Re: [IPCop-user] 3c905c-tx-m 10BaseT link problem

[Paul V. A. <pa...@no...>]

No joy.
Tried v1.4b3 same issues,
Tried setting NIC to autonegotiate using 3com's 3c90xcfg.exe,
Tried setting NIC to 10/half using 3com's 3c90xcfg.exe,
Ran diags on card with 3c90xcfg.exe and passed,
What am I missing?


Paul Van Allsburg wrote:
> Well,
> Netgear EN524 24port ethernet hub     - no connection
> HP J3300A Procurve 12port Ethernet hub- no connection
> 
> Netgear DS108 8port 10/100 hub        -works great!
> Cisco Catalyst 10/100 switch          -works great!
> 
> How can I force the card to run 10meg? The 2 100meg boxes above always 
> connect to the card at 100.  I would like to utilize the card with some 
> available 10m hubs.  I'll try ver. 1.4b3 and see if the problem exists 
> there also.
> Thanks,
> Paul
> 
> ja...@gu... wrote:
> 
>> What are the names / models of the hubs?  It can be a negotiation 
>> issue or even half.full duplex issue.
>>
>> jackb
>>
>>
>>> I have a 3c905c-tx-m card that refuses to connect to a 10meg ethernet 
>>> hub but links fine with a 100m switch.  I've tried the 0x0 10baseT 
>>> and 0x8 autonegotiate settings with no luck*.  Any pointers?
>>>
>>> Thanks,
>>> Paul
>>>
>>>
>>> *Documentation/networking/vortex.txt by Andrew Morton
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> IPCop-user mailing list
> IPC...@li...
> https://lists.sourceforge.net/lists/listinfo/ipcop-user
> 
>