Search Results for "ram"
Sort By:
Showing 21 open source projects for "ram"
View related business solutions-
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
1
Lenovo Legion Linux Support
Driver and tools for controlling Lenovo Legion laptops in Linux
Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC). -
2
kmiwaveram
"KMI Wave-RAM"
"KMI Wave-RAM" ("kmiwaveram") "kmiwaveram" contains a "Wave-RAM" of 8 banks of 16K sample words of 16bit each, which can possibly be used in a PPG synthesizer such as the "Wave 2.2", "Wave 2.3", or "EVU". For sample-transfer, "kmiwaveram" has a USB interface and an optional "PPG Communication Bus" interface. On a "CommBusTerm" system, the tools "cbmedimonitor" and "WaveProgEdit" can be used for "fast" sample-transfer to "kmiwaveram" via USB. -
3
LibreDiagnostics
A desktop utility for real-time hardware monitoring and diagnostics.
Monitoring for your hardware components - CPU - GPU - RAM - Drives - Network - Fans Various customization options, such as - display the app as an app bar (Windows) - autostart after you initially logged in (Windows) - docking location[s] on different screens - adjust application font size & width - tailor update interval to your needs - various color options for you to modify - enable or disable specific monitors, hardware or sensors - and more ! -
4
LinuxHardware Info
Hardware Info for Linux portable AppImage + Benchmark
LinuxHardware Info (portable/AppImage) -------------------------------------- Ihr wollt wissen was in Eurem Rechner steckt? Genau das könnt Ihr mit LinuxHardwareInfo, ohne jedes mal die Konsole zu bemühen. Kurz-Info: - Hardware Analyse - einfache Benchmarks (CPU / Grafik/RAM und HDD) - HDD/USB Fake Erkennung - Live Sensoren - Portable AppImage (einfach vom USB-Stick in Live-Image kopieren) - automatsichen Update Erkennung ab v1.2 - Darkmode - und anderes - im Support-Forum gibt es alle Infos -
Full-stack observability with actually useful AI | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
5
Argus Fan Monitor
Control fan speed and monitor the temperature of system components.
...With multi-controller support, fan profiles, hysteresis, and temperature averaging, Argus Monitor offers smooth, precise fan adjustments with minimal noise fluctuation. The software also includes robust temperature monitoring for CPUs, GPUs, SSDs, RAM, and additional sensor channels. For supported devices, it provides RGB control as well as gadget and tray-icon displays for quick system insights. Lightweight, stable, privacy-respecting, and fully customizable, Argus Monitor is one of the most comprehensive PC cooling and monitoring solutions available. -
6
CommBusTerm
"CommBusTerm"
"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor * "WaveBackup" backups * "waveaddsynth" for additive synthesis * "wavetransientutil" for transient sounds Copyright (C) 2022-2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. See disclaimers below and within the distribution. ... -
7
spectramfid
A ramdisk on a Spectranet device FID driver for CP/M Plus
CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps). Unfortunately, motor state is controlled by the same hardware register as +3's memory paging features! ... -
8
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
...High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. An interrupt pin is not required. Any Arduino IDE >= 1.0.0 should be fine. ... -
9
CuteMouse is a DOS based mouse driver, fully written in assembly language. It's optimized for size (and speed) to allocate as small as possible amount of your precious 640KB RAM. It currently supports serial and PS/2 mice and, if BIOS support present an
-
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
10
cMIPS
cMIPS - an FPGA ready VHDL model for 5-stage pipeline, MIPS32r2 core
This project was moved to https://gitlab.c3sl.ufpr.br/roberto/cmips The code here is no longer up to date. The VHDL model mimics the pipeline design described in Patterson & Hennessy's book (Computer Organisation and Design) and is an almost complete implementation of the MIPS32r2 instruction set. The TLB and assorted control registers will be included soon (as of fev 2015). The model was synthesized for an Altera EP4CE30F23. The model uses up 15% of combinational blocks and 5%... -
11
SystemManager
The System Manager Project
This is the ultimate Java Application for detect and boost system hardware: RAM, CPU, and all this stuff! -
12
RAM Refresh
Desfragmentador automático de Memoria RAM
Un muy útil programa que le permite desfragmentar la memoria RAM de su sistema, eliminando los espacios ocupados por juegos o programas, que no se liberan al cerrar la aplicación, mejorando así ampliamente el funcionamiento de la computadora. -
13
System Stability Tester is a multi platform open source clone of SuperPI and comes with a GUI and a CLI. It can be used for CPU and RAM burning, stressing and benchmarking.
-
14
Fast Fourier Transforms (FFT) for Multi-CPU (and RAM) Stress Testing. Shows detailed information about physical and logical processors in the system. Included CPU Benchmark feature for speed testing. Automatically utilizes and tests all CPU cores.
-
15
SimpleDets is a simple program in which a user can see the CPU speed and memory amount in a click of a button.
-
16
CPU-G is an application that shows useful information about your hardware. It collects and displays information about your CPU, RAM, Motherboard, some general information about your system and more.
-
17
This project provides a skin for the customizable performance meter 'Rainmeter' (see http://www.rainmeter.net) which includes various information of the local system to be displayed on the desktop (cpu usage, drive usage, network usage etc.).
-
18
Win32::SystemInfo is a Perl module that can get total/free memory on Win32 systems, including installed RAM and page file. It will also access processor information, including family (386,486,etc), speed, name, vendor, and revision information.
-
19
This project provides a set of new features and fixes for MTD drivers and JFFS2 file system intended to improve MTD and JFFS2 performance and reduce JFFS2 RAM usage. Bug fixes are available in form of patches for the particular kernel.
-
20
XMK is a preemptive multitasking kernel for microcontrollers. Its goal is to provide a RTOS small enough (RAM+ROM) to run on 8bit microcontrollers. XMK provides additional/optional features when scaling up to 16bit and 32bit platforms.
-
21
This project is for the Device Drivers and user-space tools for the <a href= http://www.centurion-cd.com/product-dischub.html>Centurion DiscHub.</a>. The device is a 100 CD+-RW/DVD+-RW/DVD-RAM drive with a robotic 100 Disc changer.
- Previous
- You're on page 1
- Next
