial port or ethernet
Features: 1.Controls Arduino via Serial port and Ethernet(web) 2.Has 4 controls: Button,Voice,Command, Home automation (WEB). 3.Personalize themes. -
20
8 Sounds USB
Summary
XMOS based, USB2 audio card, low power consumption, small form factor, 8 synchronous input channels and 4 stereo output channels. -
21
SwisTrack 4 is a powerful software for tracking robots, humans, animals and objects using a camera or a recorded video as input source. It contains interfaces for USB, FireWire and GigE cameras, as well as AVI files.
-
22
(RoboSim) Robot Simulator
(RoboSim) Java based Robot Localization and Path Planner Simulator.
Java based portable simulator to visualize and understand the Robot Localization, Path planning, Path Smoothing and PID controller concepts. It is very flexible and easy to use. It supports multiple platforms. The source code is available on Github where you can find latest development and up-to-date documentation. Source : https://github.com/habsoft/robosim Blog : https://robosimblog.wordpress.com Note : Use jre 1.7 to run it. 1.Histogram Filter 2.Histogram Filter with Sonar... -
23
iCub is an open platform for scientists interested in investigating issues in embodied cognition. Here you find all the software and hardware documentation.
-
24
Easy CNC
Modular CNC software for Arduino controller
The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters. -
25
ManyEars implements real-time microphone array processing to perform sound source localisation, tracking and separation. It was designed for mobile robot audition in dynamic environments. NOTE: Development will continue on github : https://github.com/introlab/manyears
