Search Results for "spi"

...The .7z download is a much smaller file size. https://sourceforge.net/p/sevenzip/ uEZ v2.15.000 updates: Crossworks v5.1, IAR v9.60.3, MbedTLS/CorePKCS11 v3.6.2 with TSL 1.3, full FTP Server, FreeRTOS v11.0.1, auto-expanding heap, time.h include workaround uEZ v2.16.000 updates: Crossworks v5.3, IAR v9.70.2, emWin v6.50, MbedTLS v3.6.5, FreeRTOS v11.2.0, RTT/SystemView Multi-Core support uEZ v2.16.001 updates: Apply this patch over uEZ v2.16.000 to get new SPI flash and I2C external RTC drivers

NOTE: This project is marked with 'Status: Abandoned' on SourceForge because not enough time can be dedicated to this project. However it may still get sporadic commits to the repository. eCxx is a library for AVR and NodeMCU tailored for micro LED displays and lighting effects. eCxx is utilizing Makefile build system. Java and Python based applications/tools are also included to ease the development and debugging process using the host PC. On one side, eCxx supports the original...

Basic Octave implementation of the matlab raspi extension, allowing communication to a Raspberry Pi board to control its hardware.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here....

This library implement RIMS controls for home brewers. For definition of a RIMS, see https://tinyurl.com/j3lyuyc For me, an Arduino micro controller + a LCD Keypad shield was cheaper and a lot more customizable than a commercial PID controller. So, with this library, a commercial PID controller is unnecessary. Automatic PID tuning toolkit is also included. Temperature can be read with a thermistor, a resistance temperature detector (RTD) or any custom temperature probe. Heater is...

This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features.

FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices.

BlackLib library is wrote for controlling Beaglebone Black's feature. It takes power from C++ language. It is created for reading analog input, generating pwm signal, using gpio pins, and communicating with other devices over uart, spi and i2c. In addition to them, it includes debugging feature. So you can check errors after call any function in the library.

Tutorial de como utilizar SDCC con el PIC18F4550. Incluir ejemplos de funciones particulares: adc, spi, i2c, usart, usb, atención a interrupciones etc.

A simple Embedded System Framework that allows rapid development of applications build for AVR family. System is based on a super-loop architecture with check and skip (no-wait) flag event driver system. Supports: UART, SysTick Timer, ADC, SPI, EEPROM, PWM. Also supports: Xilinx FPGA configuration, FPGA SSI interface, smart card reader etc. Tested partially (different modules in each case) on ATMega163/16/32/323/8. Awards CodeProject 2010, Third Prize, Hardware and Device Programming Check the Wiki Page for more details.

Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.

Simple serial (SPI) programmer for small AVR MCUs written in C++ with Qt4 for Linux. PC interface is compatible with RS-232. HW consist of just a few transistors, resistors and diodes. SW is highly modular and quite simple to understand. Good luck !