Open Source Linux Embedded Systems Software - Page 2
Sort By:
Embedded Systems Software for Linux
View 21 business solutions-
Enterprise-grade ITSM, for every businessFreshservice is an intuitive, AI-powered platform that helps IT, operations, and business teams deliver exceptional service without the usual complexity. Automate repetitive tasks, resolve issues faster, and provide seamless support across the organization. From managing incidents and assets to driving smarter decisions, Freshservice makes it easy to stay efficient and scale with confidence.
-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
1
Testability Measurement Tool
Performs SCOAP and PODEM algorighms on ISCAS89 Netlists.
This application calculates combinational and sequential SCOAP parameters (CC0, CC1, CO, SC0, SC1, SO) and Testability Index parameter from a ISCAS89 netlist. It also performs the PODEM algorithm to check testability of a net against a single stuck at 0 or 1 fault. -
2
scmRTOS is tiny Real-Time Preemptive Operating System intended for use with Single-Chip Microcontrollers. scmRTOS is capable to run on small uCs with as little amount of RAM as 512 bytes. The RTOS is written on C++ and supports various platforms.
-
3
Alternative firmware and software with open source for platforms based on the SoC Realtek RTL8186. Альтернативная прошивка и ПО с открытым кодом для платформ на базе SoC Realtek RTL8186.
-
4
freeRTOS & libraries for AVR ATmega
freeRTOS for Arduino Uno, Goldilocks 1284p & Mega 2560
AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases. Please check at Github for the latest commits. https://github.com/feilipu/avrfreertos The Goldilocks Analogue story is told here. http://feilipu.me/?s=Goldilocks+Analogue The Goldilocks 1284p story is here. http://feilipu.me/2013/03/08/goldilocks-1284p-arduino-uno-clone/ If this repository is too complicated to get started, a minimum AVR freeRTOS configured using the Watchdog Timer and Heap 3 is also also available. https://github.com/feilipu/miniAVRfreeRTOS For the Arduino platform there is a freeRTOS Library available in the Arduino IDE Library manager. https://github.com/feilipu/Arduino_FreeRTOS_Library -
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
5
tew-652brp_v2_wcl
Client mode firmware for TrendNET TEW-652BRP V2
Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client. -
6
Easy CNC
Modular CNC software for Arduino controller
The goal of the project is the realization of a modular firmware that allows to control a CNC machine with different utensils. For instance, a CNC with a drill, with few changes can become a plotter with a pen or cutting machine to cut cardboard or stickers. In order to do that, we want project a CNC router with a mechanism that allows a fast utensil change and a controlling firmware which can use different utensils changing some configuration parameters. -
7
OpenSPA
OpenSPA MOD for OpenPCTV
-
8
-
9
Arduino Si4735 radio library
Arduino and Silicon Laboratories Si4735 radio library
This library controls many Silicon Laboratories Si47xx family radio chips with an Arduino microcontroller. Major features include: • I2C and SPI bus • Supports "original" (Uno, Duemilanove, and their clones), Mega 2560, Leonardo, and Due Arduinos • FM/AM receive modes; including short, medium, and long wave AM • Analog and/or digital audio output • FM RDS and RBDS • Localization of receive bands, channel spacing, FM de-emphasis, and RDS/RBDS • Correctly decodes RBDS PI codes into station's call letters • Can handle a mix of RDS and RBDS stations as found near the US boarders with Canada and Mexico • Example programs I2C and Due support is alpha because I do not have hardware to test these features. -
$300 in Free Credit Towards Top Cloud ServicesStart your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
-
10
KaeilOS
Koan Advanced Embedded Industrial Linux Operating System
KaeilOS is an embedded linux GNU/GPL distribution composed of a collection of the best publicly available Open Source packages. Version 4.00 available since January 2009 has joined OpenEmbedded project offering a wider selection of packages and recipes. -
11
amforth: Interpreter on Microcontrollers
amforth is an extendible interpreter on microcontrollers
amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard. -
12
The wolfSSL embedded SSL library (formerly CyaSSL) is a lightweight, portable, C-language-based SSL/TLS library targeted at IoT, embedded, and RTOS environments primarily because of its size, speed, and feature set. It works seamlessly in desktop, enterprise, and cloud environments as well. wolfSSL supports industry standards up to the current TLS 1.2 and DTLS 1.2, is up to 20 times smaller than OpenSSL, offers a simple API, an OpenSSL compatibility layer, OCSP and CRL support, is backed by the robust wolfCrypt cryptography library, and much more. wolfSSL relies on the FIPS 140-2 validated wolfCrypt library for all cryptographic functionality. Visit http://wolfssl.com/wolfSSL/fips.html for more info!
