Menu
▾
▴
[PanoTools-devel] Problems with automake/autoconf under Debian sid
|
From: Florent B. <fb...@bi...> - 2005-01-02 10:53:36
|
Hello,
I've some problems while trying to configure then make libpano 2.7.0.8.
The "./configure" work fine (just a little warning), but the make fails.
I've found a way to "fix" it:
=2E/configure
sed -e 's/-I\/usr\/include\/linux //' config.status > config.tmp && cat=20
config.tmp > config.status && rm config.tmp
=2E/config.status
make
Sed's command replace the line=20
s,@JAVA_FLAGS@,-I/usr/include -I/usr/include/linux -DHasJava,;t t
by the line
s,@JAVA_FLAGS@,-I/usr/include -DHasJava,;t t
in config.status.
I don't think it's a good way to do, but it's the only way that I've found =
for=20
now.
I've the same problem with the cvs version.
Here is my "./configure" and "make" (without the "fix"):
florent@jupiter:~/debiandev/libpano12-2.7.0.8$ ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... g77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether g77 accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... =
yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... =
yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... =
yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for g77 option to produce PIC... -fPIC
checking if g77 PIC flag -fPIC works... yes
checking if g77 supports -c -o file.o... yes
checking whether the g77 linker (/usr/bin/ld) supports shared libraries... =
yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for JAVA installation at ...
configure: java home set to /usr
checking jni.h usability... no
checking jni.h presence... yes
configure: WARNING: jni.h: present but cannot be compiled
configure: WARNING: jni.h: check for missing prerequisite headers?
configure: WARNING: jni.h: see the Autoconf documentation
configure: WARNING: jni.h: section "Present But Cannot Be Compiled"
configure: WARNING: jni.h: proceeding with the preprocessor's result
configure: WARNING: jni.h: in the future, the compiler will take precedence
configure: WARNING: ## --------------------------------- ##
configure: WARNING: ## Report this to BUG-REPORT-ADDRESS ##
configure: WARNING: ## --------------------------------- ##
checking for jni.h... yes
checking if JAVA package is complete... yes
checking for ZLIB support ...
configure: zlib home set to /usr
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for inflate in -lz... yes
checking if ZLIB package is complete... yes
checking for PNG support ...
configure: png home set to /usr
checking png.h usability... yes
checking png.h presence... yes
checking for png.h... yes
checking for png_get_io_ptr in -lpng... yes
checking if PNG package is complete... yes
checking for JPEG support ...
configure: jpeg home set to /usr
checking jpeglib.h usability... yes
checking jpeglib.h presence... yes
checking for jpeglib.h... yes
checking for jpeg_read_header in -ljpeg... yes
checking for JPEG library is version 6b or later... yes
checking if JPEG package is complete... yes
checking for TIFF support ...
configure: tiff home set to /usr
checking tiff.h usability... yes
checking tiff.h presence... yes
checking for tiff.h... yes
checking for TIFFOpen in -ltiff... yes
checking if TIFF package is complete... yes
checking for ANSI C header files... (cached) yes
checking float.h usability... yes
checking float.h presence... yes
checking for float.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking for size_t... yes
checking for working volatile... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for working memcmp... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for floor... no
checking for memset... yes
checking for pow... no
checking for setlocale... yes
checking for sqrt... no
checking for strrchr... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating tools/Makefile
config.status: creating m4/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
libpano is configured as follows. Please verify that this configuration
matches your expectations.
