Search Results for "two" - Page 2

Design and build two autonomous robots (A and B) that can complete a total of four laps of a relay race. At the start, Robot A must begin behind the start line with a golf ball onboard that represents a mailbag. After completing the first lap, Robot A must pass the golf ball to Robot B in the space between the start and finish lines. This sequence continues until Robot B crosses the finish line on the 4th lap.

Cherokee is a fully extensible and scriptable automation engine for any and all java applets. To make it work for your favorite java applet the most you have to do is write is two classes.

This project is a part of a mini project required by the Mechatronics-2 course for the 4th year Mechatronics class in faculty of engineering Ainshams university. The mini project involves the control of an articulated robotic arm which resembles a human arm. The control is done via tele-manipulation which is done by the tracking of 4 IR LEDs fixed at the joints of the controller arm. This code is the part of the project responsible for the interfacing with the wiimote, stereo-triangulation of the wiimote data and determining the 3D coordinates of the IR LEDs.

USB 2.0 for Real-Time provide a hard real-time capable implementation of an USB 2.0 stack on top of Linux/Xenomai. It implements the stack core and EHCI, UHCI and OHCI host controller drivers.

The ETHNOS environment is composed of: 1) ETHNOS-6, a dedicated distributed real-time operating system (developed as an extension to Linux), from which the overall environment takes its name, supporting different high level representation, communication, and execution requirements, 2) a dedicated network protocol designed for both the single robot and the multi-robot environment, specifically designed for noisy wireless communication, 3) an object oriented Application Programming Interface (API) based on the C++ language (and a subset based on Java), 4) a set of additional development tools (a robot simulator, a Java-applet template, etc.). ...

A robotic DIY styrofoam cutter consisting of one rotational and two translational axes. It cuts a variety of shapes out of styrofoam-like materials using a hot wire. This project documents the necessary hardware and software parts. Don't miss the follow-up project at http://raumschaum.org Its goal is to further develop hardware and software into an user friendly application.

Software Infrastructure for Stanford's Autonomous Vehicles

Please go to pandorarobotics.sf.net for this project.

This is the RoboCup Mixed Reality Project: a standard research and educational platform integrating cutting edge and low cost watch technology into a miniature multi-robot system which mixes reality and simulation.

pydaqtools provides a common interface to data-acquisition hardware for Python. Control analog/digital output or acquire analog/digital input for immediate analysis with Python for scientific, educational or engineering applications.

This is a open source 3D laser scanner targeted for CNC machinery but not only.

The 'LPT Interface' application is great for students. With 'LPT Interface' pupils can write & read the parallel port's: Data Port (8 bit), Control Port (4 bit) and read Status Port (4 bits).

Parallel Reinforcement Evolutionary Artificial Neural Networks (PREANN) is a framework of flexible multi-layer ANN's with reinforcement learning based on genetic algorithms and a parallel implementation (using XMM registers and NVIDIA's CUDA).

This project's aim is to build a 3D simulation environment to control a hexapod, and communicate serially to said hexapod when connected. This way new motion algorithms can be perfected without damaging your robot.

A Java library that works with Java3D to simulate and visualize, in real-time, dynamics of multiple rigid bodies that are restricted by implicit and explicit constraints (e.g., robotics); designed for efficiency, ease-of-use, and extensibility.

JSiBo is a small and extensible simulator for mobile robot with differentially steered drive system. It provides the end user with a simple way to test algorithms, by writing them in Java language.

Simple application for wireless (Bluetooth) LEGO NXT robots controlling (First pre-alpha release will be uploaded at the end of February)

RobotSee is a language as easy as Basic, with the power of C. The RobotSee VM is a virtual machine that will run on anything from a small 8bit machine all the way up to a linux/windows class machine.

this project deals with the planning and fast replanning of safe motions.

C++ library for interacting with Devantech / Robot Electronics SD84 USB multi-I/O device. OS X / Darwin + Linux are target platforms, but only serial code should require porting for others. SD84 site: http://www.robot-electronics.co.uk/htm/sd84tech.htm

A python-tkinter kit to experiment with the generation and solving of mazes.

This project implements an On Screen Display for FPV (First Person View) for RC planes. Sends telemetry data from GPS & sensors embebed with video information.

Platform supporting machine learning on different objects by different modification of the JSM method (for now). Predicates for the JSM method are written in CLIPS.Objects and modification of the JSM method have to written on one of .NET languages.

camvox is a CSG, voxel and tool path library for generating multi-axis tool paths for milling machines.

This is a Robot simulation game that allows you to write a robot in any language you might want. The robot communicates with the game using the internet and up to 32 robots can be run at a time. WARNING: The current version is not complete!