Re: [Playerstage-users] How to install Player from SVN source...

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Thank you for your prompt reply. Thank you so much. :clap:

Yes, I did follow your suggestion and grab the most recent SVN player half
an hour ago (2008-10-28), and tried two ways to build the source:

1) 
cd player-svn
ccmake . 
make
I got the errors as

[ 85%] Building CXX object
examples/libplayerc++/CMakeFiles/example1.dir/example1.o
/home/jiapei/Tools/playerstagegazebo/player-svn/examples/libplayerc++/example1.cc:2:28:
error: boost/signal.hpp: No such file or directory
/home/jiapei/Tools/playerstagegazebo/player-svn/examples/libplayerc++/example1.cc:3:26:
error: boost/bind.hpp: No such file or directory
/home/jiapei/Tools/playerstagegazebo/player-svn/examples/libplayerc++/example1.cc:
In function ‘int main(int, char**)’:
/home/jiapei/Tools/playerstagegazebo/player-svn/examples/libplayerc++/example1.cc:72:
error: ‘bind’ is not a member of ‘boost’
/home/jiapei/Tools/playerstagegazebo/player-svn/examples/libplayerc++/example1.cc:78:
error: ‘bind’ is not a member of ‘boost’
/home/jiapei/Tools/playerstagegazebo/player-svn/examples/libplayerc++/example1.cc:78:
error: ‘ref’ is not a member of ‘boost’
/home/jiapei/Tools/playerstagegazebo/player-svn/examples/libplayerc++/example1.cc:79:
error: ‘bind’ is not a member of ‘boost’
/home/jiapei/Tools/playerstagegazebo/player-svn/examples/libplayerc++/example1.cc:79:
error: ‘ref’ is not a member of ‘boost’
/home/jiapei/Tools/playerstagegazebo/player-svn/examples/libplayerc++/example1.cc:105:
error: ‘bind’ is not a member of ‘boost’
make[2]: *** [examples/libplayerc++/CMakeFiles/example1.dir/example1.o]
Error 1
make[1]: *** [examples/libplayerc++/CMakeFiles/example1.dir/all] Error 2
make: *** [all] Error 2

But, during "ccmake ." step, what I've got in the advanced mode "t" is

 Boost_INCLUDE_DIR                /usr/local/include/boost-1_36
 Boost_LIBRARY_DIRS               /usr/local/lib
 Boost_SIGNALS_LIBRARY           
/usr/local/lib/libboost_signals-gcc42-mt-1_36.so
 Boost_SIGNALS_LIBRARY_DEBUG      Boost_SIGNALS_LIBRARY_DEBUG-NOTFOUND
 Boost_SIGNALS_LIBRARY_RELEASE   
/usr/local/lib/libboost_signals-gcc42-mt-1_36.so
 Boost_THREAD_LIBRARY            
/usr/local/lib/libboost_thread-gcc42-mt-1_36.so
 Boost_THREAD_LIBRARY_DEBUG       Boost_THREAD_LIBRARY_DEBUG-NOTFOUND
 Boost_THREAD_LIBRARY_RELEASE    
/usr/local/lib/libboost_thread-gcc42-mt-1_36.so

2) 
cd player-svn
cmake .

What I've got is

-- ----- Processing driver make files -----
-- checking for module 'artoolkitplus'
--   package 'artoolkitplus' not found
-- checking for module 'libgarcia'
--   package 'libgarcia' not found
-- checking for module 'flexiport'
--   package 'flexiport' not found
-- checking for module 'GbxSickAcfr'
--   package 'GbxSickAcfr' not found
-- checking for module 'hokuyo_aist'
--   package 'hokuyo_aist' not found
-- ----- Done -----

and 

-- ----- Processing driver make files -----
-- checking for module 'artoolkitplus'
--   package 'artoolkitplus' not found
-- checking for module 'libgarcia'
--   package 'libgarcia' not found
-- checking for module 'flexiport'
--   package 'flexiport' not found
-- checking for module 'GbxSickAcfr'
--   package 'GbxSickAcfr' not found
-- checking for module 'hokuyo_aist'
--   package 'hokuyo_aist' not found
-- ----- Done -----

Although I've already successfully installed "artoolkitplus" under
/usr/local, with head files in 
/usr/local/include/ARToolKitPlus and libraries under /usr/local/lib, 
I still get the error
-- checking for module 'artoolkitplus'
--   package 'artoolkitplus' not found

It's pretty strange to always have such configuration problems.

BTW, I'm using Ubuntu 8.04 and cmake 2.6

jiapei@jiapei-laptop:~/Tools/playerstagegazebo/player-svn$ uname -a
Linux jiapei-laptop 2.6.24-21-generic #1 SMP Tue Oct 21 23:43:45 UTC 2008
i686 GNU/Linux
jiapei@jiapei-laptop:~/Tools/playerstagegazebo/player-svn$ cmake --version
cmake version 2.6-patch 2

Really can't figure it out till now.

