Search Results for "system info software"

This device shows MeshCore path information on its display. A map with known repeaters of the region are displayed and a table of the connection path the observer reporting to the MQTT server is shown. The MQTT server is not part of this repository.

Opensource frimware for platforms based on some SoC (Realtek RTL8186 - Wive-NG, Realtek RTL8671B/RTL8671BH/RTL8672 - Wive-NG-DSL, Ralink RT3050/RT3052 - Wive-NG-RTNL, MT7620/MT7621 - Wive-NG-MT) For detailed discussion of commercial use please mail to info@wi-cat.ru. For more details in russian please go to https://wi-cat.ru Any support for end user only in https://wi-cat.ru/forums/ forum page. Author page: http://wive-ng.sf.net Commercial support support@wi-cat.ru Supported...

...TCN (Train Communication Network) is a series of international standards (IEC61375) developed by Working Group 43 of the IEC (International Electrotechnical Commission), specifying a communication system for the data communication within and between vehicles of a train. It is currently in use on many thousands of trains in the world in order to allow electronic devices to exchange information while operating aboard the same train. TCNOpen follows the Open Source scheme, as the software is jointly developed by participating companies, according to their role, so as to achieve cheaper, quicker and better quality results. ...

GoldBug is a decentralized & secure communication suite that offers an integrated e-mail client, an instant messenger & a file transfer. Also included is an URL-RSS-DB & a p2p web search. Current vers. w/ McEliece Algorithm. GoldBug has been 2013 - 2023 ten years just another Graphical User Interface of the Spot-On Encryption Suite. Main GUI features: Minimal & colorful Interface with Tabs in the East. Microsoft & Qt MinGW deprecated Win32 & for Compiling: ●...

Remoto es una aplicación Java ME usada para ejecutar comandos en Linux vía bluetooth. ¡Ahora se incluyen versiones compiladas para linux adm64 y linux x86! ---- Remoto is a Java MIDlet used to execute commands on a Linux system via bluetooth It now includes pre-compiled versions for linux amd64 and linux x86! If you need this software translated to a different language please post about it in the forums.

The ezLINX iCoupler Isolated Interface Development environment provides developers with a cost-effective, plug and play solution for evaluating eight physical Layer, digitally-isolated communication standards(USB, RS-422, RS-485, RS-232, CAN, SPI, I2C and LVDS). The Blackfin ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards.The Interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler and isoPower® digital isolator technology.

Codegroup is a Java application that will allow one to convert binary (or text) computer files in to 5 letter codegroups for transmission over email, landline telephones, radioteletype or Morse Code. Codegroup has internal error correction & limited cryptography capabilities. Codegroup : ZZZZZ YBPIL AIAIG FMOPP CPAAA DGNGP GPGPA ADNJN ELJKO ELIMO GEOHF KIFGP IFBCB PKCPI YJMHE PHBHP PPOBH NCOHD AKLLL AGHFP DEGEF LKELC EAIJI ABAGP AHPPO IHHPH OHPDF YNFPB ALEPO KMPKP Once this...

Lets you monitor your GPS-phone. You have full control of your own data. Both client software (for phones) and server software is free open source, so you might set up your own server or use the default one at opengeotracker.org

The Milkfish is an Embedded Communications Software Project. Main objective is to provide a basic NAT traversal solution for cheap hardware enabling a practical setup of multiple SIP phones in a LAN sharing a WAN connection with one public IP address.

BITXml is an open xml based protocol for Machine to Machine communications. BITXml is both language and "transport" agnostic and covers all the requirements of a generic M2M telemetry & control application. For more info www.bitxml.org

Antitheft software for WM5 and WM6 phones with GPS module(tested on Eten X500+ and Mio A701). Useful for searching of lost/stolen phones and children monitoring. Can monitor sim card changes. Coordinates of the phone can be acquired by SMS.

flixx is a modification of the router system fli4l. The difference is the support of C++ while staying as compatible as possible to the original system. The project provides the router system itself and a build environment to create custom binaries.

rtusd is a foundation set of real time enabled User Space Devices/Drivers designed to link to HRT high resolution Timer controlled POSIX threads and link re-factored Linux hdw drivers for 2.6.18+. rtusd propogates Linux RT to user space generically.

Voxampp is an Enterprise IP TriplePlay Application Stack (eIPTAS) a - run-time toolkit - for Internet Entrepreneurs that want to deploy rich IP Carrier Networks. Its goal, to facilitate worldwide Open Access Social Networks using IPTV, VoIP and much more

CAMA (Context-Aware Mobile Agents) is a middleware for supporting mobile agents coordination. It is based on Linda-style coordination and provides numerous extentions for interoperability and fault-tolerance. It supports portable platforms such as PDAs.

SIPatHome was based on the SIP Express Router (SER) which is a well-tested, configurable, free and RFC3261-compliant SIP proxy. The project was providing VoIP server software for the embedded Linux distribution OpenWRT on affordable Linksys WRT hardware.

This project will revolutionize client to server program communications. Open source versions of anything we release, will be available here.

The project will integrate viable aspects of the semantic web technologies for use with advanced Semantic SQLCLI based XML DBMS. The purpose of this project is develop a GUI Application for a Suite of ECM Services.