Search Results for "ram"

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps). Unfortunately, motor state is controlled by the same hardware register as +3's memory paging features! ...

...High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. An interrupt pin is not required. Any Arduino IDE >= 1.0.0 should be fine. ...

CuteMouse is a DOS based mouse driver, fully written in assembly language. It's optimized for size (and speed) to allocate as small as possible amount of your precious 640KB RAM. It currently supports serial and PS/2 mice and, if BIOS support present an

This project provides a set of new features and fixes for MTD drivers and JFFS2 file system intended to improve MTD and JFFS2 performance and reduce JFFS2 RAM usage. Bug fixes are available in form of patches for the particular kernel.

This project is for the Device Drivers and user-space tools for the <a href= http://www.centurion-cd.com/product-dischub.html>Centurion DiscHub.</a>. The device is a 100 CD+-RW/DVD+-RW/DVD-RAM drive with a robotic 100 Disc changer.