Search Results for "usb serial data monitor"
Sort By:
Showing 68 open source projects for "usb serial data monitor"
View related business solutions-
Stay productive working at any distance from anywhere with Monitask.
-
Deploy Red Hat Ansible Automation Platform on Microsoft Azure for a strategic automation solution that allows you to orchestrate, govern and operationalize your Azure environment.
-
1
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present... -
2
ScriptCommunicator / serial terminal
Scriptable data terminal which supports several interfaces.
ScriptCommunicator is a scriptable cross-platform data terminal that supports serial port (RS232, USB to serial), UDP, TCP client/server, SPI, I2C, and CAN. All sent and received data can be shown in a console and can be logged in an html and a text log. In addition to the simple sending and receiving of data, ScriptCommunicator has a JavaScript interface. This script interface has the following features: - Scripts can send and receive data with the main interface. - In addition... -
3
simple_serial_protocol
Simple protocol for serial data transfer
Simple protocol for sending minimal length serial messages for devices using RS-232 directly or over USB. Messages are minimized by sending data as raw binary with only symbols 0xFF and 0xFE defined as special. 0xFF is the message start symbol and 0xFE is the escape symbol. Data values 0x00 to 0xFD are sent verbatim. Data value 0xFF is sent as byte pair 0xFE, 0xFD and 0xFE is sent as byte pair 0xFE, 0xFE. Data messages are minimized by maximizing the common knowledge of the sender and receiver... -
4
YAT
Yet Another Terminal :: Serial Communication :: Engineer/Test/Debug
Engineering, testing and debugging of serial communication. Supports RS-232/422/423/485 as well as TCP/IP Client/Server/AutoSocket, UDP/IP Client/Server/PairSocket and USB Ser/HID. Optimized for simple command sets of e.g. embedded systems. -
Take away the pain and hassle associated with applicant recruitment, hiring, and onboarding with ApplicantStack. Designed for HR professionals and recruiters, ApplicantStack helps streamline the recruiting and onboarding processes to improve productivity and reduce costs. ApplicantStack provides a complete toolkit that includes tools for posting, launching, and advertising jobs, assessing and managing candidates, collaborating with teams, centralizing information for quick hiring and onboarding, and more.
-
5
Chromis POS
Chromis POS, the new evolving face for your point of sale needs
Are you looking for POS software for your outlet? Chromis Pos is a feature rich Point of Sale software. Which will run a variety of hardware, the only requirement is that it must be capable of running Java 11 Chromis Pos seperates the till and backoffice functions into individual applications. The latest version includes a number of new features Chromis pos has a small team of people who are always willing to assist with any issues Features -
6
SerialTest
A cross platform debugger for serial port/Bluetooth/TCP/UDP
A versatile test tool running on Windows/Linux/macOS/Android. Works as data transceiver/realtime plotter/shortcut/file transceiver. Supports serial port, Bluetooth SPP client/server, Bluetooth LE client, TCP client/server, UDP. Homepage: https://github.com/wh201906/SerialTest -
7
VitalSignsCapture
Download data from medical device interfaces in ICU & Anaesthesia
A C# .NET app to download or capture data from several medical device interfaces such as Datex AS3 S/5 Anesthesia, Philips Intellivue, GE Dash, Mindray, Spacelabs, Draeger Infinity, Draeger HL7 patient monitors, GE Engstrom, Draeger (Medibus), Maquet (Servo-i & Flow-i), Puritan Bennett ventilators, Covidien BIS Vista cerebral monitor, Fresenius Agilia, Alaris Carefusion, BBraun Spacecom syringe and volumetric pumps, Roche Cobas ASTM ABG analyzers. Requires Visual Studio 2022, .NET 8 or Visual... -
8
q4rescue
A live linux Rescue toolkit/Emergency OS - based on q4os Trinity
A live linux system rescue toolkit based on q4os Trinity available as a bootable iso for administrating, repairing and cloning/restoring your system and data. Main tools: -Foxclone -Rescuezilla -Clonezilla -DDrescue-gui -qtfsarchiver -Apart -Testdisk -Photorec -Boot Repair -WoeUSB -Q4OS imager -UNetbootin -usbimager -Kdirstats -Kdiskmark -Rclone & Rclone BRowser -Reminna -Filezilla -qbittorrent -gohttpserver -chromium -nwipe -ntpw-gui -efibootmgr -zenmap (nmap gui... -
9
Route_Serial_TCP_UDP
Serial <-> TCP/IP, Serial <-> UDP/IP, TCP/IP <-> UDP/IP
ScriptCommunicator (scriptable data terminal) script which routes: - serial port (RS232, USB to serial) <-> TCP/IP (Client/Server) - serial port (RS232, USB to serial) <-> UDP/IP - TCP/IP (Client/Server) <-> UDP/IP ScriptCommunicator can be found here: https://sourceforge.net/projects/scriptcommunicator/ -
Paligo is an end-to-end Component Content Management System (CCMS) solution for technical documentation, policies and procedures, knowledge management, and more.
