Search Results for "cable"

...Designed to enable test and development of modern and next-generation radio technologies, HackRF One is an open-source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. HackRF One has an injection-molded plastic enclosure and ships with a micro USB cable. An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One. HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing the transmission of radio signals. You are responsible for using your HackRF One legally.

Primary design to backup Atari ST floppies on a Linux box via a simple ECP compliant cable, patient0 is a command line utility that could be extended for other platforms.

Virtual-Audio-Pipeline:- A WDM Virtual Audio Cable/Device It is a WDM based Virtual Audio Device Driver, can be used as a Virtual Sound Card. No Hardware is requred. Can be used as an Audio Loopback Device. The following are its Features 1. Supports PCM, WAVEEXTENSIBLE format 2. Supports 8 to 32 bit sample format 3. Supports 8000 to 192000 Hz Sample rate 4. Supports upto 7.1 surround sound 5.

a simple c program for an serial elbug = electronic morse key.which is to be plugged to the serial port, its output is also a pin in the serial port. Just compile it by 'gcc elbug.c -o elbug' or use the ready-compiled file and copy elbug to user/local/bin. /* Call it as root. */ How to cable your homebrew elbug? Middle pad: +9V battery via Resistor 2k Left contact: -> DCD (9-pin plug: 1) (25-pin plug: 8) Right contact: -> CTS (9-pin plug: 8) (25-pin plug: 5) Ground: -pole battery (9-pin plug: 5) (25-pin plug: 7) /* by Günther Montag , ex- dl4mge now maintained by Patrick Strasser OE6PSE (trapicki) now actual version also at https://github.com/trapicki/elbug */

...Applications designed to Reset, Read Faults and Calibrate the Range Rover P38a/Classic Electronic Air Suspension. Using a custom ODDII(P38a) or Diagnostics(Classic) cable faults can be read and reset. Calibration is also possible.

This is a small implementation of the communication protocol OBEX over a slow, serial cable. It's primary use is to communicate with cellphones, more specifically the SonyEricsson brand phones.

s10sh is a command line software utility to download pictures from Canon digital cameras via a USB or serial cable. It also allows for other direct control of the camera and to explore the embedded processor.

An application to allow communication with Panasonic X70 mobile phones using a reverse-engineered enhanced AT command set. It works in combination with a linux bluetooth stack and should also work with phones connected by USB or serial cable.

LPTransfer is a command line program that sends files through the parallel port, using a standard laplink cable (called also interlink). It's similar to the DOS utility Laplink and Fast Pc Linker.

BPALogin is a replacement for the Telstra supplied client for connecting and using Telstra's Big Pond Advance powered by Cable.