Search Results for "c 4 decompiler"
Sort By:
Showing 202 open source projects for "c 4 decompiler"
View related business solutions-
The Vivantio Platform allows you to focus on the IT service management tools that make sense for your organization’s unique service model: from incident, problem and change requests, to service requests, client knowledge and asset management
-
With the world of work changed forever, it’s essential to manage your workplace and assets together to effectively create a high-performing environment. The Eptura experience combines the power of workplace management software with asset management, enabling you to effectively operate your building and facilitate hybrid work.
-
1
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface... -
2
Watchy
An open source E-ink smartwatch
Watchy, an open-source E-Ink smartwatch. Watchy is an E-Paper watch with open-source hardware and software. It has a barebones design utilizing the PCB as the watch body, allowing it to be worn as-is, or further customized with different 3D printed cases and watch straps. It is a unique timepiece that is also a wearable development platform, allowing users to create their own experience. Ultra-low-power e-paper 1.54″ display with 200 x 200 resolution and wide viewing angle. Wi-Fi & Bluetooth... -
3
Tiny Multi Bootloader+
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its... -
4
nxcEditor
Editor for NXT and BrickPi robot (with simulator for NXT)
With the nxcEditor for Linux NXT and BrickPi robots can be programmed (the source code is highlighted). A NXC-program can be executed either on the real robot or the nxcSimulator, which is integrated in the nxcEditor (the official compiler is invoked from the nxcEditor). A C-program for the BrickPi robot can be programmed either locally on the Raspberry Pi or over a network (using the compiler on the Raspberry Pi). The nxcEditor (as well as the nxcSimulator) is designed so that programming... -
WorkforceHub is the instantly useful, delightfully simple to use, small business solution for tracking time, scheduling and hiring. It scales as your business grows while delivering the mission-critical features an organization needs. It is tailored to, built for, and priced for small business employers.
-
5
PLEXIL (plan execution software)
Plan execution language and executive
NOTE: Since 2022 this hosting of PLEXIL is deprecated. PLEXIL has moved to GitHub at https://github.com/plexil-group/plexil. Documentation is found at https://plexil-group.github.io/plexil_docs. Please use these new locations. PLEXIL is a plan execution language and technology developed by NASA and used in automation and autonomy applications at NASA and in the public sector. This software includes compilers for the language, the executive (runtime environment), and related tools.... -
6
RoboDude is a programming tool for AVR microcontrollers. The graphical interface is easy to use, because it works with xhex-files (xml files containing ihex and srec sections, mcu information and fuse bit settings). The GUI uses the avrdude library. The binary files are included in the NiboRoboLib Package!
-
7
EQ Track
Collection of embedded softwares to control a telescope mount.
EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates. -
8
A series of open source files and programs available to use for developing programs to work with the WowWee Robotics RSMedia Robot. These include a USB serial console, a cross-compiler, a firmware dump program, text-to-speech and source code.
-
9
INDI Sharp
INDI C# Client
This project consist in a .NET/Mono assembly containing a simple INDI client and a WinForm that permits to connect to astronomical equipment INDI server, and to use drivers connected at it. -
Chat with your business data with Looker. More than just a modern business intelligence platform, you can turn to Looker for self-service or governed BI, build your own custom applications with trusted metrics, or even bring Looker modeling to your existing BI environment.
-
10
motion5
Specialised variant of GRBL focused on motion of up to five axes
motion 5 is a specialised variant of GRBL which is focused on motion of up to five CNC axes and laser processing instead of milling. It supports ATMega MCUs running with up to 20 MHz and provides jitter-free pulses with a frequency of up to 38 kHz. Wherever usage and handling of motion5 is different to original GRBL, this is described in Wiki. For the G-code commands please note that motion5 supports more axes which are named "A" and "B". So a GRBL-command "G1X10.0Y20.0Z10.0" which moves... -
11
The Player Project: Player is a networked interface to robots and sensors. Stage and Gazebo are Player-friendly multiple-robot simulators. The software aims for POSIX compliance and runs on most UNIX-like OS's. Some parts also work on Windows.
