Search Results for "tcp"

CoreBus is a cross-platform terminal for working with serial ports and TCP sockets with support for Modbus TCP/RTU/ASCII protocols. Features: No Protocol * Working with data in string or byte format * Support for different encodings * There are three sending modes: single, cyclic, and file sending Modbus * Support for various Modbus protocol variations: TCP, RTU, ASCII and RTU/ASCII over TCP * Convenient operation with recording functions * The ability to work with float numbers * The ability to work with binary data * A Modbus scanner that searches for devices on a communication line Modbus monitoring * Convenient display of registers * Conversion to numeric types * Transformations by formula * Real-time charting * Logger Macros * Separate macros for each operating mode * A macro consists of an unlimited number of commands (actions) * Common Slave ID for Modbus macros * Import/Export Source code: https://github.com/AndreyAbdulkayumov/CoreBus

...Arduino GSM library uses 15868 bytes (49%) of Flash and 1113 bytes (54%) of RAM in a similar scenario. TinyGSM also pulls data gently from the modem (whenever possible), so it can operate on very little RAM. Now, you have more space for your experiments. TCP (HTTP, MQTT, Blynk, ...) All modules support TCP connections. Most modules support multiple simultaneous connections. TCP and SSL connections can usually be mixed up to the total number of possible connections. Many GSM modems, WiFi, and radio modules can be controlled by sending AT commands over Serial. TinyGSM knows which commands to send, and how to handle AT responses, and wraps that into the standard Arduino Client interface.

...The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout.

FactoryController testing/verification tool. Simulate MODBUS-TCP industrial network with set of devices. Update 2017: Hardware Emulator project has been integrated to main FactoryController codebase and this repository is obsolete.

lobots is a robot simulator featuring 3D graphics using OpenGL and GLUT libraries. It provides a client/server model, supporting multiples robot clients remotely connected on a TCP/IP network.

NEW 0.13.0 OpenShowVar is a free Linux, Mac OSX and Windows TCP client for serving as an interface to KUKA Robots. OpenShowVar implements an easy protocol for reading and writing Robot variables used inside a the Robot movement programs. KUKAVARPROXY and OpenShowVar are buit by IMTS s.r.l. Company. www.imts.eu

A high-performance and ease-of-use implementation of the Modbus protocol written in Java by Infinite Automation Systems Inc.. Supports ASCII, RTU, TCP, and UDP transports as slave or master, automatic request partitioning and response data type parsing. For commercial licenses see www.InfiniteAutomation.com Get the most recent code here: https://github.com/infiniteautomation/modbus4j For support: http://infiniteautomation.com/forum/category/11/modbus4j-general-discussion

Have you ever tried to control a self developed vehicle with your PC? This Project provides a GUi Controll, the schematics for the on board electroninc (including the xbee host) and the atmega 32 / 644 / 2550 software to get things work together.

roboerc implements JAUS standard 3.3. It provides the necessary virtual networking library for JAUS message over TCP, UDP, Serial. It also uses JAUS switches to route JAUS messages across seperated virtual network.

Articulated arm (Mitshubishi's RV-M1 Movemaster) support for Cyberbotics' Webots simulation package. Offers seamless control of simulated arm via TCP/IP, and adequate client-side bridges for simulation (TCP/IP) and live robot (RS232).