From: <hal...@ya...> - 2005-11-20 21:09:13
|
--- Marcus Meissner <ma...@je...> wrote: > On Sun, Nov 20, 2005 at 07:47:30AM -0800, > hal...@ya... wrote: > > I'm using Debian Sarge. > > I run: > > gphoto2 --auto-detect > > and it detects nothing (just shows its listing > header). > > > > I checked using gphoto2 --list-cameras that it > > supports my Canon S40, and it does. > > I checked using gphoto2 --list-ports that it sees > usb, > > and it does. > > I checked using usbview that the camera is visible > to > > usbview, and it is > > (it sees the camera name, PowerShot S40). This is > also > > a check that my > > usb is set up correctly, it certainly seems to be. > > > > I went to the document at > > http://www.gphoto.org/doc/manual and checked > > section 4.3 on setting permissions. My Debian > Sarge > > distro has > > world read permissions set on /proc/bus/usb so > that > > seems OK. > > > syslog has no error messages. It has some entries > > about the usb device, > > as follows: > > Nov 20 16:40:52 pegasus kernel: usb 2-1: new full > > speed USB device using address 5 > > Nov 20 16:40:52 pegasus usb.agent[7753]: > usbcam: > > loaded successfully > > Nov 20 16:40:53 pegasus usb.agent[7753]: > > libgphoto2: loaded successfully > > Nov 20 16:41:48 pegasus kernel: usb 2-1: USB > > disconnect, address 5 > > > > (The last message is after I run the tests and > give up > > and unplug the > > camera). > > > > Any suggestions? > > So it should work. > > Can you send > gphoto2 --auto-detect --debug > output? > > Ciao, Marcus Sure, no problem. However, it's 71k. So I've cut out a lot of repetitive stuff, where it repeats exactly the same thing on a different port / camera driver / camera type. (I've left in the probe for "vendor 0x4a9, product 0x3056" which I think isthe Canon PowerShot S40.) Omissions are indicated by a line containing just three periods at the beginning: 0.003693 main(2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST: 0.003775 main(2): gphoto2 2.1.5 0.003794 main(2): gphoto2 has been compiled with the following options: 0.003805 main(2): + gcc (C compiler used) 0.003814 main(2): + popt (for handling command-line parameters) 0.003823 main(2): + exif (for displaying EXIF information) 0.003832 main(2): + cdk (for accessing configuration options) 0.003841 main(2): + no aa (for displaying live previews) 0.003850 main(2): + jpeg (for displaying live previews in JPEG format) 0.003859 main(2): + readline (for easy navigation in the shell) 0.003874 main(2): libgphoto2 2.1.5 0.003889 main(2): libgphoto2 has been compiled with the following options: 0.003899 main(2): + gcc (C compiler used) 0.003909 main(2): + EXIF (for special handling of EXIF files) 0.003919 main(2): + no ltdl (working around buggy libltdl, eh? :-) 0.003928 main(2): + /proc/meminfo (adapts cache size to memory available) 0.003941 main(2): libgphoto2_port 0.5.1 0.003956 main(2): libgphoto2_port has been compiled with the following options: 0.003966 main(2): + gcc (C compiler used) 0.003976 main(2): + USB (for USB cameras) 0.003984 main(2): + serial (for serial cameras) 0.003994 main(2): + no resmgr (serial port access and locking) 0.004003 main(2): + no baudboy (serial port locking) 0.004012 main(2): + no ttylock (serial port locking) 0.004021 main(2): + no lockdev (serial port locking) 0.004029 main(2): + no ltdl (working around buggy libltdl, eh? :-) 0.004408 gphoto2-abilities-list(2): Loading camera libraries in '/usr/lib/gphoto2/2.1.5'... 0.004435 gphoto2-abilities-list(2): Note that failing to load *.a and *.la is NOT an error! 0.004740 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_dimera3500.so'... 