Search Results for "can"
Sort By:
Showing 132 open source projects for "can"
View related business solutions-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
1
Arduino libraries
Arduino libraries and code
...For improvements and changes, please provide a pull request. I will try to follow up on them asap but it can take quite some time. Please try to be generic in your improvements and try to see "over the needs of your own application". -
2
NVIDIA Isaac Sim
NVIDIA Isaac Sim is an open-source application on NVIDIA Omniverse
...Realistic physics via GPU-accelerated engines and RTX ray tracing. Multi-sensor simulation (RGB-D cameras, Lidar, Radar, IMU, contact sensors). Extensible via platform APIs and can integrate into custom USD-based simulators. -
3
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information... -
4
ElectronBot
ElectronBot is a mini desktop robot
...It includes USB communication and a built-in display, enabling it to respond to host computer inputs and act as an interactive peripheral rather than just a static automaton. The creator provides full source materials—mechanical (3D printed or CNC parts), electronics (PCBs, custom boards), firmware and drivers—so someone can build or modify the robot themselves. The platform also integrates computer vision or gesture sensing (for example, keypoint detection of human pose) so the bot can respond dynamically to a person’s presence or movement. -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
5
WS2812FX
WS2812 FX library for Arduino and ESP8266
This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each segment's mode, color, speed, and direction (normal or reverse). ... -
6
RobotsTxt
The repository contains Google's robots.txt parser
...It implements the core semantics of the Robots Exclusion Protocol: user-agent sections, Allow/Disallow directives, wildcard handling, and precedence rules. The code is optimized for speed and low memory so large crawls can evaluate millions of URLs quickly. It also focuses on correctness—edge cases like overlapping patterns and longest-match resolution are handled consistently. Consumers integrate it to decide whether a specific URL may be fetched by a particular bot name and to respect crawl-delay or sitemaps hints where applicable. The library serves both search-scale crawlers and smaller tools that need a reliable decision engine for polite crawling. -
7
DynamixelSDK
ROBOTIS Dynamixel SDK (Protocol1.0/2.0)
DYNAMIXEL SDK is a software development kit that provides DYNAMIXEL control functions using packet communication. The API of DYNAMIXEL SDK is designed for DYNAMIXEL actuators and DYNAMIXEL-based platforms. You need to be familiar with C/C++ programming language for right use of the software. This e-Manual provides comprehensive information on ROBOTIS products and applications. -
8
TinyGSM
A small Arduino library for GSM modules, that just works
...Arduino GSM library uses 15868 bytes (49%) of Flash and 1113 bytes (54%) of RAM in a similar scenario. TinyGSM also pulls data gently from the modem (whenever possible), so it can operate on very little RAM. Now, you have more space for your experiments. TCP (HTTP, MQTT, Blynk, ...) All modules support TCP connections. Most modules support multiple simultaneous connections. TCP and SSL connections can usually be mixed up to the total number of possible connections. Many GSM modems, WiFi, and radio modules can be controlled by sending AT commands over Serial. ... -
9
SmartWeld
Weld Optimization for Automatic Welding
Science based weld software to develop optimal automatic weld procedures. SmartWeld is a PC based tool for designers, engineers, and technicians to aid in selecting, optimizing, and configuring automated welding processes. -
Build Securely on AWS with Proven FrameworksMoving to the cloud brings new challenges. How can you manage a larger attack surface while ensuring great network performance? Turn to Fortinet’s Tested Reference Architectures, blueprints for designing and securing cloud environments built by cybersecurity experts. Learn more and explore use cases in this white paper.
-
10
Phobia
Phobia Motor Controller
PMC is an open project that aims to build the quality permanent magnet synchronous machine (PMSM) controller for use in a variety of scopes like RC or electric transport. -
11
ecang
Ethercat analyzer. Pcapng (by wireshark) to cvs files converter.
