Search Results for "yaffs2-source"
Sort By:
Showing 175 open source projects for "yaffs2-source"
View related business solutions-
Out-of-the-box scripts. Around-the-clock monitoring. Unmatched automation capabilities. Start doing more with less and exceed service delivery expectations.
-
Define and Deliver Comprehensive Cybersecurity Services. Security threats continue to grow, and your clients are most likely at risk. Small- to medium-sized businesses (SMBs) are targeted by 64% of all cyberattacks, and 62% of them admit lacking in-house expertise to deal with security issues. Now technology solution providers (TSPs) are a prime target. Enter ConnectWise Cybersecurity Management (formerly ConnectWise Fortify) — the advanced cybersecurity solution you need to deliver the managed detection and response protection your clients require. Whether you’re talking to prospects or clients, we provide you with the right insights and data to support your cybersecurity conversation. From client-facing reports to technical guidance, we reduce the noise by guiding you through what’s really needed to demonstrate the value of enhanced strategy.
-
1
OpenOCD - Open On-Chip Debugger
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets. -
2
Arduino ASCOM Focuser Pro2 DIY
Version 2 of the myFocuser Project
myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 286,500+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - ... -
3
Open Programmer
An USB programmer for PIC, dsPIC, AVR, serial memories
An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms -
4
Win NT/2K/XP, and Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4li
-
Built for growing businesses and well-established enterprises alike, Multiview is a highly scalable and robust ERP.
-
5
QuickMAN is a Mandelbrot fractal generator with multicore support. ASM-optimized code can reach over 100 billion iterations per second. Features an easy-to-use GUI, realtime pan/zoom, multiple palettes, image logging, and saving in PNG format.
-
6
ttf-gdos
TTF-GDOS is an Atari GDOS replacement that uses true type fonts
TTF-GDOS is a GDOS replacement that uses true type fonts as well as gem fonts. It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big... -
7
SwiftDriver
CMD SwiftLink RS232 Kernal Wedge for C64/128
Allows a SwiftLink compatible bus-ACIA to be accessed through standard C64 kernal calls. The download includes binary at 49152, and source in two formats so you can relocate it. -
8
A new 64-bit RISC platform, complemented by a set of development tools, standards specifications and synthesizable VHDL implementations.
-
9
EQ Track
Collection of embedded softwares to control a telescope mount.
EQ Track purpose is to provide amateur telescope makers (ATM) with electronic board schematics and embedded software to control their telescope mount via stepping motors. EQ Track comes in different "flavors" : - "Basic" controls the right ascension and declination motors of an equatorial mount. - "Go To" controls the motors of a mount in any orientation (ie. equatorial, altazimuth, alt-alt), to point and track equatorial coordinates. -
Simplify every aspect of buying for your business in Order.co. From sourcing products to scaling purchasing across locations to automating your AP and approvals workstreams, Order.co is the platform of choice for growing businesses.
-
10
GXSM
Scanning Probe Microscopy Controller and Data Visualization Software
... a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. All latest software is available via SVN only or Live Demo/Install CD: http://www.ventiotec.de/linux/GXSM-Linux.iso -
11
SulinOS
Indipendent distro uses inary package system. Sulin is roolling donkey
Sulin is rolling donkey Gitlab: https://gitlab.com/sulinos Github: https://github.com/sulinos Telegram: https://t.me/sulinos powered by donkey team -
12
Specialist-S
8-bit home-made computer on Z80 CPU
This is a renaissance of the "Specialist" micro-computer published in the popular "Modelist-Constructor" magazine issue #2, 1987 by A. Volkov. The original design was used the Soviet i8080A analog - KR580IK80A (KR580VM80A), but this one is based on the Z80A CPU. Postfix "S" in the project name designates a "simple" design. -
13
Firmware for a power supply with an ATMega32 uC. The hardware is based on the DCG of the ctlab project from the german magazine c't.
-
14
zxmmcfid
A ZXMMC mass storage device FID driver for CP/M
... well. For list of limitations, build instructions and more details see the source code file. -
15
MSX Disk Interface Emulator
A Interface to adapt modern SD Card to the old MSX computers
This is an open source project that aims to create a MSX cartridge that acts as a old disk drive interface but in fact it will be accesing a modern SD Card. For the MSX it will be as if there is a magnetic disk drive with a real magnetic disk but for real it will be accessing a .dsk file inside a sdcard. Development tools used are: - Kicad version 2013-07-07 - Microchip XC8 v1.21 (free mode) - Micrchip MPLAB X IDE v1.90 - Altera´s Quartus Web Edition 11.0 UPDATE 2014-11-05... -
16
CuteMouse is a DOS based mouse driver, fully written in assembly language. It's optimized for size (and speed) to allocate as small as possible amount of your precious 640KB RAM. It currently supports serial and PS/2 mice and, if BIOS support present an
-
17
Development of software emulator for BESM-6, old soviet mainframe. This project has been split and moved to: https://github.com/besm6/simh - BESM-6 simulator https://github.com/besm6/dispak - DISPAK simulator https://github.com/besm6/besm6-archive - disk images https://besm6.github.io/ - examples, DISPAK sources and KRAB sources
-
18
XFreq
a UNIX GUI to monitor Core i7 & Core 2 processors
XFreq provides a GUI to monitor the Processor frequencies (including Turbo Boost), the temperatures, C-States; and to alter the operational features of the Intel Core i7 processor. XFreq is also programmed for Core 2 and other Intel 64-bits architectures. -
19
JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.
-
20
HimemX
The ultimate DOS XMS memory manager
This is HimemX - the open-source XMS memory manager of FreeDOS. Uses unreal mode when possible and has a very low conventional memory footprint. Got any patches? Noticed any bugs? Please report your findings on the FreeDOS mailing list: freedos-user@lists.sourceforge.net -
21
QNICE is a simple 16 bit processor intended to teach the basics of hardware design as well as operating system design. A TTL implementation is planned, a FPGA implementation is available here: http://qnice-fpga.com. Currently there exists a C based simulator and an assembler.
-
22
Firmware for Cypress' EZ-USB (AN2131) device that lets you use keyboards, mice etc. as USB compliant Human Interface Devices.
-
23
cMIPS
cMIPS - an FPGA ready VHDL model for 5-stage pipeline, MIPS32r2 core
This project was moved to https://gitlab.c3sl.ufpr.br/roberto/cmips The code here is no longer up to date. The VHDL model mimics the pipeline design described in Patterson & Hennessy's book (Computer Organisation and Design) and is an almost complete implementation of the MIPS32r2 instruction set. The TLB and assorted control registers will be included soon (as of fev 2015). The model was synthesized for an Altera EP4CE30F23. The model uses up 15% of combinational blocks and 5%... -
24
Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]
-
25
CaChars
Graphics mode console I/O for the TRS-80 Color Computer
This is an add-on for the CoCo Extended Color BASIC that implements 51x24 and 64x24 text screens. All operation of the BASIC interpreter works naturally. It is developed in 6809 assembly language. It may be assembled with LWTOOLS (http://lwtools.projects.l-w.ca) under Linux, or with Windows cross-assemblers such as Chet Simpson's CASM which is included in RainbowIDE. In order to build a disk image, you will also need the Toolshed utility suite....