Re: [Netdisco] Passport-8110 ports not numbered correctly

[David P. <dpi...@dn...>]

It appears the fix has busted the Passport-1150 though.  The ports on
the 1150 where correct previously, but now they are numbered like this:
0.17, 0.18, 0.33, 0.34, 0.49, 0.50, 0.51, 0.52, 4.2, description Slot 1,
Port 1, Slot 1, Port 2, Slot 2, Port 1, Slot 2, Port 2, Slot 3, Port 1,
Slot 3, Port 2, Slot 3, Port 3, Slot 3, Port 4, and <blank>
respectively.  

On Thu, 2006-09-28 at 23:23 -0400, Eric Miller wrote:

> This was a bug in the Passport class, fix has been committed to CVS.
> 
> Eric Miller wrote:
> > This may be a bug in the Passport class.
> > 
> > What version of SNMP::Info are you using?
> > 
> > Can you send me (off-list) a snmp walk of the interfaces for the
> > problem device?
> > 
> > Thanks,
> > Eric
> > 
> > Quoting David Pinkoski <dpi...@dn...>:
> > 
> >> We have one Nortel Passport-8110 and the ports are not number correctly
> >> by netdisco.  The strange thing is, that the devices connected to it,
> >> show the proper port.  For example, a switch connected to this device
> >> shows that the passport port used is 7.33.  Which is correct, slot 7
> >> port 33(the fiber port).  But when you view the Passport and look at the
> >> ports, the connected device shows it is on port 9.1 port description
> >> Slot 2, Port 17.  The passport ports are number from 4.1 to...  What
> >> happened to 1.1?
> >>
> >> Anyway, a Passport-8610 is numbered just fine.
> >>
> >> Is this a mib problem?
> >> I also get this error when I do a refresh on the Passport-8110.
> >> Use of uninitialized value in hash element
> >> at /usr/lib/perl5/site_perl/5.8.5/SNMP/Info/Layer3/Passport.pm line 211.
>