Search Results for "media"

...The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments.

Modern rotational hard disks have a misfeature involving the regular automatic unloading of the heads, measurable by the SMART attribute "Load_Cycle_Count", that causes latency on wake-up, and while the manufacturers sell this as "green", it is believed to cause reduced hard disk life. The parkverbot daemon will periodically issue small read requests in order to keep the hardware from going to its head-unloaded idle state.

Driver for the built-in vfd display on the Acer Idea 500 media center.

...enables you to use your LEARNING remote control to control any system that you can plug a USB keyboard into (Windows, Linux, Mac). Great for controlling a home theatre system such as MythTV, XBMC or Media Center. No drivers are required. You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on your infrared remote control and when you press that button IRK! will send the corresponding USB keystroke to the host computer. You can program *any* USB Consumer Device control code too...for example, Play, Pause, Mute, Volume up, Volume down, and many others.

Growlight facilitates management of all storage devices known to the Linux kernel, from hardware RAIDs to hybrid media to ramdisks to ZFS (indeed, Growlight was initially written to simplify ZFS on Linux). It understands the majority of partition and filesystem types, as well as both software and hardware RAID, LVM, and encrypted disks.

Testcard is a SDL/SDL_gfx based monitor test pattern (test card) generator. SMPTE and other test patterns are supported. Future plans include a very basic scripting capability to construct custom test patterns from built in primitives.

Firmware and schematic for a USB HID compatible remote control consumer device using an Atmel AVR Atmega8. No drivers are needed for WindowsXP / WMP10 / Vista / Windows 7. Press Play/Stop/Pause and control media player directly from your remote control.

This project is an attempt to provide the Linux community with kernel drivers for two hugely popular DVD playback cards namely DXR3 from Creative Labs and Hollywood Plus from Sigma Designs.

These tools are used to view information about, and to control, Media Changer devices such as Tape and DVD/CD libraries.

This code programmed into an AVR microcontroller wired to the receiver's JTAG port allows loading unsigned code on SMP8634 based media receivers enabling you to boot other operating systems e.g. Linux. (Only x30Xt receivers are currently supported)

Media Lab Asia collaborated with IIT Delhi for development real-time kernel O/S named “RTKER OS” portable on microprocessor based systems and a Multithreaded O/S for 8-bit microcontrollers (like 8051 and ATMega128) as low cost embedded solution.

This is the development site for frame buffer video drivers and video subsystem for Linux.

An OS independent implementation of the famous tool for custom LCD control - LCDHype. The program enables for complex and fully customizable screen control through easy to use scripting langauge similar to Pascal.

A utility for converting raw evdev events into other commands (not just keypresses). Useful for multimedia mice and keyboards, joysticks, remote controls and more.

See https://github.com/torvalds/linux/tree/master/drivers/media/pci/ivtv and https://www.linuxtv.org/wiki/index.php/Ivtv Old sites were http://ivtvdriver.org/ and http://ivtv.writeme.ch/ Old description: The primary goal of this project is to provide an Open Source driver for the Hauppauge 250/350 series of MPEG video capture cards and other cards based on the iCompression iTVC15.

This project aims to replace the multimedia server application for the Gateway, GoVideo, and NetGear DVD players & set-top devices. The new server software aims to be more organized and support a wider variety of formats than Digital 5's original.

Software for Crystalfontz CFA-631 USB LCD display

Library to handle drawing on cheap 84x48 LCD (PCD8544 controller) used in some Nokia mobile phones (for ex. 3310, 3330, 3210) via LPT port. Contains some demostration software. May be used in various applications: pc modding, system monitoring etc.

Submount is a new attempt to solve the removable media problem for Linux. Its purpose is to automatically mount and unmount cd, floppy, and other removable media drives while remaining entirely invisible to the user.

OpenVault is middleware that helps applications manage removable media. In a Storage Area Network (SAN), it arbitrates access by applications to removable media drives. It is the basis for the IEEE 1244 standard: Media Management System.

A collection of tools (framebuffer driver, tv out, directfb driver) for console framebuffer graphics on VIA's EPIA mini-ITX motherboard.

Remote control for Creative Live! Drive's RM900. This will allow anyone to control a bunch of multi-media *nix apps from remote control, bundled with some SB Live! and Audigy sound cards.

This is a frame buffer driver for linux kernel 2.2.x and 2.4.x for 3dfx's 1st an 2nd generation of "3D only" graphic boards, namely the voodoo graphics, aka SST and the voodoo2, aka CVG. Please take a look at the CVS, as the tarballs are often outdated