Search Results for "atmega128"

AVR128DA /Atmega128 microcontroller based open source EID smartcard with RSA (512-2048) and ECC (prime192v1, prime256v1, secp384r1, secp521r1 and secp256k1) support. Compatible with MyEID card from Aventra. Supported in windows and linux by opensc package. Allow about 64KiB space for keys/certificates. PKCS#15 structure supported. USB token with CCID interface based on xmega128a4u with same features as card.

STAVL-05, It is a firmware for Automatic Vehicle Location (AVL) initially compatible with AVL-02 , AVL-03 , AVL-05 devices. STAVL-05 send binary frames to the server, for reduce the tcp/udp traffic.

Контроллер впрыска для мотоцикла Днепр на базе процессора ATMega2560. Разработка кода в CodeVisionAVR. Дальнейшая поддержка изначального кода под ATMega128 прекращена.

library for atmega128 and atmega328p

Remote industrial terminal indicator to the control of Modbus-RTU on Atmega128. Publication of "MODBUS on a leash. Remote industrial indicator. - Radiolybitel, Minsk, 2009, № 7, p.46" (series of articles http://radioliga.com). Project for IAR.

C library for robot creators using certain AVR microcontrollers with support for 3rd party hardware boards for various sensors and motor controllers. Comprehensive PDF manual included in the download. Version 2 code stream - requires that projects are created using Project Designer from my web site. If your board isn't listed in Project Designer then look at Board Designer on my web-site to create your own custom board - or if its a commercial board then let me know and, with permission,...

...The code is compiled for the ATmega328p so the supported boards should be: - Arduino Uno - Arduino Duemilanove - Arduino Diecimila - Arduino NG - Arduino Extreme v2 - Arduino Extreme Note: only tested on Arduino Duemilanove No schematics are available yet, but please have a look at the MegasquirtAVR schematics. It is meant for the ATmega128 so not pin compatible.

The FunnyRobot project designs an educational robot controller that is programmable via USB. Both the hardware and software are configurable and extensible. Users can build programs with a C++ library and run them under a real-time operating system.

This is a fancy bootloader for devices with Atmel's AVR 8Bit architecture. It shall update the controllers firmware by reading a fresh one from SD-Card. It is based on code published at http://www.mikrocontroller.net/articles/AVR_FAT32 .

Atmel AVR Operating System initially designed for the Atmega128. Supports multiple concurrent processes and simple message passing. Basic system call implementation available.

Media Lab Asia collaborated with IIT Delhi for development real-time kernel O/S named “RTKER OS” portable on microprocessor based systems and a Multithreaded O/S for 8-bit microcontrollers (like 8051 and ATMega128) as low cost embedded solution.

A cross-platform simulator for embedded systems, with a plug-in architecture for adding microcontrollers and other devices. Written in C for maximum compatibilty and speed. Currently has support for AVR AT90S8515 and ATmega128.

Juicebox is a design (code and hardware) for a small ATMEGA128 system which can be used for mp3 playback and general tasks. It includes MMC card and FAT filesystem support and is written for GNU tools.

Aim of the project is to build a audio-mux hard and software. the hardware is based on an atmega128 risc processor. it has 16 stereo input channels and 2 stereo output channels.