Search Results for "claw-code" - Page 3
Sort By:
Showing 169 open source projects for "claw-code"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
1
stenc
SCSI Tape Encryption Manager
...Built specifically for Linux and AIX. Now supports key change auditing and key descriptors (uKAD). Check the Project News under the Develop section for more information. Project source code has moved to https://github.com/scsitape/stenc -
2
RPi reset/power button
Service and handler code for a power/reset button
This project includes a spin/wait handler for processing reset/shutdown behavior from a button, configuration files for setting this up as a service, and instructions for placing the files and enabling the service. -
3
Cortex GNAT Run Time Systems
Supports writing Ada software for Cortex-M3, M4F boards
DEVELOPMENT OF THIS PROJECT HAS MOVED TO GITHUB, at https://github.com/simonjwright/cortex-gnat-rts This project contains various GNAT Ada Run Time Systems (RTSs) targeted at Cortex boards: so far, the Arduino Due (http://www.arduino.org) and the STM32F4-series evaluation boards from STMicroelectronics (http://www.st.com). It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by only using manufacturer’s software where the same permission applies). -
4
can4linux
CAN bus device driver
can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO -
Try Google Cloud Risk-Free With $300 in CreditUse your credit across every product. Compute, storage, AI, analytics. When it runs out, 20+ products stay free. You only pay when you choose to.
-
5
HWSensors
All information from hardware sensors on your Mac
...All repositories: Sourceforge, sources & downloads: https://sourceforge.net/projects/hwsensors/ BitBucket, sources & downloads: https://bitbucket.org/kozlek/hwsensors/overview Assembla, sources: https://www.assembla.com/code/fakesmc/git/nodes GitHub, sources: https://github.com/kozlek/HWSensors HWSensors Project (c) 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan and others. All rights reserved. -
6
Ocean Optics Sample Pack
Sample code for Ocean Optics OmniDriver spectrometer device driver
Sample code demonstrating how to use OmniDriver to drive Ocean Optics full range of spectrometers from C, C++, C#, Java, LabVIEW, Delphi, MATLAB and more. -
7
Sprut Usb4All Framework
A high level API, that provides access to a Microcontroller with the
This library encapsulates the communication protocol of the Sprut-usb4all. Supporting the of MCD and CDC firmware. -
8
Dual BCD to Hex 7-Seg Driver
A BCD to Hex Dual 7-Segment Display Driver IC using a PLD
...The driver uses a clocked input to multiplex the displays, so that one display is lit when the clock is high, and the other when the clock is low. With a fast enough clock speed the two displays both appear to be displayed at the same time. The code is written for WinCUPL. See the Instructables page for more details. http://www.instructables.com/id/Dual-BCD-to-Hex-7-Segment-Driver/ -
9
CPU Hot Plugging
A program that can plugging CPU core
CPU Hot Plugging (chp) is created by Kafabih (kr code) inspired by Thunderzap android custom kernel cpu governor to reduce battery consumptions because of your laptop CPU usages. Please use carefully, chp can cause system crash or hang because of hot plugging cpu core. -
AI-generated apps that pass security reviewRetool lets you generate dashboards, admin panels, and workflows directly on your data. Type something like “Build me a revenue dashboard on my Stripe data” and get a working app with security, permissions, and compliance built in from day one. Whether on our cloud or self-hosted, create the internal software your team needs without compromising enterprise standards or control.
