Re: [Ser2net-devel] [ser2net:discussion] Re: Change Baudrate of seriell Port connected to ser2net with windows program HW VSP

[Corey M. <mi...@ac...>]

I've added the following patch to automatically detect the Cisco style
baud rates.  Patch is attached.

-corey

On 09/16/2014 01:36 AM, Joachim Tork wrote:
>
> Hello Corey,
>
> first of all thanks for your reply.
> To answer your questions,
>
> if I change baudrate on windwos site the baudrate of my /dev/ttyUSB0
> remains the same.
>
> root@rpitc-68a8e12d:/home/pi# stty -a < /dev/ttyUSB0 | head -n 1
> speed 9600 baud; rows 0; columns 0; line = 0;
> root@rpitc-68a8e12d:/home/pi# stty -a < /dev/ttyUSB0 | head -n 1
> speed 9600 baud; rows 0; columns 0; line = 0;
> root@rpitc-68a8e12d:/home/pi# stty -a < /dev/ttyUSB0 | head -n 1
> speed 9600 baud; rows 0; columns 0; line = 0;
> root@rpitc-68a8e12d:/home/pi#
>
> And yes I get gibberish, it is working fine if I don't change speed or
> if I adjust the speed with the control port and setportconfig after
> changing it on windows site.
>
> In the attchachment I have added a screenshot of my windows setup,
> maybe this gives a clearer view.
>
> kind regards
>
> Joachim
>
> ------------------------------------------------------------------------
>
> Change Baudrate of seriell Port connected to ser2net with windows
> program HW VSP
> <https://sourceforge.net/p/ser2net/discussion/90083/thread/3a8d2f91/?limit=25#3f87/aa4a/a318>
>
> ------------------------------------------------------------------------
>
> Sent from sourceforge.net because you indicated interest in
> https://sourceforge.net/p/ser2net/discussion/90083/
> <https://sourceforge.net/p/ser2net/discussion/90083>
>
> To unsubscribe from further messages, please visit
> https://sourceforge.net/auth/subscriptions/
> <https://sourceforge.net/auth/subscriptions>
>