Search Results for "software test tool"
Sort By:
Showing 61 open source projects for "software test tool"
View related business solutions-
Over two-thirds of people reuse passwords across sites, resulting in an increasingly insecure e-commerce ecosystem. Learn how passwordless can not only mitigate these issues but make the authentication experience delightful. Implement Auth0 in any application in just five minutes
-
Your applications are all built differently, but they all need to perform. NeoLoad simplifies and scales performance testing for everything, from APIs and microservices, to end-to-end application testing through innovative protocol and browser-based capabilities.
-
1
Mos
A lightweight tool used to smooth scrolling and set scroll direction
A lightweight tool used to smooth scrolling and set scroll direction independently for your mouse on MacOS. Mos separates the touchpad and mouse scrolls independently, then, you can set the direction of the touchpad and mouse wheel separately. Also, Mos provides smooth scrolling for your mouse, whether you are a Windows user or a MacOS, you can move freely. Mos's special interpolation algorithm can make every mouse roll as smooth and silky as possible. Mos can independently manage the scrolling... -
2
RIDE
Test data editor for Robot Framework
RIDE is a development environment for Robot Framework test cases. Robot Framework is a generic test automation framework for acceptance testing and acceptance test-driven development. -
3
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. Simplify your workspace by combining multiple computers into one. Easily copy and paste between computers with no effort at all... -
4
Particle Firmware for the Electron, P1
Device OS (Firmware) for particle devices
The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle... -
PMG is a low-code software platform that allows users to configure automation solutions and business applications to drive digital transformation initiatives. From streamlining business processes through automation, to integrating existing systems and filling in point solution functionality gaps, to delivering a collaborative workspace and unified user experience – PMG’s low-code platform does it all without coding. Business users as well as IT resources are empowered to configure, deploy, and maintain solutions that meet their company’s specific needs.
-
5
IPMI Management Utilities
Manage and interpret IPMI systems with common a software tool
ipmiutil is an easy to use set of IPMI server management utilities. It can get/set sensor readings & thresholds, automate SEL management, do SOL console, etc. Supports Linux, Windows, BSD, Solaris, MacOSX. The only IPMI project tool that runs natively on Windows. See ipmiutil.sf.net for rpms, etc. (formerly called panicsel). It can run driverless in Linux for use on boot media or embedded environments. -
6
GeigerLog
Python program for Geiger counters and Environmental Sensors
GeigerLog is a combination of data logger, presenter, and analyzer, and now released as version 1.5.0 ! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. Supports HiDPI screens. GeigerLog is WiFi enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support GQ Electronic's GMC... -
7
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 117,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
8
This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.
-
9
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing... -
BrightGauge, a ConnectWise solution, was started in 2011 to fill a missing need in the small-to-medium IT Services industry: a better way to manage data and provide the value of work to clients. BrightGauge Software allows you to display all of your important business metrics in one place through the use of gauges, dashboards, and client reports. Used by more than 1,800 companies worldwide, BrightGauge integrates with popular business solutions on the market, like ConnectWise, Continuum, Webroot, QuickBooks, Datto, IT Glue, Zendesk, Harvest, Smileback, and so many more. Dig deeper into your data by adding, subtracting, multiplying, and dividing one metric against another. BrightGauge automatically computes these formulas for you. Want to show your prospects how quick you are to respond to tickets? Show off your data with embeddable gauges on public sites.
-
10
CommBusTerm
"CommBusTerm"
"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface. The project "kmicommbusmediator" provides connectivity for the "Raspberry Pi" to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Link to the project "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ Application software for CommBusTerm: * "cbmedimonitor" (see "kmicommbusmediator") * "WaveProgEdit... -
11
kmicommbusmediator
"KMI Comm. Bus Mediator"
"KMI Comm. Bus Mediator" ("kmicommbusmediator") The project "kmicommbusmediator" provides connectivity for the "Raspberry Pi 4 Model B" and "Raspberry Pi 5" to the "PPG Communication Bus" which is used by PPG devices such as the "Wave 2.2", "Wave 2.3", "EVU", "PRK", "Waveterm A", "Waveterm B". "kmicommbusmediator" contains hardware and software components: * "kmicommbusmediator-HW": "Comm. Bus" hardware-interface * "CBMEDIBIOS": firmware for "kmicommbusmediator-HW" * "cbmedimonitor": command... -
12
WiFi Duck
Wireless keystroke injection attack platform
A user-friendly open-source project to learn about keystroke injection attacks or ‘BadUSBs’. By emulating a USB keyboard, BadUSBs can gain full access to a computer in a matter of seconds! Unlike with other BadUSBs, you don’t need to install an app, log in, compile, or copy scripts onto an SD card. You simply connect via WiFi to manage all your scripts from within the web interface. This tool is intended to be used for testing, training, and educational purposes only. Never use it to do harm... -
13
Core Adjust
Adjust various settings of Intel Processors.