Host system type : i686-pc-linux-gnu
Option Value
=2D------------------------------------------------------------------------
Shared libraries --enable-shared=3Dyes
Static libraries --enable-static=3Dyes
JPEG --with-jpeg=3D have_jpeg =3D yes
PNG --with-png=3D have_png =3D yes
TIFF --with-tiff=3D have_tiff =3D yes
ZLIB --with-zlib=3D have_zlib =3D yes
JAVA --with-java=3D have_java =3D yes
Options used to compile and link:
PREFIX =3D /usr
VERSION =3D 2.7.0.8
CC =3D gcc
CFLAGS =3D -g -O2
CPPFLAGS =3D
DEFS =3D -DHAVE_CONFIG_H
LDFLAGS =3D
LIBS =3D
CXX =3D g++
CXXFLAGS =3D -g -O2
JPEG_FLAGS =3D -I/usr/include -DHasJPEG
LIB_JPEG =3D -L/usr/lib -ljpeg
PNG_FLAGS =3D -I/usr/include -DHasPNG
LIB_PNG =3D -L/usr/lib -lpng
TIFF_FLAGS =3D -I/usr/include -DHasTIFF
LIB_TIFF =3D -L/usr/lib -ltiff
ZLIB_FLAGS =3D -I/usr/include -DHasZLIB
LIB_ZLIB =3D -L/usr/lib -lz
JAVA_FLAGS =3D -I/usr/include -I/usr/include/linux -DHasJava
florent@jupiter:~/debiandev/libpano12-2.7.0.8$ make
make all-recursive
make[1]: Entering directory `/home/florent/debiandev/libpano12-2.7.0.8'
Making all in m4
make[2]: Entering directory `/home/florent/debiandev/libpano12-2.7.0.8/m4'
make[2]: Rien =E0 faire pour =AB all =BB.
make[2]: Leaving directory `/home/florent/debiandev/libpano12-2.7.0.8/m4'
Making all in .
make[2]: Entering directory `/home/florent/debiandev/libpano12-2.7.0.8'
if /bin/sh ./libtool --mode=3Dcompile gcc -DHAVE_CONFIG_H -I. -I. -I. =20
=2DI/usr/include -I/usr/include/linux -DHasJava -I/usr/include -DHasJPEG=20
=2DI/usr/include -DHasPNG -I/usr/include -DHasTIFF -I/usr/include -DHasZLIB=
=20
=2DD__Ansi__=3D1 -g -O2 -MT filter.lo -MD -MP -MF ".deps/filter.Tpo" -c =
=2Do=20
filter.lo filter.c; \
then mv -f ".deps/filter.Tpo" ".deps/filter.Plo"; else rm -f=20
".deps/filter.Tpo"; exit 1; fi
mkdir .libs
gcc -DHAVE_CONFIG_H -I. -I. -I. -I/usr/include -I/usr/include/linux -DHasJ=
ava=20
=2DI/usr/include -DHasJPEG -I/usr/include -DHasPNG -I/usr/include -DHasTIFF=
=20
=2DI/usr/include -DHasZLIB -D__Ansi__=3D1 -g -O2 -MT filter.lo -MD -MP=20
=2DMF .deps/filter.Tpo -c filter.c -fPIC -DPIC -o .libs/filter.o
In file included from /usr/include/_G_config.h:44,
from /usr/include/libio.h:32,
from /usr/include/stdio.h:72,
from filter.h:25,
from filter.c:23:
/usr/include/gconv.h:72: error: parse error before "size_t"
/usr/include/gconv.h:88: error: parse error before "size_t"
/usr/include/gconv.h:97: error: parse error before "size_t"
/usr/include/gconv.h:174: error: parse error before "size_t"
/usr/include/gconv.h:177: error: parse error before '}' token
In file included from /usr/include/libio.h:32,
from /usr/include/stdio.h:72,
from filter.h:25,
from filter.c:23:
/usr/include/_G_config.h:47: error: field `__cd' has incomplete type
/usr/include/_G_config.h:50: error: field `__cd' has incomplete type
In file included from /usr/include/stdio.h:72,
from filter.h:25,
from filter.c:23:
/usr/include/libio.h:351: error: parse error before "size_t"
/usr/include/libio.h:360: error: parse error before "size_t"
/usr/include/libio.h:468: error: parse error before "_IO_sgetn"
/usr/include/libio.h:468: error: parse error before "size_t"
In file included from filter.h:25,
from filter.c:23:
/usr/include/stdio.h:302: error: parse error before "size_t"
/usr/include/stdio.h:309: error: parse error before "size_t"
/usr/include/stdio.h:351: error: parse error before "size_t"
/usr/include/stdio.h:355: error: parse error before "size_t"
