Search Results for "chip"

The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.

Another Zilog Z80 emulation. C++ class on a shared library. Simulates all pins of the Z80-Chip in a single function interface. Additionally are some Test-Projects added. 1. CP/M 2.2 emulator connectable by an telnet client. 2. An instruction set examiner. 3. An ZX-80 emulator. 4. An TK-80 emulator 5. An Z80 Dis-assembler driver for all supported instructions.

DRO Magic is a utility that reads files in the DRO version 1 format, and plays through them in DOS on the YM3812 sound chip that came with the Adlib and Soundblaster sound cards. It also works in Dosbox.

This is a tracker-style music editor tool for the Commodore-Plus/4 / Commodore-16 computers' TED-chip. It can also be used on Commodore-64 by emulating the TED-sound, and later generating the native TED music on Plus4 or in VICE/Yape Plus4 emulators... NOTE: I left SourceForge for reasons not ethical to mention here. You can find me and my further work at these locations: http://hermit.sidrip.com http://csdb.dk/scener/?id=18806 https://github.com/hermitsoft/

scmRTOS is tiny Real-Time Preemptive Operating System intended for use with Single-Chip Microcontrollers. scmRTOS is capable to run on small uCs with as little amount of RAM as 512 bytes. The RTOS is written on C++ and supports various platforms.

DOS version: Source code to be compiled with TMTPC 3.9x or higher and TASM 3.x or higher SDL (Win32/Linux) version: Source code to be compiled with FPC 2.6.x or higher, GCC 4.x.x or higher and JWASM 2.xx or higher

Open On-Chip Debug Solution for Embedded Target Systems based primarily on ARM cores. This project has moved to sourceforge: https://sourceforge.net/projects/openocd/

DOS packet driver for Realtek RTL8101 integrated LAN chips. This project is the early development stage. All help is appreciated. Purpose: Create a generic packet driver for DOS to work on the RT8101 RTL8136 and RTL8139 chip-set.

This project contains some test scripts and software for Analog Devices' DSP chip emulators. This verifies whether a particular emulator is working correctly with a particular PC and target board.

PicOload is a programmer and a bootloader that allow to program a PIC 16f87X / 16f87XA using a RS232 serial line whithout leaving the chip from his support and without disturbing the rest of the device

This project implements a reduced instruction set (RISC) CPU in VHDL. It was designed for the Altera Flex10k20 chip, but the VHDL code should port to any compatable chip. The instruction set is extensive, and the design is easily extendable to 16 bits.

The Ogg Vorbis Player (http://www.xiph.org/ogg/vorbis/index.html) shall be implemented in form of a system-on-a-chip by using hardware/software co-design techniques using prototyping board with the open source LEON processor (http://www.gaisler.com).

Develop hardware for universal chip programmer, buildable cheaply by hobbyists - 40-pin programmer to cost under Ł100 (vs. Ł300 for commercial version). Use GunFire for software support.

The MP3elf is a low-cost ethernet connected MP3 player that receives an MP3 stream from a local area network server and delivers it to amplified speakers or a Hi-Fi system. The hardware is based on the ST-013 MP3 decoder chip and a TINI Java SIM

ELCO stands for Embedded Lisp COmpiler or Esdens Lisp COmpiler. The goal is to create a lisp compiler for embedded 32bit architectures. (i.e. ARM) With this compiler you are able to write lisp code on a naked chip. No OS needed.