Search Results for "ram"

Lenovo Legion Linux (LLL) brings additional drivers and tools for Lenovo Legion series laptops to Linux. It is the alternative to Lenovo Vantage or Legion Zone (both Windows only). It allows you to control features like the fan curve, power mode, power limits, rapid charging, and more. This has been achieved through reverse engineering and disassembling the ACPI firmware, as well as the firmware and memory of the embedded controller (EC).

"KMI Wave-RAM" ("kmiwaveram") "kmiwaveram" contains a "Wave-RAM" of 8 banks of 16K sample words of 16bit each, which can possibly be used in a PPG synthesizer such as the "Wave 2.2", "Wave 2.3", or "EVU". For sample-transfer, "kmiwaveram" has a USB interface and an optional "PPG Communication Bus" interface. On a "CommBusTerm" system, the tools "cbmedimonitor" and "WaveProgEdit" can be used for "fast" sample-transfer to "kmiwaveram" via USB.

Monitoring for your hardware components - CPU - GPU - RAM - Drives - Network - Fans Various customization options, such as - display the app as an app bar (Windows) - autostart after you initially logged in (Windows) - docking location[s] on different screens - adjust application font size & width - tailor update interval to your needs - various color options for you to modify - enable or disable specific monitors, hardware or sensors - and more !

LinuxHardware Info (portable/AppImage) -------------------------------------- Ihr wollt wissen was in Eurem Rechner steckt? Genau das könnt Ihr mit LinuxHardwareInfo, ohne jedes mal die Konsole zu bemühen. Kurz-Info: - Hardware Analyse - einfache Benchmarks (CPU / Grafik/RAM und HHD) - CPU-Live Sensoren - Portable AppImage (einfach vom USB-Stick in Live-Image kopieren) - und anderes - im Support-Forum gibt es alle Infos

"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor * "WaveBackup" backups * "waveaddsynth" for additive synthesis * "wavetransientutil" for transient sounds Copyright (C) 2022-2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. See disclaimers below and within the distribution. ...

...High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. An interrupt pin is not required. Any Arduino IDE >= 1.0.0 should be fine. ...

System Stability Tester is a multi platform open source clone of SuperPI and comes with a GUI and a CLI. It can be used for CPU and RAM burning, stressing and benchmarking.

CPU-G is an application that shows useful information about your hardware. It collects and displays information about your CPU, RAM, Motherboard, some general information about your system and more.

This project provides a set of new features and fixes for MTD drivers and JFFS2 file system intended to improve MTD and JFFS2 performance and reduce JFFS2 RAM usage. Bug fixes are available in form of patches for the particular kernel.

This project is for the Device Drivers and user-space tools for the <a href= http://www.centurion-cd.com/product-dischub.html>Centurion DiscHub.</a>. The device is a 100 CD+-RW/DVD+-RW/DVD-RAM drive with a robotic 100 Disc changer.