Search Results for "mingw-arm"

Ngspice project aims to improve the spice3f5 circuit simulator.

Icarus Verilog is an open source Verilog compiler that supports the IEEE-1364 Verilog HDL including IEEE1364-2005 plus extensions.

AUDio MEasurement System - a multi-platfrom system for audio measurement through sound card in the PC. It contains: generator, oscilloscope, audio spectrum analyzer (FFT) and frequency sweep plot. Compiles and works under Linux, Windows and MacOS. Source code is available in "git" and as ZIP snapshot. For more information see README.md

ePnR is a simple Integrated Circuit (IC) block standard cell placement & routing tool. ePnR currently supports only circuit blocks using equal height standard cells arranged in one or more channels of user configurable length. Standard cells are described in a simple text based library (compliant with eLogSim). Placement follows initially the cell call order in the SPICE like circuit input netlist. However, a placement optimization, aiming at minimum weighted accumulated wire length, by...

eLogSim is an event driven, 4-level (0,X,1,Z) digital circuit simulator. It uses a test oriented stimulus approach and offers a statistical (or exhaustive if it makes sense) fault simulation option. eLogSim has a simple GUI and is pre-compiled for Ubuntu 20, Mint 20, CentOS 8, openSUSE 15, FreeBSD 12, Solaris 11, Windows 10/11 & Raspbian/Raspberry PiOS Buster (32/64bit) & Ubuntu-MATE 20.04 (64 bit) operating systems. Cross platform & -network, concurrent fault simulation now available....

SmGen is a finite state machine (FSM) generator for Verilog. On the other hand, it is not an FSM entry tool. The input is behavioral Verilog with clock boundaries specifically set by the designer. SmGen unrolls this behavioral code and generates an FSM from it in synthesizable Verilog. Clock boundaries are explicitly provided by the designer so there is good control on the expected timing

Gerbv is an open source Gerber file (RS-274X only) viewer. Gerbv lets you load several files on top of each other, do measurements on the displayed image, etc. Besides viewing Gerbers, you may also view Excellon drill files as well as pick-place file

Capsim(r) C Text Mode Kernel(TMK),DSP and communication blocks, topologies, libraries and tools for the development of high performance block diagram digital signal processing and communications systems,built in interpreter for scripting.SystemC support.

... : Similar with mainstream market tools IDE and GUI Wrapper like : LabView©, Proteus©, MPLab©, Eagle CAD©, Tools Suite for Most Market Microcontroller. Tools suite for Arduino, Pinguino, Pic, AVR, ARM, Basic Stamp, Risc, other platform Fully Integrated IDE. Adobe PDF Help section SQL Connectivity Community Avail : https://www.facebook.com/Project-Core-2306-Nextgen-Eda-pcbradide-for-Mcumacoslinuxwindows-138250749681138/?fref=ts

QSapecNG is a Qt-based symbolic analysis program for linear analog circuits. In fact, it consists of two indipendently parts: the SapecNG framework engine, and the application gui QSapecNG.

"kdiv" is a generator of routines for optimized division by an integer constant based on the work presented in H.S. Warren's "Hacker's Delight". "kdiv" can be used to emit a generic assembly or C implementation of (signed/unsigned) division.

The sigrok project aims at creating a portable, cross-platform, Free/Libre/Open-Source signal analysis software suite that supports various device types, such as logic analyzers, MSOs, oscilloscopes, multimeters, LCR meters, sound level meters, thermometers, anemometers, light meters, dataloggers, function generators, power supplies, GPIB interfaces, and more.

"mprfgen" is a multi-port memory generator that can be used for VHDL designs. It can generate either generic or Xilinx-specific (through component instantiation) multi-port memories.

This is a Traffic Light with capability of controlling 4 sets of Lamps and Passengers light with one Counter and LCD for displaying the Time for every set of red light.

LSim is a software for simulation and make executables to ARM Cortex-M3 mcu from logic gates diagram. LSim can compile logic gates diagram and generate binary executable files (*.bin, *.hex) for cortex-m3 mcu´s (LPC1768, under development).

IMPORTANT: The flosslogic project has merged with the sigrok project. Development continues in the sigrok wiki, mailing lists, IRC channel, and git repository.

SimIt-ARM: very fast functional and cycle-accurate simulators for ARM.

Spice+ is a general-purpose circuit simulation program, based directly on SPICE 3F.5 from the University of California (Berkeley). An improved version of Spice for DOS, Windows and Linux. http://spicep.sourceforge.net

pyLPCTools is a replacement for the Flash Programming Tools use with the Philips(tm)/NXP(tm) LPC2xxx series of ARM based microcontrollers. pyLPCTools is a script together with some ARM assembly language and a Python user interface. Please Donate !!

This software generate a complete project for ARM LPC 2119,2129,2292,2294,2194. It generate the main file, Makefile, and a initialisation file with a graphical interface. It's very useful because it calculate all value for the peripherals.

A GTK+/Gnome2 graphical front end for the IW3HEV Vector Network Analyzer, also has a signal generator, and It displays graphicaly SWR, Phase, Return Loss, X impedance, Serial resistance, |Z| Impedanze, and Inductance, and capacitance.