Re: [Motion-user] motion monitoring 2 Logitech webcams

[Kinney B. <bau...@ap...>]

> Hi there!
>
> I try to use 2 Logiteck Quickcam Pro 4000 webcams with motion 3.2.9-7
> (Debian Lenny version) on a server.
>
> Both cameras are using the same v2 USB hub:
>
> -----------------------------------------------------------------
> user@server:~$ lsusb
> Bus 001 Device 005: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000
> Bus 001 Device 004: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000
> Bus 001 Device 003: ID 1058:0704 Western Digital Technologies, Inc.
> Passport External HDD
> Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
> user@server:~$ lsmod | grep usbcore
> usbcore  139504  6 snd_usb_audio,pwc,snd_usb_lib,usb_storage,ehci_hcd
> -----------------------------------------------------------------
>
> and the driver recognizes them correctly:
>
> -----------------------------------------------------------------
> user@server:~$ dmesg | grep pwc
> [    9.240000] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
> [    9.240000] pwc: Registered as /dev/video0.
> [    9.560000] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
> [    9.560000] pwc: Registered as /dev/video1.
> -----------------------------------------------------------------
>
> Each camera for its own works perfectly, but with both cameras there are
> only images from one cam.
>
> I have the config files motion.conf, thread1.conf and thread2.conf, 2
> webcam servers should be started (8081 and 8082), but only one gets up:
> -----------------------------------------------------------------
>
> I can't figure out what is going wrong here. Could you help me, please?

Did you define the "videodevice"s to be "/dev/video0" and "/dev/video1" in their 
respective thread*.conf files?

-- 

Kinney