From: tommy <il...@gm...> - 2005-02-20 23:15:14
|
Hubert Faulhaber schrieb: >Hello to all! > >I'm trying to get my stir4200 usb dongle working. Unfortunately I can't get a connection. > > i've the same device (stir4200) and tried to connect to my mobile phone (siemens cx65 or nokia 8210) and its the same problem ... i can't get a connection to any of the devices, neither by ircomm, nor by obex. i also verified that this does work under win2k, so its not the fault of the dongle. i also have suceeded to get a connection between linux w/ actisys dongle and my nokia 8210, but this was back in the 2.4 days (~ 2.4.10 or something). atm i also do use kernel 2.6.10 (-cko3) and irda-utils 0.9.16 perhaps i try kernel 2.4 sometime ... if you find a solution plz let me know ;) -tom >What I've done so far: > >- compiled necessary kernel modules >- plugged dongle in, module "irda" and "stir4200" are loaded automatically >- loaded module "ircomm" and "ircomm_tty", also loaded "sir_dev" and "irtty_sir" sometimes >- run "irattach irda0 -s" (since irattach /dev/ttySX doesn't work) > >Output of /proc/net/irda/irlap: > >irlap0 state: LAP_NDM > device name: irda0, hardware name: usb#4 > caddr: 0x34, saddr: 0xd0515c32, daddr: 0x397dc41c > win size: 0, win: 0, line capacity: 0, bytes left: 0 > tx queue len: 0 win queue len: 0 rbusy: FALSE mbusy: FALSE > retrans: 3 vs: 0 vr: 0 va: 0 > qos bps maxtt dsize winsize addbofs mintt ldisc comp > tx 9600 0 64 1 12 0 0 > rx 57600 500 2048 7 0 1000 12 > > >Then I put my palm device (Palm m100) in reach and tried several palm programs, mostly just "dlpsh -p /dev/ircomm0". > >Output of irdadump: > >2:34:17.816733 xid:cmd d0515c32 > ffffffff S=6 s=* hubsi hint=8404 [ Computer IrCOMM ] (22) >12:34:18.449497 xid:cmd ffffffff < 285d4967 S=6 s=0 (14) >12:34:18.599466 xid:cmd ffffffff < 285d4967 S=6 s=1 (14) >12:34:18.599611 xid:rsp d0515c32 > 285d4967 S=6 s=1 hubsi hint=8404 [ Computer IrCOMM ] (22) >12:34:18.749464 xid:cmd ffffffff < 285d4967 S=6 s=2 (14) >12:34:18.899431 xid:cmd ffffffff < 285d4967 S=6 s=3 (14) >12:34:19.049394 xid:cmd ffffffff < 285d4967 S=6 s=4 (14) >12:34:19.199368 xid:cmd ffffffff < 285d4967 S=6 s=5 (14) >12:34:19.359344 xid:cmd ffffffff < 285d4967 S=6 s=* IrCOMM hint=8204 [ PDA/Palmtop IrCOMM ] (23) >12:34:20.216352 xid:cmd d0515c32 > ffffffff S=6 s=0 (14) >12:34:20.319326 xid:cmd d0515c32 > ffffffff S=6 s=1 (14) >12:34:20.419325 xid:cmd d0515c32 > ffffffff S=6 s=2 (14) >12:34:20.519289 xid:cmd d0515c32 > ffffffff S=6 s=3 (14) >12:34:20.619285 xid:cmd d0515c32 > ffffffff S=6 s=4 (14) >12:34:20.719262 xid:cmd d0515c32 > ffffffff S=6 s=5 (14) >12:34:20.819244 xid:cmd d0515c32 > ffffffff S=6 s=* hubsi hint=8404 [ Computer IrCOMM ] (22) >12:34:20.820079 snrm:cmd ca=fe pf=1 d0515c32 > 285d4967 new-ca=34 > LAP QoS: Baud Rate=57600bps Max Turn Time=500ms Data Size=2048B Window Size=7 Add BOFS=0 Min Turn Time=1000us Link Disc=12s (32) >12:34:21.351180 snrm:cmd ca=fe pf=1 d0515c32 > 285d4967 new-ca=34 > LAP QoS: Baud Rate=57600bps Max Turn Time=500ms Data Size=2048B Window Size=7 Add BOFS=0 Min Turn Time=1000us Link Disc=12s (32) >12:34:21.875103 snrm:cmd ca=fe pf=1 d0515c32 > 285d4967 new-ca=34 > LAP QoS: Baud Rate=57600bps Max Turn Time=500ms Data Size=2048B Window Size=7 Add BOFS=0 Min Turn Time=1000us Link Disc=12s (32) >12:34:22.413023 snrm:cmd ca=fe pf=1 d0515c32 > 285d4967 new-ca=34 > LAP QoS: Baud Rate=57600bps Max Turn Time=500ms Data Size=2048B Window Size=7 Add BOFS=0 Min Turn Time=1000us Link Disc=12s (32) >12:34:23.049725 xid:cmd ffffffff < 285d4967 S=6 s=0 (14) >12:34:23.199701 xid:cmd ffffffff < 285d4967 S=6 s=1 (14) >12:34:23.349660 xid:cmd ffffffff < 285d4967 S=6 s=2 (14) >12:34:23.499634 xid:cmd ffffffff < 285d4967 S=6 s=3 (14) >12:34:23.649611 xid:cmd ffffffff < 285d4967 S=6 s=4 (14) >12:34:23.649703 xid:rsp d0515c32 > 285d4967 S=6 s=4 hubsi hint=8404 [ Computer IrCOMM ] (22) >12:34:23.799599 xid:cmd ffffffff < 285d4967 S=6 s=5 (14) >12:34:23.958548 xid:cmd ffffffff < 285d4967 S=6 s=* IrCOMM hint=8204 [ PDA/Palmtop IrCOMM ] (23) >12:34:26.001259 xid:cmd ffffffff < 285d4967 S=6 s=0 (14) >12:34:26.149236 xid:cmd ffffffff < 285d4967 S=6 s=1 (14) >12:34:26.299208 xid:cmd ffffffff < 285d4967 S=6 s=2 (14) >12:34:26.449170 xid:cmd ffffffff < 285d4967 S=6 s=3 (14) >12:34:26.599164 xid:cmd ffffffff < 285d4967 S=6 s=4 (14) >12:34:26.750102 xid:cmd ffffffff < 285d4967 S=6 s=5 (14) >12:34:26.750218 xid:rsp d0515c32 > 285d4967 S=6 s=5 hubsi hint=8404 [ Computer IrCOMM ] (22) >12:34:26.909112 xid:cmd ffffffff < 285d4967 S=6 s=* IrCOMM hint=8204 [ PDA/Palmtop IrCOMM ] (23) >12:34:28.951739 xid:cmd ffffffff < 285d4967 S=6 s=0 (14) >12:34:29.098744 xid:cmd ffffffff < 285d4967 S=6 s=1 (14) > > >I also tried to limit the speed by "echo 57600 (or 9600) > /proc/sys/net/irda/max_baud_rate" and adjusting the palm device. > >I'm using kernel 2.6.10 and its irda modules. irda-utils version 0.9.16. > >Thanks for any help! >hubert. > > >------------------------------------------------------- >SF email is sponsored by - The IT Product Guide >Read honest & candid reviews on hundreds of IT Products from real users. >Discover which products truly live up to the hype. Start reading now. >http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click >_______________________________________________ >irda-users mailing list >ird...@li... >http://lists.sourceforge.net/lists/listinfo/irda-users > > > > |