Search Results for "cable"

...Pinguino comes with a USB Bootloader, a small program running inside the microcontroller which is responsible for transferring your application from your PC to the microcontroller memory and handing over the control to this program afterwards. No programmer is then needed, only a USB cable and a PC. Pinguino is also an Integrated Development Environement (IDE) which gives everyone the ability to write, compile and upload programs on a Pinguino board.

THIS PROJECT MIGRATED TO https://gitlab.com/mwetoolkit/mwetoolkit3/ The Multiword Expressions toolkit aids in the automatic identification and extraction of multiword units in running text. These include idioms (kick the bucket), noun compounds (cable car), phrasal verbs (take off, give up), etc. Even though it focuses on multiword expresisons, the framework is quite complete and can also be useful in any corpus-based study in computational linguistics. The mwetoolkit can be applied to virtually any text collection, language, and MWE type. It is a command-line tool written mostly in Python. ...

This is an inteface for the data acquisition cable for the UNI-T (Uni-trend) UT61D multimeter. It supports both USB (using libusb) and RS232 cables. The interface consists of a single C header file.

...Atmel's 89S are programmable via an SPI port and therefore require absolutely no additional components in order to program them in-system. This program requires a standard "Centronics" type PC parallel port (a bidirectional, EPP or ECP port is not required). A 5-way cable is required to connect the microcontroller to the port; wiring information is given in the included manual page. Remember that a clock source is required in order to program the device, and that EA must be tied to Vcc when programming the internal flash memory. Note that since prog89S52 uses ioperm() and friends to access the underlying port hardware, you may need to run it as root. ...

The N8VB vCOM Virtual Serial Port Driver creates pairs of virtual serial ports on your Windows 2000 or XP system that are "virtually" connected together like a null modem cable. It behaves like a Virtual Null Modem Cable.

dvbsnoop - DVB analyzer / MPEG analyzer program to monitor, analyze, debug, dump or view dvb/mpeg/dsm-cc/mhp stream information (TS, PES, SECTION) (e.g. digital television) send via satellite, cable or terrestrial.