-
12
OSDLab
Open Source Digital Laboratory
Open Source Digital Laboratory compatible with Arduino project. This software consists from C++/Qt programs such as dotScope (https://dotscope.sourceforge.io) - is a scientific shell for live experiment, dlCAM (https://dlcam.sourceforge.io) - computer aided manufacture for Arduino and others projects, img-map (https://img-map.sourceforge.io) - image digitaizer. -
13
iqr is a simulation software to graphically design and control large-scale neuronal models. Simulations in iqr can control real-world devices in real-time. iqr can be extended by new neuron, and synapse types, and custom interfaces to hardware.
-
14
GAAS
Autonomous aviation intelligence software for drones and VTOL
GAAS (Generalized Autonomy Aviation System) is an open source software platform for autonomous drones and VTOLs. GAAS was built to provide a common infrastructure for computer-vision based drone intelligence. In the long term, GAAS aims to accelerate the coming of autonomous VTOLs. Being a BSD-licensed product, GAAS makes it easy for enterprises, researches, and drone enthusiasts to modify the code to suit specific use cases. Our long-term vision is to implement GAAS in autonomous passenger... -
15
ClckBotCreator
Write bots without knowing programming languages
... 4.print: C++ code of key (An example of using commands is in the first screenshot) -
16
Micrometer CNC 4 Raspberry Pi3
A debian image with linux RT kernel, OpenCV345, ROS, and LinuxCNC
This OS is a configured version of Raspbian (debian OS) that focuses on 3D printing, CNC controllers, and CAD/CAM applications. It includes many tweaks to get the GPU acceleration on webGL, VLC and Flash video for example. Since rc2, we now use F2FS for /home to improve sdcard performance. It was load tested on the pi2, pi3, and Pi3B+. It is based on a stripped down MATE desktop, and is intended to be shared along with the documented hardware projects. Please use the GPG key posted on the... -
17
UrgBenri
A useful tool for viewing, recording and replaying URG sensor data.
A useful tool for viewing, recording and replaying URG sensor data. The sensor is made by Hokuyo CO.,LTD. -
18
The Mobility Open Architecture Simulation and Tools (MOAST) framework aids in the development of autonomous robots. It includes an architecture, control modules, interface specs, and data sets and is fully integrated with the USARSim simulation system.
-
19
FactoryController
Floor-level factory/shop automatization control software
Floor-level factory/shop automatization control software. MODBUS realtime network & devices controller. Hi-level task-centric parallel execution scenaries. MRP/ERP integration. -
20
OpenRTDynamics
A framework for implementing real-time control systems
- - - T H I S P R O J E C T M O V E D T O G I T H U B - - - A framework for the implementation of advanced real-time control systems which uses signal/block-based schematics (like Simulink) extended by several features like state machines and online-exchangeable sub-simulations. Besides, this framework properly handles multiple threads, their communication, allows to synchronise control systems to external events (e.g. variable timers or incoming network packages) and provides many... -
21
Robotics Library
C++ framework for robot kinematics, dynamics, motion planning, control
The Robotics Library (RL) is a self-contained C++ library for rigid body kinematics and dynamics, motion planning, and control. It covers spatial vector algebra, multibody systems, hardware abstraction, path planning, collision detection, and visualization. -
22
-
23
Sistema de control y definición de secuencias programadas de movimientos para plataformas robóticas con controlador arduino Dentro del proyecto hay dos códigos fuentes. Uno es un módulo de control para un brazo robótico autónomo que juega al tres en raya y el otro es una plataforma de definición de movimientos programados para robots bípedos Pueden verse ejemplos de ambos en: Control de robots...
-
24
Spark is a physical simulation system. The primary purpose of this system is to provide a *generic* simulator for different kinds of simulations. In these simulations, agents can participate as external processes.
-
25
8 Sounds USB
Summary
XMOS based, USB2 audio card, low power consumption, small form factor, 8 synchronous input channels and 4 stereo output channels.