Regards
JIA

gbiggs wrote:
> 
> None of the items in CMake_Todo.txt are major or will prevent Player
> from compiling correctly.
> 
> I suggest you perform a clean checkout of svn, then follow the
> instructions in the README and INSTALL files.
> 
> Geoff
> 
> jiapei100 wrote:
>> 
>> 
>> Yup, you are totally right.
>> 
>> After I configured by "ccmake ." and then "make"
>> 
>> I got the following errors.
>> 
>> So, can you help to expain why it is so? I did find there is a
>> CMake_Todo.txt file, which seems to summarize the defects of the current
>> version of player. I doubt that the current SVN version is really able to
>> be
>> correctly compiled.
>> 
>> Any suggestions?
>> 
>> 
>> Best Regards
>> JIA
>> 
>> 
>> Assembler messages:
>> Fatal error: can't create CMakeFiles/playererror.dir/error.o: No such
>> file
>> or directory
>> make[2]: *** [libplayercore/CMakeFiles/playererror.dir/error.o] Error 1
>> make[1]: *** [libplayercore/CMakeFiles/playererror.dir/all] Error 2
>> make: *** [all] Error 2
>> 
>> 
>> 
>> 
>> 
>> gbiggs wrote:
>>> That output is from the old autotools configure script. If you're using
>>> Player SVN trunk, then you shouldn't be able to get that at all, as the
>>> autotools scripts have been completely removed. Is your check out of
>>> trunk clean, or are you actually using the Player 2.1 branch (which is
>>> still using autotools). There are instructions in the wiki on how to
>>> build the trunk version of Player.
>>>
>>> To answer your question, those are the drivers that it won't build
>>> because one or more requirements are not met. Unless you need one of
>>> those drivers, you don't have to do anything. If you do need one of
>>> them, you should fix the dependency of it, then re-run configure.
>>>
>>> Geoff
>>>
>>> jiapei100 wrote:
>>>> It seems the current player SVN is based on cmake, right?
>>>>
>>>> After a feasible configuration, what I've got is:
>>>>
>>>>
>>>> The following device drivers will NOT be included:
>>>> - alsa -- disabled by default; use --enable-alsa to enable
>>>> - amtecM5 -- couldn't find (at least one of) Device.h
>>>> - artoolkitplus -- couldn't find required package artoolkitplus >= 2.1
>>>> - chatterbox -- disabled by default; use --enable-chatterbox to enable
>>>> - garcia -- disabled by default; use --enable-garcia to enable
>>>> - gbxsickacfr -- disabled by default; use --enable-gbxsickacfr to
>>>> enable
>>>> - isense -- couldn't find (at least one of) isense/isense.h
>>>> - lasertoranger -- disabled by default; use --enable-lasertoranger to
>>>> enable
>>>> - lifomcom -- disabled by default; use --enable-lifomcom to enable
>>>> - linuxwifi -- couldn't find (at least one of) linux/wireless.h
>>>> - mixer -- disabled by default; use --enable-mixer to enable
>>>> - nomad -- disabled by default; use --enable-nomad to enable
>>>> - phidgetRFID -- couldn't find (at least one of) phidget.h
>>>> - phidgetIFK -- couldn't find (at least one of) phidget.h
>>>> - rcore_xbridge -- couldn't find (at least one of) libparticle.h
>>>> - reb -- disabled by default; use --enable-reb to enable
>>>> - robotino -- couldn't find (at least one of) robotinocom.h xtimer.h
>>>> xthread.h
>>>> - segwayrmp -- disabled by default; use --enable-segwayrmp to enable
>>>> - service_adv_mdns -- disabled by default; use
>>>> --enable-service_adv_mdns
>>>> to
>>>> enable
>>>> - sphinx2 -- disabled by default; use --enable-sphinx2 to enable
>>>> - sonartoranger -- disabled by default; use --enable-sonartoranger to
>>>> enable
>>>> - sr3000 -- couldn't find (at least one of) libusbSR.h
>>>> - urg_nz -- disabled by default; use --enable-urg_nz to enable
>>>>
>>>>
>>>>  Anybody help to explain what's happening here? and what should I do to
>>>> remove those "couldn't" in the above?
>>>
>>> -------------------------------------------------------------------------
>>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>>> challenge
>>> Build the coolest Linux based applications with Moblin SDK & win great
>>> prizes
>>> Grand prize is a trip for two to an Open Source event anywhere in the
>>> world
>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>>> _______________________________________________
>>> Playerstage-users mailing list
>>> Pla...@li...
>>> https://lists.sourceforge.net/lists/listinfo/playerstage-users
>>>
>>>
>> 
>> 
>> -----
>> Welcome to Vision Open
>> http://www.visionopen.com http://www.visionopen.com 
>> 
> 
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the
> world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Playerstage-users mailing list
> Pla...@li...
> https://lists.sourceforge.net/lists/listinfo/playerstage-users
> 
> 

-----
Welcome to Vision Open
http://www.visionopen.com http://www.visionopen.com 

-- 
View this message in context: http://www.nabble.com/How-to-install-Player-from-SVN-source...-tp20199849p20200528.html
Sent from the playerstage-users mailing list archive at Nabble.com.