From: legus49 <le...@fr...> - 2008-07-31 16:02:12
|
HI, I changed my config from linux Suse10 tu Ubuntu 8.04 and installed precompiled motion 3.2.9, using a LMLBT4 inputs card with a B878. The pictures from my CCD cameras are displayed with lines as if itwasn't the right norm. Any idea ? (on the following file, I'm only usingone input on the card) Thanks for your help [0] Processing thread 0 - config file motion.conf [0] Motion 3.2.9 Started [0] ffmpeg LIBAVCODEC_BUILD 3352064 LIBAVFORMAT_BUILD 3344896 [0] Thread 1 is from motion.conf [1] Thread 1 started [1] cap.driver: "bttv" [1] cap.card: "BT878 video (LMLBT4)" [1] cap.bus_info: "PCI:0000:02:07.0" [1] cap.capabilities=0x05000015 [1] - VIDEO_CAPTURE [1] - VIDEO_OVERLAY [1] - VBI_CAPTURE [1] - READWRITE [1] - STREAMING [1] Supported palettes: [1] 0: GREY (8 bpp, gray) [1] 1: HI24 (8 bpp, dithered color) [1] 2: RGBO (15 bpp RGB, le) [1] 3: RGBQ (15 bpp RGB, be) [1] 4: RGBP (16 bpp RGB, le) [1] 5: RGBR (16 bpp RGB, be) [1] 6: BGR3 (24 bpp RGB, le) [1] 7: BGR4 (32 bpp RGB, le) [1] 8: RGB4 (32 bpp RGB, be) [1] 9: YUYV (4:2:2, packed, YUYV) [1] 10: YUYV (4:2:2, packed, YUYV) [1] 11: UYVY (4:2:2, packed, UYVY) [1] 12: 422P (4:2:2, planar, Y-Cb-Cr) [1] 13: YU12 (4:2:0, planar, Y-Cb-Cr) [1] 14: YV12 (4:2:0, planar, Y-Cr-Cb) [1] 15: 411P (4:1:1, planar, Y-Cb-Cr) [1] 16: YUV9 (4:1:0, planar, Y-Cb-Cr) [1] 17: YVU9 (4:1:0, planar, Y-Cr-Cb) [1] Test palette YU12 (352x288) [1] Using palette YU12 (352x288) bytesperlines 352 sizeimage 152064 colorspace 00000000 [1] found control 0x00980900, "Brightness", range 0,65535 [1] "Brightness", default 32768, current 32767 [1] found control 0x00980901, "Contrast", range 0,65535 [1] "Contrast", default 32768, current 32768 [1] found control 0x00980902, "Saturation", range 0,65535 [1] "Saturation", default 32768, current 32768 [1] found control 0x00980903, "Hue", range 0,65535 [1] "Hue", default 32768, current 32768 [1] found control 0x00000000, "42", range 0,0 !DISABLED! [1] "42", default 0, current 32768 [1] found control 0x00000000, "42", range 0,0 !DISABLED! [1] "42", default 0, current 32768 [1] found control 0x00000000, "42", range 0,0 !DISABLED! [1] "42", default 0, current 32768 [1] found control 0x00000000, "42", range 0,0 !DISABLED! [1] "42", default 0, current 32768 [1] found control 0x00000000, "42", range 0,0 !DISABLED! [1] "42", default 0, current 32768 [1] found control 0x00000000, "42", range 0,0 !DISABLED! [1] "42", default 0, current 32768 [1] found control 0x08000000, "chroma agc", range 0,1 [1] "chroma agc", default 0, current 0 [1] found control 0x08000001, "combfilter", range 0,1 [1] "combfilter", default 0, current 0 [1] mmap information: [1] frames=4 [1] 0 length=155648 [1] 1 length=155648 [1] 2 length=155648 [1] 3 length=155648 [1] Using V4L2 [1] setting control "Brightness" to 32767 (ret 0 ) [0] motion-httpd/3.2.9 running, accepting connections [0] motion-httpd: waiting for data on port TCP 8080 [1] Started stream webcam server in port 8081 |