Search Results for "cable"
Sort By:
Showing 37 open source projects for "cable"
View related business solutions-
Demo Series - Small Business Backup By VeeamWatch this on-demand demo series and learn how to protect your Microsoft 365 data with clear, simple, actionable steps that are easy to implement for businesses of all sizes.
-
One Monitoring Tool for IT, OT and Cloud | Free TrialModern infrastructure spans data centers, cloud platforms and factory floors, and every blind spot between them is a risk. PRTG supports SNMP, WMI, SSH and other standard protocols to monitor IT, OT and hybrid environments through one customizable dashboard. Build the views your team needs, from network health to application performance, without switching tools. Try PRTG free for 30 days now.
-
1
LPrint
A Label Printer Application
...Each printer can support options such as label modes, tear-off offsets, media tracking, media top offset, print darkness, resolution, roll selection, and speed. Each printer can directly print “raw”, Apple/PWG Raster, and/or PNG files. Each printer automatically recovers from out-of-media, power loss, and disconnected/bad cable issues. For LabelMANAGER 400, LabelMANAGER 450, LabelMANAGER PC, LabelMANAGER PC II, LabelMANAGER PNP, LabelPOINT 350, LabelWriter 300, LabelWriter 310, LabelWriter 315, LabelWriter 320, LabelWriter 330, LabelWriter 330 Turbo, LabelWriter 400 printers. -
2
HackRF
Low cost software radio platform
...Designed to enable test and development of modern and next-generation radio technologies, HackRF One is an open-source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection-molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing the transmission of radio signals. You are responsible for using your HackRF One legally. -
3
mGBA
mGBA Game Boy Advance Emulator
mGBA is a high-performance, open-source emulator designed to accurately replicate the behavior of the Game Boy Advance hardware while maintaining fast execution across a wide range of devices. The project was created with the goal of improving both accuracy and speed compared to earlier emulators, achieving a balance that allows games to run reliably even on lower-end systems. It supports not only Game Boy Advance titles but also Game Boy and Game Boy Color games, making it a versatile... -
4
AcousticSoundboard
Free, easy to use, lightweight soundboard for Windows
...View a demo video here https://www.youtube.com/watch?v=cPdncc-q1oM If you want others to hear your microphone and the sounds you play, you will first need to install a virtual audio cable such as this one: https://vb-audio.com/Cable/ IMPORTANT: Windows may warn you that this program contains a virus because it hooks the keyboard. Your data stays on your computer only. Please see the readme for more information. -
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
5
...Win NT/2K/XP/7/8/10/11, Linux/i386/AMD64/ARM, FreeBSD and MacOS X kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4linux. Also supports the XU1541 and the XUM1541 USB devices (a.k.a. "ZoomFloppy").
-
6
newlearnerspermit
C for programmable guitar amp
...All of the processed signals will pass through and be amplified by a clean master volume controlled power amp. The digital effects will be toggled by means of a floor panel controlled by digital foot switch controller communication with the Arduino hardware via a digital cable. Also, the preamp signal can be alternatively connected to a separate power amp. -
7
microDrum
DIY MIDI Drum Trigger
...The output can be sent to a PC and converted to drum sounds through VST like BFD, Addictive Drums and Superior Drummer, etc. … The accompanying software allows features not found in any similar solution: a direct interface with VST (without USB-MIDI cable), record, playback of tablature to practice on, etc. … This is a Open Hardware product made in Italy! -
8
Pinguino IDE
Pinguino packages
...Pinguino comes with a USB Bootloader, a small program running inside the microcontroller which is responsible for transferring your application from your PC to the microcontroller memory and handing over the control to this program afterwards. No programmer is then needed, only a USB cable and a PC. Pinguino is also an Integrated Development Environement (IDE) which gives everyone the ability to write, compile and upload programs on a Pinguino board. -
9
patient0
An Atari-ST floppy copier via parallel port
Primary design to backup Atari ST floppies on a Linux box via a simple ECP compliant cable, patient0 is a command line utility that could be extended for other platforms. -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
10
AntennaTuner
A remote symetric antenna tuner using switched relays.