/usr/include/stdio.h:603: error: parse error before "fread"
/usr/include/stdio.h:603: error: parse error before "size_t"
/usr/include/stdio.h:609: error: parse error before "fwrite"
/usr/include/stdio.h:609: error: parse error before "size_t"
/usr/include/stdio.h:631: error: parse error before "fread_unlocked"
/usr/include/stdio.h:631: error: parse error before "size_t"
/usr/include/stdio.h:633: error: parse error before "fwrite_unlocked"
/usr/include/stdio.h:633: error: parse error before "size_t"
In file included from filter.h:28,
from filter.c:23:
/usr/include/stdlib.h:137: error: parse error before "__ctype_get_mb_cur_ma=
x"
In file included from /usr/include/sys/types.h:266,
from /usr/include/stdlib.h:416,
from filter.h:28,
from filter.c:23:
/usr/include/bits/pthreadtypes.h:50: error: parse error before "size_t"
/usr/include/bits/pthreadtypes.h:53: error: parse error before "__stacksize"
In file included from filter.h:28,
from filter.c:23:
/usr/include/stdlib.h:433: error: parse error before "size_t"
/usr/include/stdlib.h:462: error: parse error before "size_t"
/usr/include/stdlib.h:556: error: parse error before "__size"
/usr/include/stdlib.h:558: error: parse error before "__nmemb"
/usr/include/stdlib.h:567: error: parse error before "size_t"
In file included from /usr/include/stdlib.h:578,
from filter.h:28,
from filter.c:23:
/usr/include/alloca.h:33: error: parse error before "__size"
In file included from filter.h:28,
from filter.c:23:
/usr/include/stdlib.h:583: error: parse error before "__size"
/usr/include/stdlib.h:739: error: parse error before "size_t"
/usr/include/stdlib.h:743: error: parse error before "size_t"
/usr/include/stdlib.h:812: error: parse error before "size_t"
/usr/include/stdlib.h:815: error: parse error before "size_t"
/usr/include/stdlib.h:819: error: parse error before "size_t"
/usr/include/stdlib.h:822: error: parse error before "size_t"
/usr/include/stdlib.h:830: error: parse error before "size_t"
/usr/include/stdlib.h:833: error: parse error before '*' token
/usr/include/stdlib.h:837: error: parse error before "wchar_t"
/usr/include/stdlib.h:841: error: parse error before "mbstowcs"
/usr/include/stdlib.h:841: error: parse error before '*'=20
/usr/include/stdlib.h:844: error: parse error before "wcstombs"
/usr/include/stdlib.h:845: error: parse error before '*' token
filter.c: In function `ThreeToFourBPP':
filter.c:640: error: `UCHAR_MAX' undeclared (first use in this function)
filter.c:640: error: (Each undeclared identifier is reported only once
filter.c:640: error: for each function it appears in.)
filter.c:653: error: `USHRT_MAX' undeclared (first use in this function)
filter.c: At top level:
/usr/include/gconv.h:176: warning: array `__data' assumed to have one eleme=
nt
make[2]: *** [filter.lo] Erreur 1
make[2]: Leaving directory `/home/florent/debiandev/libpano12-2.7.0.8'
make[1]: *** [all-recursive] Erreur 1
make[1]: Leaving directory `/home/florent/debiandev/libpano12-2.7.0.8'
make: *** [all] Erreur 2
Just a last little question : are the users supposed to use makefile.someth=
ing=20
or ./configure && make && make install to build libpano (it's very importan=
t=20
for me, because I want to make a Debian package of libpano, and I don't wan=
t=20
to use a deprecated way to build the package) ?
Thanks.
=2D-=20
=46lorent
P.S. I'm french, so please excuse me if I don't speak english very well.
|