Search Results for "avr programing software"

GCBASIC is an open-source BASIC compiler for 8 bit Microchip PIC, Atmel AVR legacy, AVRDx and LGT microcontrollers. See https://ko-fi.com/post/The-Story-of-GCBASIC-Making-Microcontroller-Progr-D1D319SJ72 for story of GCBASIC. This is a continuous release project. The latest release is always available. This will give you the most complete development toolchain to create and program 8-bit PIC, AVR and LGT microcontrollers. We have added new capabilities that make GCBASIC the...

motion 5 is a specialised variant of GRBL which is focused on motion of up to five CNC axes and laser processing instead of milling. It supports ATMega MCUs running with up to 20 MHz and provides jitter-free pulses with a frequency of up to 38 kHz. Wherever usage and handling of motion5 is different to original GRBL, this is described in Wiki. For the G-code commands please note that motion5 supports more axes which are named "A" and "B". So a GRBL-command "G1X10.0Y20.0Z10.0" which moves...

This library adds MIDI I/O communications to an Arduino board. MIDI over USB, Bluetooth, IP & AppleMIDI (see Transports). Active Sensing support. Compatible with all Arduino boards (and clones with an AVR processor). Simple and fast way to send and receive every kind of MIDI message (including all System messages, SysEx, Clock, etc..). OMNI input reading (read all channels). Software Thru, with message filtering. Callbacks to handle input messages more easily. Last received message is saved until a new one arrives. Overridable template-based settings. ...

HaikuVM has been started for hobbyists who develop applications for ARDUINO to open the world of JAVA and leJOS. Yes, you can program an ARDUINO with JAVA! HaikuVM is so small that it even runs on an atmega8 (and the ASURO robot). And yes, you can program an ASURO robot with JAVA! And since version 1.4.0 the RCX lego brick.

C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.

This project provides an AVR-based, USB accessible, single-axis motion controller that can fit into an USB-connector completely and therefore is probably the worlds smallest stepper motor controller. Here both, hardware schematics and all software components are provided.

This project comprises two main parts: 1. The classic "Rodney" as described in David L. Heisermann's book "How to build your own self-programming robot", with the original Intel 8085 code. In all likelihood, this is for reference only. I don't expect many people are going to build it 2. An updated version, running on more modern hardware, but remaining true to the algorithms published in his book. The end result will be at least three sets of code, for the Alpha, Beta and Gamma...

C library for robot creators using certain AVR microcontrollers with support for 3rd party hardware boards for various sensors and motor controllers. Comprehensive PDF manual included in the download. Version 2 code stream - requires that projects are created using Project Designer from my web site. If your board isn't listed in Project Designer then look at Board Designer on my web-site to create your own custom board - or if its a commercial board then let me know and, with permission,...

...The simulator does not run native AVR files, but instead a thin wrapper is provided so that the AVR code can be compiled natively. Thanks to this wrapper, and a flexible Lua driver interface, the simulator emulates most of the IO registers, requiring no or minimal code modifications. rp6simul is primarily developed on Linux, but a Windows version will also be released.

The FunnyRobot project designs an educational robot controller that is programmable via USB. Both the hardware and software are configurable and extensible. Users can build programs with a C++ library and run them under a real-time operating system.

Software for simple competition robots. Includes Host (linux) and Microcontroller (AVR) Software. Robust and affordable electronics designs are also included.

wiibot is graphical user interface for programing the UMI RTX robot. The software can be fully controlled with a Nintendo Wii remote.

Control system for Kite Aerial Photography (KAP) based on the Atmel AVR chipset, Xbee radios, and Orangutan-lib for atmega168. Software and Hardware design released under MIT License.

gnome-avrdude is a GNOME graphical user interface (GUI) for the command-line Atmel AVR microcontroller programming software "avrdude" (http://savannah.nongnu.org/projects/avrdude/).

Embedded uC software for a CrazyCar (see crazycar.fhbb.ch). This project generates code for various microcontrollers e.g. 8051, AVR, Fujitsu.

ATM18 is a collection of software modules for the Elektor / CC2 project ATM18. The ATM18 project is a controller board based on a Atmel AVR ATmega88 controller. Sourcecode are available for Codevision AVR, AVR-GCC and BASCOM.

This Project contains the software for the various AVR-Microcontroller-Boards for a modular, autonomous hexapod (see: www.ni-c.de/hal0). Source-Code is written with Eclipse in C. The used compiler is the open source AVR-GCC for AVR microcontrollers (ATTi