Open Source Fortran Earth Sciences Software

gputils is a collection of tools for Microchip PIC microcontrollers. Its goal is to be fully compatible with Microchip's tools, MPASM, MPLINK, and MPLIB.

Please go to project home (https://hypeweb.smhi.se/model-water/) or wiki-pages (http://hype.smhi.net/wiki/doku.php?id=start) for more information. The hydrological model HYPE is developed at the Swedish Meteorological and Hydrological Institute (SMHI). The model simulates water, nutrients and other substances in small and large river catchments. Included in the project is HYSS, which is needed to run the model. It handles input and output and the simuation over time.

CPSeis is the open-source version of ConocoPhillips' former seismic processing system. Uses Fortran 90 and C/C++ layers for I/O. The new system was designed using an MPI-parallel model and works well on Linux clusters or on individual workstations.

The Ocean Land Atmosphere Model (OLAM) is a new global general circulation/climate prediction model that will allow to “nest down” to any desired resolution using a flexible mesh refinement technique that works on either triangular or hexagonal g

The latest ESMF development is happening in GitHub: https://github.com/esmf-org/esmf https://earthsystemmodeling.org The Earth System Modeling Framework provides high-performance software infrastructure and superstructure for the construction and coupling of climate, weather, and data assimilation applications.

Glimmer is an open source (GPL) three-dimensional thermomechanical ice sheet model, designed to be interfaced to a range of global climate models.

A model of the water, C, nutrients and microbial communities of the Amazon River. This project is still in development, the code may not be functional at this time. Most recent code version is under Files, labeled ROCA-date

Free cross-platform viewer for seismic data in SEG-Y format (Revision 1 draft 6 and its modifications).

MieConScat is a GUI/Console program for generating MIE SCATtering data as a table of cross sections. It can generate scattering cross sections over specified angular ranges and total absorption cross sections. It was initially developed to aid work with optical particle counters (OPC) especially when CONverting data between cross section and diameter space. These methods are described in Rosenberg et al. 2012, Particle sizing calibration with refractive index correction for light scattering optical particle counters and impacts upon PCASP and CDP data collected during the Fennec campaign and CDP data collected during the Fennec campaign, http://www.atmos-meas-tech.net/5/1147/2012/amt-5-1147-2012.html

A library collection of FORTRAN 90 subroutines and functions for the handling of raster images and for remote sensing applications. The 'fwtools' name evolved from 'framework tools'.

The Modular System for Shelves and Coasts (MOSSCO) is a coupling framework for Earth System Models. It helps users to integrate their own numerical models with other developments. Quick Start: git clone git://git.code.sf.net/p/mossco/setups mossco-setups git clone git://git.code.sf.net/p/mossco/code mossco-code cd mossco-code cat QuickStart.md or read online https://sf.net/p/mossco/code/ci/master/tree/QuickStart.md Beware: this is alpha software, expect trouble! ------------------------- Better, read the full documentation online http://www.mossco.de/doc or make it yourself make doc acroread doc/mossco_documentation.pdf ---------------------- Why MOSSCO? MOSSCO, the "Modular System for Shelves and Coasts" is a framework for coupling processes or domains that are originally developed in standalone numerical models. The software MOSSCO implements this infrastructure in the form of a library of components and couplers, and of example coupled application.

This is an simple ecological model for lakes and reservoirs that contains a very detailed description of the most relevant nitrogen processes. The model is not very complete, but the main intention is to develop a library to be coupled with other models and use the full-mixed model as a testing version. A lot of things can be improved. I will read all the suggestions but I cannot promise that I will include all of them. Every new part of the code will contain the name of the author. If someone contributes improving the capabilities of this model in a substantial way, I will include that person as co-author of the model in the next version release. I hope this will promote people to contribute. Of course, fixing bugs or minor changes will also be mentioned with the corresponding author. Thanks a lot. I hope this can be the seed of a Open Source Community of Ecological Modellers.

A spectral element method for 2D wave propagation and fracture dynamics, with emphasis on computational seismology and earthquake source dynamics.

GeoSolid3D produces 3D geologic solid models, incorporated into the aquifer and confining units of the USGS ground water models, Modflow and Sutra. Uses GIS data of DEMs, geologic maps, and maps of river, watershed, recharge, and aquifer parameters.

Development of new data assimilation techniques for ocean models

Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT), is a powerful and complete front-end to a rich set of visual-data exploration and analysis capabilities well suited for climate-data analysis problems.

WEST (Wind Energy Simulation Toolkit) is a wind simulation application. It can be use to obtain high resolution results at various altitudes.

Generic data-assimilation toolbox written in java, with native (c and fortran) libraries for high performance computing. Provides tools to couple to your own model and a wide range of algorithms, ranging from parameter calibration to Kalman filters.

This page is kept for those that want to use the legacy v1 version. For current download, source, and information please go to: https://code.usgs.gov/modflow/mf-owhm ----------------------------------------------------------------------------------------------------------- The One-Water Hydrologic Flow Model (MODFLOW-OWHM, One-Water) is an integrated hydrologic flow (IHM) model that is an enhanced fusion of multiple MODFLOW (MF) versions. While maintaining compatibility with existing MF versions, MF-OWHM includes: linkages for coupled heads, flows, and deformation; facilitation of self-updating models, additional observation and parameter options for higher-order calibrations; and redesigned code for faster simulations. MF-OWHM represents a complete IHM that fully links the movement and use of groundwater, surface water, and imported water for consumption by agriculture and natural vegetation on the landscape, and for potable and other uses.

A collection of Fortran interfaces to the most common Open Source GIS libraries, plus some more Fortran-specific tools.

Geostatistical software made within research centre CERENA/CMRP. NOTE: GEOMS2 (beta release) is available for download in this link https://sourceforge.net/projects/geoms2/

This software package was developed to supply a portable decoding package (written in C and callable by Fortran) compatible to some extent with ECMWF GRIBEX routine.

NO FURTHER DEVELOPMENT AT THE MOMENT DUE TO OTHER OBLIGATIONS. The FMet software package can be used for the scientific processing of Meteosat SEVIRI data. A full description can be found in http://dx.doi.org/10.1016/j.cageo.2007.12.006

* Please check latest update on https://github.com/igps-ftk/iGPS A tool written in Interactive Data Language (IDL), for processing and analyzing daily continuous GPS position time series. It can read time series in various formats, detect outliers, remove abnormal observation spans, find jumps, extract common-mode components(CMC), etc.

This project contains some programs that designed to process gravity data through applying of the reductions to determine the Bouguer gravity anomaly and to model the subsurface structures by forward and inverse methods as well as some programs to determine geo‌detic parameters from geo‌potential mo‌dels. This project may be useful in Geodesy and Geophysics.