Search Results for "can"
Sort By:
Showing 34 open source projects for "can"
View related business solutions-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
1
ElectronBot
ElectronBot is a mini desktop robot
...It includes USB communication and a built-in display, enabling it to respond to host computer inputs and act as an interactive peripheral rather than just a static automaton. The creator provides full source materials—mechanical (3D printed or CNC parts), electronics (PCBs, custom boards), firmware and drivers—so someone can build or modify the robot themselves. The platform also integrates computer vision or gesture sensing (for example, keypoint detection of human pose) so the bot can respond dynamically to a person’s presence or movement. -
2
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information... -
3
Phobia
Phobia Motor Controller
PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport. -
4
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. ... -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
5
Tiny Multi Bootloader+
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
...This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset -
6
openPOWERLINK
An Open Source POWERLINK Stack
...A full documentation of the stack is available on the web site: http://openpowerlink.sourceforge.net The following page can be used to report a security vulnerability: https://sourceforge.net/p/openpowerlink/discussion/ -
7
haikuVM
A Java VM for ARDUINO and other micros using the leJOS runtime.
HaikuVM has been started for hobbyists who develop applications for ARDUINO to open the world of JAVA and leJOS. Yes, you can program an ARDUINO with JAVA! HaikuVM is so small that it even runs on an atmega8 (and the ASURO robot). And yes, you can program an ASURO robot with JAVA! And since version 1.4.0 the RCX lego brick. -
8
Wi-Fi Ducky
Upload, save and run keystroke injection payloads with an ESP8266
...Although the ESP8266 is awesome, it doesn't have a native USB, which means it can't act as a keyboard. The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine. -
9
Digital PID Controller MSP432
Digital PID Controller Using MSP432
The code in this repository is old and I don't like the sourceforge interface. You can get the code that was running in the video here: https://github.com/arduinoNube/digital-pid-classroom-demo This was a class demonstration I developed for a mechatronics class. Feel free to contact me about getting design files, code, a little help, etc. It demonstrates proportional, integral, and derivative controllers and their features as well as anti-windup and control loop update rate. ... -
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
10
Tardyon Drive AVR Stepper Controller
AVR-based single axis stepper motor controller
This project provides an AVR-based, USB accessible, single-axis motion controller that can fit into an USB-connector completely and therefore is probably the worlds smallest stepper motor controller. Here both, hardware schematics and all software components are provided. -
11
qspline CC0
qspline (Quaternion Cubic Spline) under the CC0 license
Quaternion Cubic Spline by James McEnnan Qspline does quaternion interpolation such that the quaternion and angular rate and acceleration vectors are continuous functions of time, while maintaining quaternion normalization. This project releases the core functions (in qspline.c) under the CC0 license (Public Domain). The original project can be found here: http://sourceforge.net/projects/qspline/ The documentation can be found in the original project here: http://qspline.sourceforge.net/qspline.pdf -
12
MIT SPHERES Simulation (Release)
MIT's spacecraft simulator for control algorithm development
...Algorithms may be implemented in C or Embedded MATLAB and executed in the MATLAB simulation environment to verify general desired behavior. With some limitations, the code used in the simulation can be directly transferred to the SPHERES hardware. We are sharing this project with the public to gather more interest for SPHERES Guest Scientists. Feel free to use and contribute to this code base, just don't forget to credit the MIT Space Systems Lab if you distribute any results. -
13
nxtOSEK is an RTOS for LEGO Mindstorms NXT. nxtOSEK consists of I/O driver part of LEJOS NXJ, TOPPERS/ATK1 RTOS, and glue code for them. You can write applications for NXT in ANSI-C/C++. Check nxtOSEK site: http://lejos-osek.sourceforge.net
-
14
Here you can find the following Tools and libs for the famous ASURO robot. ASUROLIB: C library for the ASURO. ASURINO+ASUROBOOT: An Arduino library and Arduino/STK500v1 compatible Bootloader for the ASURO.
-
15
LinuxCNC controls CNC machines. It can drive milling machines, lathes, 3d printers, laser cutters, plasma cutters, robot arms, hexapods, and more.
-
16
Slidee project designs an open source microprocessor controlled camera slider/dolly, used for timelapse photography as well filmmaking projects. The slidee and the controller is designed out of commonly available construction hardware and Arduino microprocessor, so that any hobbyist can construct it in the home garage workshop. The goal of the project is to make this slidee the most versatile and affordable microprocessor controlled slider for the photographers and filmmakers.
-
17
OpenRDK (OPENsource Robot Development Kit) is a modular software framework that can be used by developers in their research in robotics and artificial intelligence. This project has been moved to https://github.com/madmage/openrdk
-
18
blutle
Small wireless board to control tiny DIY toys over bluetooth
Being powered with cell phone battery, this board can drive small toys - up to two DC motors, several input/output pins, discharge control. -
19
RaptorAndroid
Movile robot controlled through bluetooth interface on Android
Movile robot controlled throught bluetooth interface on Android. Can control up to three motors. Radar. Measure light intensity, voltage, temperature, current. Open Source Hardware. -
20
It's an object-oriented library written in C++ for creating arbitrary kind of neural networks. The user can use the classes provided to create neural network with arbitrary topology and mixed type of neurons. It's very easy add custom neurons.
-
21
guileplayer is a Scheme binding for libplayerc - the Player client library, part of Player/Stage project. It can be used with guile (GNU Scheme interpreter) version 1.6 or later.
-
22
This repository is now frozen. The latest version of the RepRap project can be found at https://github.com/reprap.
-
23
lib_3d_mec_ginac is a library for symbolic multibody system dynamics. It can be used standalone, although it will be the kernel substitute of future version 3.0 of 3d_mec (http://www.imac.unavarra.es/3d_mec).
-
24
The FunnyRobot project designs an educational robot controller that is programmable via USB. Both the hardware and software are configurable and extensible. Users can build programs with a C++ library and run them under a real-time operating system.
-
25
A curriculum is made to be read by users to improve their skills in a specific topic. In our case we develop on robotics, Webots and the e-puck robot. The documentation can be found here: http://en.wikibooks.org/wiki/Cyberbotics%27_Robot_Curriculum