...Wireshark provides some filters to facilitate data analysis but the high amount of recorded information still makes an analysis complicated for many people who do not have a very deep knowledge of the ethercat protocol and Wireshark tools. Ecang can help these people! Ecang extracts the list of the slaves managed and the PDOs exchanged in an ethercat network directly from the network configuration file (ENI file) .xml, thanks to this data it can read numerous information from the file generated by the sniffer (.pcapng) and transfers them to a comma-separated values file (.csv) already applying a first level of validation. -
12
dockserver-talk
Python module to interface with a Slocum glider dockserver
...The package comes with two applications built on top of dockserverTalk: BUGS: a program to monitor and display the position of gliders (as well as buoys and ships) with respect to a given GPS location (from an external source). Surfalarm: a program that can send text messages or make direct phone calls, acting upon a glider to surface and connect to a dockserver, being in a mission, or aborted. Serial2rudics: a helper program that lets a glider simulator connected to a serial port appear as a glider connecting and disconnection via rudics/iridium when at ther surface or underwater, respectively. -
13
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. ... -
14
Tiny Multi Bootloader+
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
...This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset -
15
nxcEditor
Editor for NXT and BrickPi robot (with simulator for NXT)
With the nxcEditor for Linux NXT and BrickPi robots can be programmed (the source code is highlighted). A NXC-program can be executed either on the real robot or the nxcSimulator, which is integrated in the nxcEditor (the official compiler is invoked from the nxcEditor). A C-program for the BrickPi robot can be programmed either locally on the Raspberry Pi or over a network (using the compiler on the Raspberry Pi). -
16
Introduction-to-Autonomous-Robots
Introduction to Autonomous Robots
...In order to compile a PDF of this book yourself, you either need a working implementation of Latex on your computer or use the online Latex editor overleaf.com. Here, you can either upload a zip file of the source code ("download ZIP" option underneath the green "Code" button on this page), or fork the project into your Github account and import it directly into Overleaf from there. -
17
WiFi Duck
Wireless keystroke injection attack platform
...Never use it to do harm or create damage! A BadUSB pretends to be a keyboard to the computer to send keystrokes. But unlike a human, it can type hundreds of characters per second. By using a simple scripting language, it's easy to make BadUSBs type whatever you want. With the WiFi Duck, you can simply connect via WiFi to manage all scripts from within a web interface. This means that, unlike other BadUSBs, you don't need to install an app, log in, compile or copy scripts to an SD card. -
18
ESP32 BLE Keyboard library
Bluetooth LE Keyboard library for the ESP32
...Compatible with MacOS X (not stable, some people have issues, doesn't work with old devices). Compatible with iOS (not stable, some people have issues, doesn't work with old devices). There is also Bluetooth-specific information that you can set (optional): Instead of BleKeyboard bleKeyboard; you can do BleKeyboard bleKeyboard("Bluetooth Device Name", "Bluetooth Device Manufacturer", 100);. (Max length is 15 characters, anything beyond that will be truncated.) By default the battery level will be set to 100%, the device name will be ESP32 Bluetooth Keyboard and the manufacturer will be Espressif. ... -
19
openPOWERLINK
An Open Source POWERLINK Stack
...A full documentation of the stack is available on the web site: http://openpowerlink.sourceforge.net The following page can be used to report a security vulnerability: https://sourceforge.net/p/openpowerlink/discussion/ -
20
openTCS
open Transportation Control System
openTCS is a platform-independent transportation control system (TCS) intended to manage fleets of automatic guided vehicles (AGVs), but can be used to manage virtually any automatic vehicle. It consists of an abstract kernel that implements replaceable algorithms and strategies (computation of routes, dispatching of orders to vehicles, scheduling of resources etc.), pluggable vehicle drivers that implement communication protocols and a graphical frontend for creating and visualizing logical models of areas the vehicles are moving in. -
21
Robotics Toolbox for MATLAB
Robotics Toolbox for MATLAB
This toolbox brings robotics-specific functionality to MATLAB, exploiting the native capabilities of MATLAB (linear algebra, portability, graphics). The Toolbox uses a very general method of representing the kinematics and dynamics of serial-link manipulators as MATLAB® objects – robot objects can be created by the user for any serial-link manipulator and a number of examples are provided for well-known robots from Kinova, Universal Robotics, Rethink as well as classical robots such as the Puma 560 and the Stanford arm. The toolbox also supports mobile robots with functions for robot motion models (unicycle, bicycle), path planning algorithms (bug, distance transform, D*, PRM), kinodynamic planning (lattice, RRT), localization (EKF, particle filter), map building (EKF) and simultaneous localization and mapping (EKF), and a Simulink model a of non-holonomic vehicle. ... -
22
iqr is a simulation software to graphically design and control large-scale neuronal models. Simulations in iqr can control real-world devices in real-time. iqr can be extended by new neuron, and synapse types, and custom interfaces to hardware.
-
23
ClckBotCreator
Write bots without knowing programming languages
This program was originally conceived as an autoclicker, but soon turned into a program to create bots for Windows. It has 4 commands(mouse clicking, setting cursor position, timer, keyboard clicking) with which you can automate any process. Also, there are a couple of tools in it that will help you comfortably write bots. Version of app is 0.2.1 App run as administrator. Syntax: 1.click: 'left' or 'right' mouse button 2.setc: x - mouse position y - mouse position 3.timer: milliseconds 4.print: C++ code of key (An example of using commands is in the first screenshot) -
24
PyRobot
An Open Source Robotics Research Platform
...It was built to make research repeatable on accessible platforms—most notably low-cost mobile manipulators—while still scaling to richer hardware. The library exposes canonical abstractions (base, arm, gripper, camera, sensors) with calibration and kinematics helpers so beginners can get meaningful results quickly. It also plugs into simulation backends, letting you prototype perception and control algorithms before deploying on physical robots. By standardizing common operations and providing examples, PyRobot reduces boilerplate and encourages best practices in perception-control loops, data collection, and benchmarking. -
25
haikuVM
A Java VM for ARDUINO and other micros using the leJOS runtime.
HaikuVM has been started for hobbyists who develop applications for ARDUINO to open the world of JAVA and leJOS. Yes, you can program an ARDUINO with JAVA! HaikuVM is so small that it even runs on an atmega8 (and the ASURO robot). And yes, you can program an ASURO robot with JAVA! And since version 1.4.0 the RCX lego brick.