-
10
weighbridge software
Best Weighbridge Software For All Types Of Weighbridges And Indicators
1.Weighbridge Software Working On Local Area Network(LAN) Weighbridge Software Shall Installed On The Server PC And Shared On LAN Network For Client Access. Network Based Multi Weighbridge Software Works On LAN On LAN Weighbridge Software Can Work On 2 Possible Ways 1.Truck Takes First Weight On Weighbridge 1 and Second Weight On Any Vacant Weighbridge Like Weighbridge 2 or 3 etc Or Many Be 1 itself In This Case Ticket Serial Number Is Common And Accessible To All Weighbridges... -
11
MC 6800 Emulator for Teensy 4
6800 Emulator runs on Teensy 4 processor
6800/ET-3400 Emulator, designed for the Teensy 4.0/4.1 processors. Build this with the Arduino IDE 2.0. Full Source and readme included in archive. Programs written in 6800 assembly can be run in the emulator. It supports two modes of operation, an internal monitor program and a mode that emulates the Heathkit ET3400 (and ET-6800) microprocessor trainers. Motorola released the MC6800 chip in 1974. It was a source of inspiration for the designers of the more popular (and cheaper) 6502 chip... -
12
JYMAG
Management & operating of AT-based (e.g. Sagem) mobile phones/modems
JYMAG (Jig Your Music And Graphics) is a program for communicating with serial-port-based mobile phones. It is a free replacement for the Sagem mobile phone software, 'My Pictures and Sounds', and a general-purpose serial terminal. See the project homepage https://jymag.sourceforge.io and the project Wiki in the menu above. -
13
TermFF
A Serial Terminal Console for development on a remote (Forth) device
As a console terminal, TermFF, with its extensions, connected to a Forth system device can be used as a software development environment. -
14
pFFh
a self-contained development environment for embedded systems.
pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer... -
15
PJON
Experimental, arduino-compatible, multi-master, multi-media network
PJON® (Padded Jittering Operative Network) is an experimental, Arduino-compatible, multi-master, multi-media, software-defined network protocol that can be easily cross-compiled on many microcontrollers and real-time operative systems like ATtiny, ATmega, SAMD, ESP8266, ESP32, STM32, Teensy, Raspberry Pi, Zephyr, Linux, Windows x86, Apple and Android. PJON operates on a wide range of media, data links and existing protocols like PJDL, PJDLR, PJDLS, Serial, RS485, USB, ASK/FSK, LoRa, UDP, TCP... -
16
NATTYA
Communication application for USB to RS-232 connections.
