From: Borut R. <bor...@gm...> - 2013-03-29 22:17:00
|
Luis, actually thank YOU, since you found a gputils bug which I fixed right now, see https://sourceforge.net/p/gputils/bugs/262/. Now the original lab2.asm also compiles without errors with gpasm from svn HEAD. Cheers, Borut On 29. 03. 2013 22:56, Luis de Arquer wrote: > Thanks a lot Borut! > > It assembled fine now! :) I only had to comment out the line > > config ICPRT = OFF > > because it was complaining it did not exist such a config bit for the 2455. > > Regards, > > Luis > > On Fri, Mar 29, 2013 at 7:43 PM, Borut Ražem <bor...@gm...> wrote: >> On 29. 03. 2013 19:52, Luis de Arquer wrote: >> >> Thanks for all the responses. >> >> Joel, I have started downloading Microchip libraries, but seeing what >> Sebastien is saying I think I should leave that for now. Thanks anyway >> :) >> >> >> I've got a USB CDC ACM firmware that compiles with latest sdcc, >> I'll see if I can put it up on my webpage this weekend. >> >> That would be great. >> >> >> On Fri, Mar 29, 2013 at 5:32 PM, Borut Ražem <bor...@gm...> wrote: >> >> I'm confused: you tried to compile the c (sdcc) source code with gpasm? >> Probably not. So where the erros came from: sdcc or gpasm? If from >> gpasm: can you send me the generated asm file? >> >> Sorry, you are right, I am mixing things up. The one I tried is a >> lab2.asm port to gpasm that you can find here >> >> http://www.janwagemakers.be/wordpress/?p=102 >> >> (not sure what lab2 is) >> The assembler seems to be finding issues with some macros. >> >> >> See the gputils bug tracker https://sourceforge.net/p/gputils/bugs/188/. >> Attached you'll find the modified version >> https://sourceforge.net/p/gputils/bugs/_discuss/thread/e3d74659/e1fe/attachment/lab2_18F2455.tgz >> which compiles without errors both with MPASM(X) and gpasm. >> >> Good luck, >> Borut >> |