Re: [Hplip-help] PSC 1210: Top margin problem

[Malcolm L. <mla...@gm...>]

It turns out that all I had to do was restart CUPS by running:
/etc/init.d/cupsys restart
Then the margin error stopped occurring and I can continue to use IPP to
share the printer.
Malcolm

On 2/22/07, Cauligi, Raghothama S <rag...@hp...> wrote:
>
>  Finish the installation on the Windows box. Then connect to your linux
> box in a file explorer window.
> If you have shared your printer on your linux box, you will see that
> printer icon. Double click on that
> and Windows will prompt you to install the driver for the device. Since
> you have already installed the
> driver, it should appear in the Windows' list - select HP for manufacturer
> and the model from the model box
> and finish up with the add printer wizard. You should be good to go.
> Raghu
>
>  ------------------------------
> *From:* Malcolm Lalkaka [mailto:mla...@gm...]
> *Sent:* Wednesday, February 21, 2007 5:32 PM
> *To:* Cauligi, Raghothama S; HPLIP Mailing List
> *Subject:* Re: [Hplip-help] PSC 1210: Top margin problem
>
> The problem is that I don't think the Windows driver for the printer from
> HP works for printing over a network. I just installs a lot of image editing
> software.
>
> In fact, the only way to install the Windows driver is by manually
> connecting the printer to it; otherwise, the driver installation will not
> continue. Part way through the installation, it asks me to connect the
> printer to the computer, but it doesn't give me the option of specifying
> that the printer is on the network.
>
> Malcolm
>
> On 2/21/07, Cauligi, Raghothama S <rag...@hp...> wrote:
> >
> >  See if you can change the margin settings on the Windows side.
> > You would be better served to install the PSC 1210 driver from HP on
> > your Windows box and share the
> > printer on your linux box via Samba. In this scenario, cups on linux
> > side will just forward the data it receives
> > from the Windows box unmodified and you can use the full features of the
> > printer from your Windows print driver.
> > Raghu
> >
> >  ------------------------------
> > *From:* hpl...@li... [mailto:
> > hpl...@li...] *On Behalf Of *Malcolm Lalkaka
> > *Sent:* Wednesday, February 21, 2007 12:07 AM
> > *To:* HPLIP Mailing List
> > *Subject:* [Hplip-help] PSC 1210: Top margin problem
> >
> >  Hello,
> >
> > I have set this printer up using CUPS and printing works perfectly from
> > the local GNU/Linux machine. I also set up the network printing; Windows XP
> > computers print to it using the Internet Printing Protocol (IPP) with the
> > Generic MS Publisher Imagesetter driver (a Postscript driver). The problem
> > is that when printing to the printer through Windows XP, the top margin on
> > each page is very large. Even if printing a text file with no margins, the
> > first line of text shows up almost an inch below the top of the Letter-sized
> > (US Letter) page. Is there any way to fix this?
> >
> > Thank you,
> > Malcolm
> > mla...@gm...
> > --------------------------------
> >
>
>


-- 
Malcolm
mla...@gm...
--------------------------------