Open Source C# Hardware Platforms - Page 2

ASCOM driver for the LittleFoot Elegance Photo (LFEP) telescope controller. Firmware 6.x is fully supported - firmware 5.x is partially supported (all LFEP features are available but configuration is only possible by handbox). Contains drivers for telescope, focuser, camera, filter wheel, roof controller and dew heater which shares a single connection to the controller.

GUI wrapper for escputil (command line utility to manage Epson printers): it allows to watch ink levels, clean print heads, print nozzle patterns, align printer heads, .... with a simple and friendly user interface.

OpenSandra.NET is a WMI application designed to scan and report hardware information e.g Motherboard,CPU,Network and installed software . Built along the lines of Sisoft Sandra and Fresh Diagnose it will also support benchmarking. REQUIRES .NET FRAMEWORK

Provides a system tray icon displaying a Windows XP's system's battery status.

Windows-Fetch A neofetch conversion on .NET. Windows Fetch works fine in windows xp, vista, 7, 8, 8.1 and 10. Requirements * .NET >= 4.0 * Windows xp & later How to configure If you want configure windows fetch go here https://github.com/MRmlik12/Windows-Fetch/wiki/How-to-configure-Windows-Fetch Github: https://github.com/MRmlik12/Windows-Fetch Changes 1.3.1: - changed CLR version to .NET version 2019 MRmlik12

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

Windows disk image reading and writing software. This application is intended for use as a reader/writer for small flash drives. It is compatible with raw and gzipped disk images, including those used by m0n0wall.

Mouse Free is a windows application that helps you to use your mouse freely. Also It increases uses of mouse fastly. For example if you move your mouse to right, after the end point of screen the mouse start from the beginning.

Sysinfo is a comprehensive tool that provides detailed information about different sectors of your Windows machine. Once you open Sysinfo, it scans your machine and compiles different system information details. You can view information related to your processor, bios, operating system, hard drive, memory usage, optical drives, network adapters and more. Each of the sections provides some at-a-glance general information, but for each, the sector can be expanded allowing for a more in-depth look. Sysinfo also includes a section for battery details making it useful even for laptop users. In closing, Sysinfo is a truly easy to use resource for those that like to keep informed about all aspects of their machine. Thanks to MajorGeeks for this awesome description ;)

Sysinfo is a simple GNU/Linux program which displays some computer/system information.

DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code

Monitoring for your hardware components - CPU - GPU - RAM - Drives - Network - Fans Various customization options, such as - display the app as an app bar (Windows) - autostart after you initially logged in (Windows) - docking location[s] on different screens - adjust application font size & width - tailor update interval to your needs - various color options for you to modify - enable or disable specific monitors, hardware or sensors - and more ! S.M.A.R.T. data of your drives You can show various S.M.A.R.T. attributes of your drives, such as health, temperature, power-on hours and more, by simply clicking on the drives name in the drives monitor. Please check out Github for more details and up-to-date new releases / versions ! https://github.com/Blacktempel/LibreDiagnostics For Linux users: you currently have to build the binaries by yourself and functionality may be limited. There are plans to improve this in future, but not on high priority.

Sample code demonstrating how to use OmniDriver to drive Ocean Optics full range of spectrometers from C, C++, C#, Java, LabVIEW, Delphi, MATLAB and more.

This library encapsulates the communication protocol of the Sprut-usb4all. Supporting the of MCD and CDC firmware.

A Vista driver for the DX1 pad written (nearly) entirely in C#. The project is based on libusb (Win32) and SharpUSBLib.

To develop an Arduino Nano based GPS module that is low cost, portable and can be used in Astronomy. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author.

This is a C# library dedicated for using with a www.canusb.com device Full notes: See ReadMe.txt Summary The LAWICEL DLL is 'unmanaged code' and was not designed for use by C#/VB/Mono http://en.wikipedia.org/wiki/Managed_code If you wish to call 'unmanaged code' from 'managed code', you need to use a 'C# wrapper' to access the DLL. This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY UNNECESSARY. Why not have the DLL as managed code?? Why not simply reference the library in your project and just call its functions?? This project does just that Licence: LGPLV3.: In summary, the only thing we ask is if you improve / bugfix / extend the library then feed these changes back into the project by emailing jon_newcomb or requesting sourceforge access. Applications you develop that use this library are not covered by this licence and can remain closed source and commercial

8088 Software Development Environment for the .NET & WIN32 platform. Program and control the windows pc with 8088 ML. Assemble, Disassemble, Emulate 8088 Assembler. Realtime I/O

Using the new C# Dll from swig portability of Openobex/ObexFtp to write a nice GUI able to transfer file between two devices with obex protocol. More Info’s here: http://cs-obexftp.wiki.sourceforge.net/

This is very simple application for data register out control with C#. When I interested control external electronical device I was looking such as application but I couldn’t find any working properly and I wrote it. This article is about controlling data registers of parallel port (LPT port) with C#.net 2.0 and using inpout32.dll/inpout32.lib out32 function. http://blog.armanasci.com/ http://blog.armanasci.com/contact-me/

Uart32 is a C++ wrapper around the win32 Serial Port API that allows blocking-mode access to the COM port. This library works great for accessing a UART serial port from a background worker thread. It features: a simple c++ class. (temporarily removed for maintainance. Use DLL API Instead) built in per access timeout on data receive. a C-API wrapper that is exportable to C# DLL import class

iPod Control facilitates using your iPod on multiple computers, by keeping the iPod's preferences local to a guest (Windows) computer -- preventing the annoying "Overwrite Library?" dialog and exposing additional functionality.

microTone Module is analog interface to connect microcontrollers or digital logic systems with PCs. This interface use PC sound card’s audio output terminal to send commands to external hardware systems.

SerialPortNet is an open source serial port communication library for Microsoft .NET. It's written in c#, implements complete .NET 2.0 specifications, and is designed to allow for multiple OSes and add-on 3rd party Serial to Network adapters.

8051lib is a collection of easy-to-use C Functions and Assemble Languages Sets for the 8051 microcontroller. The Final Goal is to make the microcontroller developer focus on the Algorithms not the Hardware Drivers.