Re: [Thinstation-general] thinstation and malloc failure

[Mike E. <thi...@gm...>]

On Wed, Aug 24, 2011 at 2:34 PM,  <kar...@se...> wrote:
> Hi,
>
> we have to use the IBM telnet client für iSeries "ibm5250" and most time it
>  works fine with thinstation (2.2.2h).
> But sometimes the client shows "malloc failure" and the requested function
> (keystroke playback) does not work.
>
> The client has lot of memory available but the application cannot use it.
>
> Any ideas to work around this problem?

We are running the most "recent" version of the program (0.17.4) and
the project looks dead. No updates for almost three years.
So there isn't much we (Thinstation) can do.

Have you been running the memory test (from the boot menu) over night
just to make sure your client hasn't bad RAM?

Mike

>
> Karl
>
>
>
> Hans Segmüller, Polstermöbelfabrik GmbH & Co. KG
> Sitz: Münchner Str. 35, 86316 Friedberg
> Kommanditgesellschaft, Amtsgericht Augsburg HRA 3199
>
>
>
> ------------------------------------------------------------------------------
> EMC VNX: the world's simplest storage, starting under $10K
> The only unified storage solution that offers unified management
> Up to 160% more powerful than alternatives and 25% more efficient.
> Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
> _______________________________________________
> Thinstation-general mailing list
> Thi...@li...
> https://lists.sourceforge.net/lists/listinfo/thinstation-general
>
>



-- 
Operator of the Danish TS-O-Matic.
http://thinstation.org
- a light, full featured linux based thin client OS