Open Source C# Hardware Platforms - Page 3

8088 Software Development Environment for the .NET & WIN32 platform. Program and control the windows pc with 8088 ML. Assemble, Disassemble, Emulate 8088 Assembler. Realtime I/O

A modular program that runs in background, and executes actions based on conditions. You can use it i.e. to make your computer switch between over/underclocking profiles by checking if a 3D application is running. Written in C# and winforms (.NET 2.0).

Niniejszy system ma za zadanie ułatwienie funkcjonowania serwisu komputerowego poprzez udostępnienie niezbędnych do tego funkcjonalności. System dzieli się na trzy główne elementy: bazę danych, aplikację desktopową oraz stronę sieci web.

bcon sends commands for remote-control via the serial port of your computer. It is a command-line based tool - so you can bind it to macros and other applications.

Brahma is an open-source library written for the .NET 3.5 framework (in C# 3.0), to provide high-level access to parallel streaming computations on a variety of processors, including GPUs.

Toolkit (.NET/Mono) + GUI (GTK#) to administer and control a Conexant Encore ADSL Modem. Its modular design allows to be extended to support other brands/models.

Software for Crystalfontz CFA-631 USB LCD display

Using the new C# Dll from swig portability of Openobex/ObexFtp to write a nice GUI able to transfer file between two devices with obex protocol. More Info’s here: http://cs-obexftp.wiki.sourceforge.net/

Esta Herramienta de Respaldo y Restauración de Controladores le permite hacer un respaldo de sus controladores y restaurarlos facilmente | This Driver Backup and Restore Tool allows you to backup your drivers and restore them easily

A Vista driver for the DX1 pad written (nearly) entirely in C#. The project is based on libusb (Win32) and SharpUSBLib.

This is a .net wrapper to access the digital-enlightenment DMX Interface. You can find all information related to digital enlightenment on http://www.digital-enlightenment.de (german page) To run the application, you have to get the usbdmx.dll from the digital enlightenment website (http://www.digital-enlightenment.de/usbdmx.htm). The dll is part of the project archive linked at the bottom. You also need nlog for the library to compile. The project is configured with nuget to make it easier to get the required packages.

The goal of this project is to build a centralized domotic system. This project contents three parts: - An electronic part; - An embedded software part (PIC Microship controller); - A PC software part (Dotnet/Mono)

This software aims to simplify user's life, by looking for new drivers (all at once), notifying the user if upgrades are available, and driving them directly here, at home (according to user's will).

Driver Logger is an Open Source port analyser. The program is designed to monitor in/out traffic on a variety of bus ports such as USB, Parallel and Serial. The program logs the traffic and can also open, list, categorize and search through the logs.

FTDI Driver dll in C# for use in C#. This driver is for the FT232, FT245, chips and does importing of dll functions with pinvoke.

Windows disk image reading and writing software. This application is intended for use as a reader/writer for small flash drives. It is compatible with raw and gzipped disk images, including those used by m0n0wall.

FoxController is a cross-platform application wich allows to control etherogeneous devices through a general pupose web service interface. FoxController uses a plug-in architecture in order to implement the low level communication with the devices

G-Workstation is an application for the Logitech G series written in C#. You can write you own small G15/G19 Applets with the scriptlanguage Lua.

GoGetHardware (GGH) is a tool to show up the mounted hardware on a windows pc. GGH gets information about the system OS, the drivers and the hardware using MS WMI. Even like Everest Home Edition. GGH creates reports, to send these information to friends

GLight is an opensource library for Logitech's G-Series, written in C# using .NET 2.0.

This project uses massively parallel Graphics Processing Units(GPU) for neural network(Backpropagation) purposes.

Sysinfo is a comprehensive tool that provides detailed information about different sectors of your Windows machine. Once you open Sysinfo, it scans your machine and compiles different system information details. You can view information related to your processor, bios, operating system, hard drive, memory usage, optical drives, network adapters and more. Each of the sections provides some at-a-glance general information, but for each, the sector can be expanded allowing for a more in-depth look. Sysinfo also includes a section for battery details making it useful even for laptop users. In closing, Sysinfo is a truly easy to use resource for those that like to keep informed about all aspects of their machine. Thanks to MajorGeeks for this awesome description ;)