From: alex d. <da...@gm...> - 2015-07-24 12:19:01
|
Hi there ! Congrats for this amazing software ;-) I have a Raspberry Pi Camera NoIR installed, and I have configured motion to save (with a event_gap of 10 minutes) the first photo of the motion event (with the output_pictures = first attribute), and then with the on_event_start, send that picture through email. But this picture is taken from the stream, that is configured to 1024x578. I'd like when that even is triggered to take a still picture with more resolution (since the camera goes up to 2592 x 1944. So, using the on_event_start command ... how can I (through console) take a picture with full resolution of that moment ? I tried with: *raspistill -w 2592 -h 1944 -o /tmp/still.jpg* But I got: *mmal: mmal_vc_component_enable: failed to enable component: ENOSPCmmal: camera component couldn't be enabledmmal: main: Failed to create camera componentmmal: Failed to run camera app. Please check for firmware updates* I don't know if it's maybe "motion" takes control and can't do that way. Do I have to stop motion, take still and start motion again ? If yes, what is the best way to do it ? Thank you -- Alex Dantart http://dantart.es http://uptimiza.com If you want to print this email, please, click here before <http://t.sidekickopen14.com/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XZs5vfRYYVQBvXW3LyyX-Vd_V9H56dJ9Pf5-JP-802?t=https%3A%2F%2Fwww.google.com%2Fsearch%3Fq%3Ddeforestation%26hl%3Den%26prmd%3Dimvnsb%26source%3Dlnms%26tbm%3Disch%26ei%3DkkDvTpCnJIjm-ga50NiJAg%26sa%3DX%26oi%3Dmode_link%26ct%3Dmode%26cd%3D2%26ved%3D0CBUQ_AUoAQ%26biw%3D1280%26bih%3D952%23hl%3Den%26tbm%3Disch%26sa%3D1%26q%3Ddeforestation%26pbx%3D1%26oq%3Ddeforestation%26aq%3Df%26aqi%3Dg10%26aql%3D%26gs_sm%3De%26gs_upl%3D74829l75066l0l75130l4l3l0l1l1l0l196l196l0.1l1l0%26bav%3Don.2%2Cor.r_gc.r_pw.r_cp.%2Ccf.osb%26fp%3D531ea00e3ebe35f9%26biw%3D1280%26bih%3D952&si=5944588326404096&pi=02698d64-a8f8-44a0-f24d-2706dc371172> do it |