-
10
PowerLed
RGB power indicator
This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet. -
11
IR-controller
STM-32 code for IR-spectrometer management
This is a project of IR-spectrometer controller. It based on STM32F103 chip with a lot of peripheral devices (1-wire thermometers, stepper motors, platinum thermistors and so on). In future I hope to add here schematics of full control system for this device. -
12
HSK
High Speed Karlsruhe open automotive code initiative
...The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience. -
13
LakeRobotics
Embedded Software Framework for ARM/Cortex Microcontroller
Embedded Software Framework for ARM/Cortex Microcontroller useable especially in robotics applications but also in any other embedded software projects. The framework is based on C/C++ code and includes other open source projects like FreeRTOS, lwIP etc. and also adds additional libraries and tools to provide a powerfull set of functions for embedded software projects At the moment there is just a small Wiki in German language with little information. We will translate, update and enhance these information as soon as possible. -
14
HimemX
The ultimate DOS XMS memory manager
This is HimemX - the open-source XMS memory manager of FreeDOS. Uses unreal mode when possible and has a very low conventional memory footprint. Got any patches? Noticed any bugs? Please report your findings on the FreeDOS mailing list: freedos-user@lists.sourceforge.net -
15
C# source code to get Optris MSPro, MSPlus IR thermometer measures, using the specific Usb/Serial cable (Silicom Lab CP210X USB to UART bridge in fact). For developper only : go to Files menu to get code. Maybe also for LS series. Say me back if it's OK.
-
16
Transistor Specifications
50 most common transistor specs
The specifications and information for the 50 most common transistors used in small electronic circuits, robots, and prototyping. -
17
Resistor Value Identifier
Identify electronic resistor values
This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs. -
18
Xorg X11 dialbox input driver
The Xfree-independent Xorg X11 input driver for the SGI dialbox
This driver allows using the SGI dialbox on linux systems, which lack the Xfree86 library. Users of Redhat EL/Fedora/Centos 64 bit machines may use the rpm to install the driver. Other users currently need to compile the driver source code and install the driver manually. This driver is based on source code available from https://sourceforge.net/projects/dialbox/. -
19
This is a C# library dedicated for using with a www.canusb.com device Full notes: See ReadMe.txt Summary The LAWICEL DLL is 'unmanaged code' and was not designed for use by C#/VB/Mono http://en.wikipedia.org/wiki/Managed_code If you wish to call 'unmanaged code' from 'managed code', you need to use a 'C# wrapper' to access the DLL. This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY UNNECESSARY. ...
-
20
ApproxAdderLib
Library of Approximate Adders
We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan. -
21
A Linux tool for the MikroElektronika (www.mikroe.com) AVRprog2 programming hardware. We have migrated to Github! https://github.com/avrprog2/avrprog2-code
-
22
stakka_klm
Kernel module to manage Disc Stakka Units
...A command-line tool is included to assist with testing and to illustrate the /dev interface. Built with information from various sample coding done by others over the years, who are referenced in the code comments - many thanks to those that have gone before me. -
23
AcerHK GUI
GUI interfaces for Acer Hardware driver -- acerhk.ko
...It is also available at: http://cinnamon-spices.linuxmint.com/applets/view/219 Ubuntu AppIndicator Applet -- currently in development. Stay posted for this. Build Script for acerhk.ko. Use the 11.04+. Includes source code. Please see this projects Wiki for more information. -
24
cMIPS
cMIPS - an FPGA ready VHDL model for 5-stage pipeline, MIPS32r2 core
This project was moved to https://gitlab.c3sl.ufpr.br/roberto/cmips The code here is no longer up to date. The VHDL model mimics the pipeline design described in Patterson & Hennessy's book (Computer Organisation and Design) and is an almost complete implementation of the MIPS32r2 instruction set. The TLB and assorted control registers will be included soon (as of fev 2015). The model was synthesized for an Altera EP4CE30F23. -
25
Linux Kernel Programming IDE (LinK+)
A Simple 'IDE'A for Linux Kernel Developers
LinK+ IDE is a simple IDE for Linux Kernel Developers and Lovers. It is based on Eclipse IDE customized for Linux kernel programming. It reduces the development time and executes code in an elegant fashion. This IDE supports Linux kernel configuration, compilation & emulation, system call development and device driver development. LinK+ IDE includes various templates in the category of character, block and network device driver subsystems for device driver development. It includes various bus infrastructure templates and also provides Linux device driver code completion, code assistance & code navigation for developers. ...