This is project about DL3LAC's Antenna Tuner called "Christian-Koppler". The original tuner used an semidigital remote controller and 24line cable between the tuner unit and remote controller. I decided me to build the tuner unit and replaced the controller part by an ATmega MCU on both sides and linked them with cheap network cable. The used protocol between the controllers are RS422 based and is frame based with checksum. The tuner relays are switched each sepperate and the I/O unit are an two MCP23017 as I2C-Bus expanders.The MCU is an ATmega88 in a small housing. ... -
11
Virtual Audio Pipeline
A WDM Virtual Audio Loopback Cable/Device
Virtual-Audio-Pipeline:- A WDM Virtual Audio Cable/Device It is a WDM based Virtual Audio Device Driver, can be used as a Virtual Sound Card. No Hardware is requred. Can be used as an Audio Loopback Device. The following are its Features 1. Supports PCM, WAVEEXTENSIBLE format 2. Supports 8 to 32 bit sample format 3. Supports 8000 to 192000 Hz Sample rate 4. Supports upto 7.1 surround sound 5. -
12
mwetoolkit
THIS PROJECT MIGRATED TO https://gitlab.com/mwetoolkit/mwetoolkit3/
THIS PROJECT MIGRATED TO https://gitlab.com/mwetoolkit/mwetoolkit3/ The Multiword Expressions toolkit aids in the automatic identification and extraction of multiword units in running text. These include idioms (kick the bucket), noun compounds (cable car), phrasal verbs (take off, give up), etc. Even though it focuses on multiword expresisons, the framework is quite complete and can also be useful in any corpus-based study in computational linguistics. The mwetoolkit can be applied to virtually any text collection, language, and MWE type. It is a command-line tool written mostly in Python. ... -
13
ut61
Interface for the UNI-T UT61D
This is an inteface for the data acquisition cable for the UNI-T (Uni-trend) UT61D multimeter. It supports both USB (using libusb) and RS232 cables. The interface consists of a single C header file. -
14
onet
OctopusNet - SAT>IP Server with various possibilities
The High-End Networktuner - Octopus Net The Octopus Net is streaming LiveTV to IPTV-Ready devices in the local network. It makes so many devices to a FullHD (*1) receiver for satellite television and cable television. Thereby will send the FTA Channels (*2) in FullHD in the LAN or WLAN Network. Up to 4 streams - depending on model - may be used simultaneously on stationary and mobile devices. The to-use client software (*3) is for the operating systems iOS (iPhone, iPad), Android, Mac OS and Windows already from various manufacturers available on the market (Smart TVs, Windows Phone, Windows RT and Kindle Fire HD in preparation). ... -
15
prog89s52
Utility for programming an AT89S52 via a parallel port.
...Atmel's 89S are programmable via an SPI port and therefore require absolutely no additional components in order to program them in-system. This program requires a standard "Centronics" type PC parallel port (a bidirectional, EPP or ECP port is not required). A 5-way cable is required to connect the microcontroller to the port; wiring information is given in the included manual page. Remember that a clock source is required in order to program the device, and that EA must be tied to Vcc when programming the internal flash memory. Note that since prog89S52 uses ioperm() and friends to access the underlying port hardware, you may need to run it as root. ... -
16
...Allows automatic mapping of virtual channel numbers to callsigns and physical channels. Useful for the transition from analog CATV to digital CATV. Comcast is one such cable provider making these tables available.
-
17
BASIC interpreter for the 16bit PIC microcontroller 24FJ64GA002. The interpreter runs on the chip only, no compiler/tokenizer is needed. Communication with PC is done by USB-to-serial converter cable.
-
18
The N8VB vCOM Virtual Serial Port Driver creates pairs of virtual serial ports on your Windows 2000 or XP system that are "virtually" connected together like a null modem cable. It behaves like a Virtual Null Modem Cable.
-
19
elbug - electronic keyer at serial port
elbug - simple c program for electronic morse key at the serial port
a simple c program for an serial elbug = electronic morse key.which is to be plugged to the serial port, its output is also a pin in the serial port. Just compile it by 'gcc elbug.c -o elbug' or use the ready-compiled file and copy elbug to user/local/bin. /* Call it as root. */ How to cable your homebrew elbug? Middle pad: +9V battery via Resistor 2k Left contact: -> DCD (9-pin plug: 1) (25-pin plug: 8) Right contact: -> CTS (9-pin plug: 8) (25-pin plug: 5) Ground: -pole battery (9-pin plug: 5) (25-pin plug: 7) /* by Günther Montag , ex- dl4mge now maintained by Patrick Strasser OE6PSE (trapicki) now actual version also at https://github.com/trapicki/elbug */ -
20
...Applications designed to Reset, Read Faults and Calibrate the Range Rover P38a/Classic Electronic Air Suspension. Using a custom ODDII(P38a) or Diagnostics(Classic) cable faults can be read and reset. Calibration is also possible.
-
21
dvbsnoop - DVB analyzer / MPEG analyzer program to monitor, analyze, debug, dump or view dvb/mpeg/dsm-cc/mhp stream information (TS, PES, SECTION) (e.g. digital television) send via satellite, cable or terrestrial.
-
22
This is a small implementation of the communication protocol OBEX over a slow, serial cable. It's primary use is to communicate with cellphones, more specifically the SonyEricsson brand phones.
-
23
Linux driver for Direct Linq pc to pc USB cable. Also contains ftp gui application for file sharing.
-
24
s10sh is a command line software utility to download pictures from Canon digital cameras via a USB or serial cable. It also allows for other direct control of the camera and to explore the embedded processor.
-
25
Red Pixel is a platform deathmatch game for two players. It can be player over a LAN or a serial cable link.