This Python and Tkinter application uses the features of UDEV to automatically identify USB to RS-232 type connections. Connected devices are shown in /dev/serial/by-id as a link to the virtual port. This is used for automatic connection. User settings such as baud rate and line endings associated with the unique ID are stored in a configuration file for future connections. Transmit data may be entered as ASCII or hex by using '#' as an entry mode escape character. Entering '#' will toggle... -
17
g7ctrl
Managing daemon for GM7 Xtreme GPS Tracker
This software, consisting of a daemon and a command shell, is meant to be used together with the Xtreme GM7 GPS tracker to help simplify its management and to make it possible to monitor alerts sent by the tracker. The software is intended to be run as a GNU/Linux service that always runs in the background and can be used to both receive location updates from a remote tracker as well as configuring the tracker (over both USB and a GPRS link to the device). All received events are stored... -
18
ECG Logger Viewer
ECG Logger Viewer is the application software for ECG Logger device.
NEW VERSION 3.2.1.5 - MARS 2022 ECG Logger is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode. The ECG Logger project is aimed for providing a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with two companion boards for the SD card mass-storage and the instrumentation differential... -
19
solaton
Monitor software for the epever solar pv charge controller.
This software is used to extract operational data from the EPEVER Triron solar-PV controller, including its PV power output, battery voltage, load current, device temperatute, etc. Data collection is done in two halves: a client ("solatonclient") that talks to the controller via a serial port and RS-485 adapter, and a server ("solatonserver") that stores the information in files. The "solatonclient" sends information to the "solatonserver" over the network, and because it does not need... -
20
Amazon EC2 System Monitor for macOS
Amazon EC2 System Monitor for macOS is the on instance agent
... Homebrew. The package includes a shell script for enabling, disabling, and listing the current status of the agent according to launched. The Amazon EC2 System Monitor for macOS uses multiple goroutines to manage two primary mechanisms. The serial relay takes data from a UNIX domain socket and writes the data in a payload via a basic wire protocol. Runs a ticker that reads CPU utilization and sends the CPU usage percentage to the UNIX domain socket. -
21
Network activity depends only on the user's settings and is directed only to the addresses written in the monitoring data list of the TXT file. The function of the program is to ping devices, and coloring the rectangles signed with addresses in red or green. We will planning in the future to add an event log, сhoice of graphic icons for the diagram, metadata for each device, make a alarm signal for USB and network devices for warning (siren of flasher light for example), monitor devices working...
-
22
STM32 machine language monitor
Machine language monitor program for the STM32F103C8T6 "Blue Pill"
... can't execute any subroutines in the flash memory. This project requires a serial terminal e.g. on Linux, minicom on a USB serial TTL adapter running at 9600 baud, 8bits, no parity. The usart port on the STM32 is at the other end of this hardware. Using TTL levels is easier that introducing RS-232 levels. The code experiments in read write memory should be subroutines and will be called by this monitor and a return in the user's code will return to this monitor program. -
23
MiniMon
Read and Log CO2, Temperature, and Humidity from a CO2 Monitor Device
MiniMon 1.1 released! MiniMon can now also be used as a device under GeigerLog: https://sourceforge.net/projects/geigerlog/ CO2 Monitor is a small, low-cost (~65€) device, which is advertised as a 'bad-air' monitor for home and office, which it indicates by green, yellow, and red LEDs, and a small numeric LCD display. MiniMon is a simple Python3 program, which can read the data from this device via a USB connection, show them on the computer screen, and log them to disk, including... -
24
PyBitBanger
Python controlled hardware.
... sufficient resources to control a very large number of bits. The Nybble protocol, https://sourceforge.net/projects/nybbler, is used to communicate between Python and and port expander chips. Tkinter is used for both the GUI and as a thread manager for the serial port interface. This makes it possible to have a simple plug and play application. Nattya, https://sourceforge.net/projects/nattya/, a hex friendly TTY interface is used for debug because the Arduino IDE doesn't support hex RS232 data. -
25
ESP32 Arduino Reflow Oven Controller
ESP32 Arduino Based Reflow Oven Controller Schematics and Firmware
...") can be found in <Files/firmware>. The Serial Profile Plotter For Reflow Ovens utility was written to operate in conjunction with this controller. You can download it here: https://sourceforge.net/projects/serial-profile-plotter-reflow/