Core Adjust is a software tool that can be used to adjust various settings of 4th generation (Haswell) and later Intel(tm) processors on Debian/GNU and other Linux systems. -
14
GTK PPP
GTK front-end to wvDial, a modem/ISDN dial-up software
GTK PPP is an easy to use graphical dialup connection configuring and dialing tool with system tray icon support. It uses GTK+ for its graphical interface and integrates well in GNOME desktop environment. It also uses WvDial dialer as its backend, providing simple configuration via config files. You can also use plain wvdial if you don't have X running. GTK PPP is GTK3 fork of GNOME PPP. -
15
GrecTech SysInfo
System Information Tool for Windows
Sysinfo is a comprehensive tool that provides detailed information about different sectors of your Windows machine. Once you open Sysinfo, it scans your machine and compiles different system information details. You can view information related to your processor, bios, operating system, hard drive, memory usage, optical drives, network adapters and more. Each of the sections provides some at-a-glance general information, but for each, the sector can be expanded allowing for a more in-depth... -
16
PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).
-
17
Ink is a command line tool which displays the ink level of your printer. It makes use of libinklevel.
-
18
liblabpro
Open-source access to Vernier LabPro devices
liblabpro is a cross-platform C library for controlling and collecting data from Vernier LabPro devices. It is currently in an early work-in-progress stage and is not affiliated with Vernier in any way. As a test case, it also includes a basic program, labpro-console, for communicating with a LabPro using its plaintext command system. -
19
C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.
-
20
xpd-ebike
Infineon e-bike controller setup tool
XPD (stands for "eXtended Parameter Designer") is an alternative to "KeyWin e-Bike Lab Parameter Designer" software used to program the so-called "Infineon" e-bike controllers. * It provides some additional features missing in the original program, and is generally easier to use. * It is opensource so you can learn how it works and add unique features to it or customize to suit your own needs. * It is cross-platform: works on Linux, Windows and Android. -
21
pyhard2, control hardware from python
An object-oriented framework for the development of instrument drivers
pyhard2 is an object-oriented framework to help in the development of instrument drivers. pyhard2 is proposed as an alternative to LabVIEW. Emphasis is given on serial drivers but the framework can be used with any socket. The source also contains the implementation of a PID controller and a setpoint ramp generator. The instrument drivers may further be incorporated in a GUI, using, e.g. PyQt or PySide. Threading is automatically taken care of. Furthermore, generic GUI (called controllers)... -
22
STM32 USART Bootloader
USART Bootloader for STM32 Family devices
Small universal tool for handling USART STM32 bootloader. Works with all STM32 family devices (also with newest STM32F4 and STM32F0). Dedicated especially for Linux users. Works in shell. There are plans to make a GUI overlay. -
23
MatlabSimulink2CPP
Demo of Simulink to C++ C or HDL FGA for HFT potential
Video and files download for Visual trading idea to C++ or FPGA HFT Meetup File download sample: test model (Matlab 2014b with Visual Studio 2013 C++ project generated) Powerpoint MATLAB SIMULINK http://quantlabs.net/blog/2015/04/video-and-files-download-for-visual-trading-idea-to-c-or-fpga-hft-meetup/ -
24
stakka_klm
Kernel module to manage Disc Stakka Units
Kernel Loadable Module to interface with the Disc Stakka units. Other devices to be implemented if/when I can get my hands on them. Objective is to separate the user application from the tedious management of the device (eg. constant polling to prevent their reset function, USB interaction requirements). A /dev device is created per chain through which applications can read/write status and commands. A command-line tool is included to assist with testing and to illustrate the /dev interface... -
25
LightMap
This software + hardware is designed to map lighting intensity.
This software + hardware is designed to map lighting intensity in a serie of successive locations. It uses a light dependent resistor to sense light level that was designed to measure light uniformity in an indoor seedling rack and can be useful for lighting devices designers, stage lighting, etc ...