Search Results for "open project"

ESP-Drone is an open-source quadcopter platform built around Espressif ESP32, ESP32-S2, and ESP32-S3 microcontrollers. It combines lightweight hardware with firmware derived in part from the Crazyflie project. Pilots can control the drone through a mobile application or compatible gamepad over wireless connections. Stabilize mode provides basic assisted flight, while additional hardware enables height-hold and position-hold modes.

DroneBridge for ESP32 is lightweight firmware that turns inexpensive ESP32 boards into wireless telemetry links for drones and other vehicles. It bridges serial data to standard Wi-Fi, Wi-Fi Long Range, ESP-NOW, or Bluetooth Low Energy. MAVLink, MSP, LTM, and arbitrary serial payloads can be transported through the system. Standard Wi-Fi can reach roughly 150 meters, while compatible ESP-NOW or long-range Wi-Fi setups can extend much farther. Traffic can be encrypted with AES-256-GCM,...

...Firmware updates can be delivered over Wi-Fi, while Bluetooth or Wi-Fi modes can emulate a simulator joystick. Bind phrases simplify pairing without requiring physical bind-button procedures. The project also supports telemetry, displays, and remote configuration of compatible video transmitters and receivers.

dRonin is an open-source autopilot and flight-controller firmware for hardware derived from the OpenPilot and Tau Labs ecosystems. It is designed for acrobatic flying, racing, autonomous flight, and vehicle research. The project supports a broad range of flight-control boards, including OpenPilot Revolution, BrainFPV, Sparky, Quanton, and several racing-oriented controllers.

The DTC (Drone Traffic Control) project for air traffic drones. It also utilizes DGPS for accurate position measurement of the drones.