0.004973 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_agfa_cl20.so'... 0.005056 /agfa_cl20.c(2): * camera_abilities() 0.005139 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_aox.so'... 0.005292 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_barbie.so'... 0.005472 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_canon.so'... 0.005582 canon/library.c(2): camera_id() 0.005597 canon/library.c(2): camera_abilities() 0.006071 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_casio_qv.so'... ... 0.007114 ez200/library.c(2): Begin_Abilities 0.007140 ez200/library.c(2): End_Abilities 0.007200 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_fuji.so'... 0.007731 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_gsmart300.so'... 0.007938 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_iclick.so'... 0.008085 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_jamcam.so'... 0.008171 jamcam/jamcam.c(2): * camera_id 0.008185 jamcam/jamcam.c(2): * camera_abilities 0.008255 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_jd11.so'... 0.008419 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_panasonic_coolshot.so'... 0.008500 coolshot/coolshot.c(2): * camera_id 0.008515 coolshot/coolshot.c(2): * camera_abilities 0.008593 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_kodak_dc210.so'... ... 0.010200 l859/l859.c(2): Camera ID 0.010285 gphoto2-abilities-list(2): Trying to load '/usr/lib/gphoto2/2.1.5/libgphoto2_pccam300.so'... ... 0.095142 gp-port-info-list(2): Loading io-drivers from '/usr/lib/gphoto2_port/0.5.1'... 0.095359 gphoto2-port-serial(2): Trying to lock '/dev/ttyS0'... 0.095497 gphoto2-port-serial(2): Trying to lock '/dev/ttyS1'... ... 0.096568 gphoto2-port-core(2): Loaded 'Serial Port 0' (serial:/dev/ttyS0) from 'libgphoto2_port_serial.so' 0.096586 gphoto2-port-core(2): Loaded 'Serial Port 1' (serial:/dev/ttyS1) from 'libgphoto2_port_serial.so' ... 0.096907 gphoto2-port-core(2): Loaded '' (^serial) from 'libgphoto2_port_serial.so' 0.097432 gphoto2-port-core(2): Loaded 'Universal Serial Bus' (usb:) from 'libgphoto2_port_usb.so' 0.097480 gphoto2-port-info-list(2): Counting entries (35 available)... 0.097493 gphoto2-port-info-list(2): 34 regular entries available. 0.097503 gphoto2-port(2): Creating new device... 0.097518 gphoto2-port-info-list(2): Getting info of entry 0 (35 available)... 0.097594 gphoto2-port(2): Setting timeout to 500 millisecond(s)... 0.097610 gphoto2-port(2): Setting settings... 0.097622 gphoto2-port-info-list(2): Getting info of entry 1 (35 available)... 0.097691 gphoto2-port(2): Setting timeout to 500 millisecond(s)... 0.097704 gphoto2-port(2): Setting settings... ... 0.100447 gphoto2-port-info-list(2): Getting info of entry 33 (35 available)... 0.100815 gphoto2-port(2): Setting timeout to 5000 millisecond(s)... 0.100829 gphoto2-port(2): Setting settings... 0.100840 gphoto2-abilities-list.c(1): Auto-detecting USB cameras... 0.100882 gphoto2-port(0): Could not find USB device (vendor 0x553, product 0x202). Make sure this device is connected to t\he computer. ... 0.103119 gphoto2-port(0): Could not find USB device (vendor 0x4a9, product 0x3056). Make sure this device is connected to \the computer. ... 0.109360 gphoto2-port(2): Freeing port... 0.109373 gphoto2-port(2): Closing port... 0.109856 gp-camera(2): Freeing camera... 0.109876 gphoto2-port(2): Freeing port... 0.109894 libgphoto2/gphoto2-filesys.c(2): Clearing fscache LRU list... 0.109904 libgphoto2/gphoto2-filesys.c(2): fscache LRU list already empty 0.109913 gphoto2-filesystem(2): Internally deleting all folders from '/'... |