From: spamnix b. <spa...@gm...> - 2007-11-16 21:28:59
|
I am examining the throughput I can get between my server and a client over 85ms RTT. I am seeing different bandwidth in the client 'iperf output' from what the server is seeing. To be more precise I am doing the following: >server: iperf -s and then >client: iperf -c 'server ip' (am not using dual test) This is the output I am seeing: @client: [ 3] local (client ip) port (port#) connected with (server ip) port 5001 [ 3] 0.0-20.1 sec 359 MBytes 150 Mbits/sec @server: [ 6] local (server ip) port (port#) connected with (NAT ip) port (some port#) [ 6] 0.0-63.1 sec 359 MBytes 47.7 Mbits/sec Please observer the difference in bandwidth reported. Also the server is connected to the NAT router, could this be the reason why this connection is seeing less bandwidth, (maybe because of the overhead of mapping it to local ip). any information regarding this would be good. -Nishesh Bakshi Akamai Technologies |