-
13
FlashProg
Simple USB flash memory programmer.
FlashProg is USB base flash memory programmer which is specifically design to read and program 3.3V SPI flash memory devices. -
14
octave-raspberrypi
GNU Octave toolkit for controlling a Raspberry Pi
Basic Octave implementation of the matlab raspi extension, allowing communication to a Raspberry Pi board to control its hardware. -
15
OpenSOC86
Open implementation of the x86 architecture
OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios and DOS in simulation. The system is targeted to run on the DE2-70 board. In order to run the system in hardware a SDRAM and SRAM controller need to be added. These are currently in development. -
16
Ficl is a lightweight, embeddable scripting language designed to be incorporated into other programs, and especially embedded systems that may have memory and OS constraints. Applications include scripting, hardware bring-up, rapid prototyping, and system extensions. Unlike Lua or Python, Ficl acts as a component of your system - you feed it stuff to do, it does the stuff, and comes back to you for more. You can export compiled code to Ficl, execute Ficl code from your compiled code, or interact. Your choice.
-
17
WinDS
Windows XP reimplemented on Nintendo DS
WinDS is a Reimplementation of the OS Windows(R) XP(R) on the Platform Nintendo DS. Since i started coding Apps for the NDS, my goal was to write a program, called WinDS, which does (nearly) the same as the real appy by Microsoft. In contrast to other little NDS-Operating Systems, just like Woopsi etc. you can code your own Application in Lua for WinDS: just copy the Code onto the FAT-Disk and execute it from within WinDS! This is what makes WinDS so unique. The New Beta 0.95 is out, it features - 52 Classes that are already available within Lua - 25 different types of user interface classes - 8 different predefined dialogs which makes it the perfect GUI sandbox for DS. PS: More time without update means: next update will have even more improvements, as i am still developing ;) -
18
ArduSim
To be a practical Arduino simulator
ArduSim provides API level simulation of an Arduino. Arduino sketches can be run and debugged on PC with no modification. ArduGate is a sub-project of ArduSim. The agent sketch is shared. -
19
EmbeddedGUI is a GUI library for embedded system.It is much smaller than MiniGUI and can be easily transplanted to any RTOS.It provides many graphic functions and controls such as list and tree.LCD drivers are also included.Works with ARM7,ARM9,MSP430etc
-
20
Terminal-BASIC
BASIC-like language interpreter for embedded systems
Terminal-BASIC is a BASIC-like language interpreter, works on a set of single board embedded systems (i.e. famous AVR uc based boards). Terminal-BASIC: * suports real numbers, multidimensional arrays and Darthmouth BASIC-style matrix operations; * written in C++11; * has modular structure (can save uc storage, instantiating only used modules); * works through different i/o devices, using vt100 commands; * on systems with multiple i/O devices can work as simple time-sharing system; * static Linux build for playing and debug; -
21
BACnet for Dynamic C
BACnet stack for Rabbit 4000/5000/6000
This is a Dynamic C port of the BACnet stack at http://sourceforge.net/projects/bacnet. This BACnet library provides a BACnet application layer, network layer and MAC layer communications services for systems based on the Rabbit 4000, 5000 and 6000 processors. The rich feature set of the BACnet stack provides an ideal platform for developing Rabbit based control devices which can use the many BACnet tools out there to reduce the development time and effort. -
22
Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.
-
23
With GLCD Tools you can convert windows bitmap files (bmp) to a byte array suitable for graphic LCD displays. Additionally you can create fontsets out of your system fonts for the displays. It outputs C Code which you can use in your µC project.
-
24
Toybox
Embedded linux and cross toolchain
Embedded linux and cross toolchain Toolchain 20141105 - Updated gcc 4.9.2, gdb 7.8.1 SDK V0.6 - Added SDL2_image, SDL2_ttf library. -
25
